Airworthiness Directives; MD Helicopters, Inc. Model MD900 Helicopters

Transportation Department; Federal Aviation Administration · 2011

Read Airworthiness Directives; MD Helicopters, Inc. Model MD900 Helicopters by Transportation Department; Federal Aviation Administration (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/uslaw-fr-2011-17421.txt.

Description

Rule published in the Federal Register on 2011-07-15 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 41662-41665] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-17421] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011-0695; Directorate Identifier 2011-SW-001-AD; Amendment 39-16740; AD 2011-14-05] RIN 2120-AA64 Airworthiness Directives; MD Helicopters, Inc. Model MD900 Helicopters AGENCY: Federal Aviation Administration.

Catalog record

CREATORTransportation Department; Federal Aviation Administration
YEAR2011
COLLECTIONLAW
FORMATTXT
FILE SIZE18 KB
VERSION1.0
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEFederal Register

Source: https://www.federalregister.gov/documents/2011/07/15/2011-17421/airworthiness-directives-md-helicopters-inc-model-md900-helicopters

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Airworthiness Directives; MD Helicopters, Inc. Model MD900 Helicopters Citation: us:fr:2011-17421 Creator: Transportation Department; Federal Aviation Administration Year: 2011 Source-URL: https://www.federalregister.gov/documents/2011/07/15/2011-17421/airworthiness-directives-md-helicopters-inc-model-md900-helicopters Context: Rule published in the Federal Register on 2011-07-15 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 41662-41665] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-17421] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011-0695; Directorate Identifier 2011-SW-001-AD; Amendment 39-16740; AD 2011-14-05] RIN 2120-AA64 Airworthiness Directives; MD Helicopters, Inc. Model MD900 Helicopters AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments. ----------------------------------------------------------------------- SUMMARY: This amendment supersedes an existing airworthiness directive (AD) for MD Helicopters, Inc. (MDHI) Model MD900 helicopters. That AD currently requires visually inspecting the main rotor lower hub assembly (lower hub) for a crack, and if you find a crack, before further flight, replacing the unairworthy lower hub with an airworthy lower hub. Additionally, within 10 days of finding a cracked lower hub, the existing AD requires reporting the finding to the Los Angeles Aircraft Certification Office (LAACO). That AD was prompted by two reports of cracks detected in the hub in the area near the flex beam bolt hole locations during maintenance on two MDHI Model MD900 helicopters. Since we issued that AD, we determined that one manufacturer had incorrectly inserted flanged bushings into the lower hub bore that resulted in local corrosion, leading to fatigue cracking. Examination of lower hubs from the other manufacturer shows correct bushing installation. Therefore, this amendment limits the applicability to the affected lower hubs; retains the visual inspection but at a different compliance time; adds an eddy current inspection; retains the requirement to replace a cracked lower hub with an airworthy lower hub before further flight; and removes the requirement to report to the LAACO. The actions specified by this AD are intended to detect a crack in the lower hub and prevent failure of the lower hub and subsequent loss of control of the helicopter. DATES: This AD is effective August 1, 2011. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in the AD as of August 1, 2011. We must receive any comments on this AD by September 13, 2011. ADDRESSES: You may send comments by any of the following methods: Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the instructions for submitting comments. Fax: 202-493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. Hand Delivery: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this AD, contact MD Helicopters Inc., Attn: Customer Support Division, 4555 E. McDowell Rd., Mail Stop M615, Mesa, AZ 85215-9734, telephone 1-800-388-3378, fax 480-346-6813, or at http://www.mdhelicopters.com. [[Page 41663]] Examining the AD Docket You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Office (telephone (800) 647-5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt. FOR FURTHER INFORMATION CONTACT: Eric Schrieber, Aviation Safety Engineer, FAA, Los Angeles Aircraft Certification Office, Airframe Branch, 3960 Paramount Blvd., Lakewood, California 90712-4137, telephone (562) 627-5348, fax (562) 627-5210. SUPPLEMENTARY INFORMATION: Discussion On August 19, 2010, we issued Emergency AD (EAD) 2010-18-51. That EAD was prompted by two reports of cracks detected in the lower hub near the flex beam bolt hole location during maintenance. That EAD required, within 4 hours time-in-service (TIS), visually inspecting the lower hub for a crack and, if you find a crack, before further flight, replacing the lower hub with an airworthy lower hub and, within 10 days, reporting a cracked lower hub to the LAACO. We superseded EAD 2010-18-51 with EAD 2010-18-52, issued August 23, 2010, upon discovering a typographical error in the ``Applicability'' section of the EAD in the lower hub part number (P/N). EAD 2010-18-52 contained the same requirements as EAD 2010-18-51 but corrected the P/N for the lower hub. Actions Since That AD Was Issued Since we issued the AD, 5 additional lower hubs were found cracked. We determined that one manufacturer of lower hubs with serial numbers (S/Ns) beginning with 5009 (e.g., 5009-XXXX) had incorrectly inserted flanged bushings into the lower hub bore. This condition resulted in local corrosion leading to fatigue cracking. Examination of lower hubs from the other manufacturer shows correct bushing installation. Relevant Service Information We reviewed MDHI Service Bulletin SB900-117, dated January 14, 2011 (SB). The SB specifies an initial 100-hour and recurring 300-hour visual and eddy current inspections of the lower hub for a crack and, if there is a crack, replacing the lower hub with an airworthy lower hub. The inspections would be done at the stated intervals or at the next annual inspection, whichever occurs first. The SB also specifies replacing an affected lower hub within 3 years after the date of the SB. FAA's Determination We are issuing this AD because we evaluated all the relevant information and determined the unsafe condition described previously is likely to exist or develop in other helicopters of this same type design. AD Requirements This AD requires a visual inspection, and if necessary, an eddy current inspection of the lower hub for a crack. If there is a crack, the AD requires replacing the lower hub with an airworthy lower hub. This AD requires accomplishing these actions by following specified portions of the service information described previously, except as discussed under ``Differences Between the AD and the Service Information.'' Change to Existing AD This superseding AD changes the compliance time for the visual inspection and adds an eddy current inspection of the lower hub for a crack. This AD also removes the reporting requirement to the LAACO and the requirement for an OMB control number. This AD also reduces the applicability to only those helicopters with certain serial-numbered lower hubs installed. Differences Between the AD and the Service Information This AD does not require contacting the manufacturer or returning the lower hub assembly with a certain report. This AD also does not require the 300-hour inspection or replacing the lower hub within 3 years from the date of the SB because these actions do not fit our criteria for a Final rule, request for comments. FAA's Justification and Determination of the Effective Date An unsafe condition exists that requires the immediate adoption of this AD. The FAA has found that the risk to the flying public justifies waiving notice and comment prior to adoption of this rule because the previously described unsafe condition can adversely affect the structural integrity and controllability of the helicopter. The inspection is required within 100 hours TIS or during the annual inspection, whichever occurs first, unless done within the last 200 hours TIS. Since the affected helicopters could reach 100

Read the complete text