Notice of a Project Waiver of Section 1605 (Buy American Requirement) of the American Recovery and Reinvestment Act of 2009 (ARRA) to the Metropolitan Council Environmental Services of St. Paul, MN (MCES)

Environmental Protection Agency · 2011

Read Notice of a Project Waiver of Section 1605 (Buy American Requirement) of the American Recovery and Reinvestment Act of 2009 (ARRA) to the Metropolitan Council Environmental Services of St. Paul, MN (MCES) by Environmental Protection Agency (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/uslaw-fr-2011-16383.txt.

Description

Notice published in the Federal Register on 2011-06-29 by Environmental Protection Agency. Text from federalregister.gov (official edition: govinfo). [Pages 38164-38166] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-16383] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [FRL-9426-2] Notice of a Project Waiver of Section 1605 (Buy American Requirement) of the American Recovery and Reinvestment Act of 2009 (ARRA) to the Metropolitan Council Environmental Services of St. Paul, MN (MCES).

Catalog record

CREATOREnvironmental Protection Agency
YEAR2011
COLLECTIONLAW
FORMATTXT
FILE SIZE11 KB
VERSION1.0
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEFederal Register

Source: https://www.federalregister.gov/documents/2011/06/29/2011-16383/notice-of-a-project-waiver-of-section-1605-buy-american-requirement-of-the-american-recovery-and

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Notice of a Project Waiver of Section 1605 (Buy American Requirement) of the American Recovery and Reinvestment Act of 2009 (ARRA) to the Metropolitan Council Environmental Services of St. Paul, MN (MCES) Citation: us:fr:2011-16383 Creator: Environmental Protection Agency Year: 2011 Source-URL: https://www.federalregister.gov/documents/2011/06/29/2011-16383/notice-of-a-project-waiver-of-section-1605-buy-american-requirement-of-the-american-recovery-and Context: Notice published in the Federal Register on 2011-06-29 by Environmental Protection Agency. Text from federalregister.gov (official edition: govinfo). [Pages 38164-38166] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-16383] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [FRL-9426-2] Notice of a Project Waiver of Section 1605 (Buy American Requirement) of the American Recovery and Reinvestment Act of 2009 (ARRA) to the Metropolitan Council Environmental Services of St. Paul, MN (MCES) AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: The EPA is hereby granting a project waiver of the Buy American requirements of ARRA Section 1605 under the authority of Section 1605(b)(2) [manufactured goods are not produced in the United States of a satisfactory quality] to the Metropolitan Council Environmental Services (MCES) of St. Paul, Minnesota, for the purchase of one Parkson StrainPress SC-4 pressurized in-line sludge screen to process gravity thickened primary sludge at its Blue Lake Wastewater Treatment Plant located in Shakopee, Minnesota. This is a project- specific waiver and it only applies to the use of the specified product for the ARRA funded project being proposed. Any [[Page 38165]] other ARRA project that may wish to use the same product must apply for a separate waiver based on project-specific circumstances. This sludge screen, which is supplied by Parkson Corporation of Vernon Hills, Illinois, is manufactured in Germany, and meets MCES's performance specifications and requirements. The Regional Administrator is making this determination based on the review and recommendations of EPA Region 5's Water Division. MCES has provided sufficient documentation to support its request. The Assistant Administrator of the Office of Administration and Resources Management has concurred on this decision to make an exception to Section 1605 of ARRA. This action permits the purchase of one StrainPress SC-4 pressurized in-line sludge screen for the Blue Lake Wastewater Treatment Plant Solids Improvements project that may otherwise be prohibited under Section 1605(a) of the ARRA. DATES: Effective Date: June 29, 2011. FOR FURTHER INFORMATION CONTACT: Andrew Lausted, SRF Program Manager, (312) 886-0189, or Puja Lakhani, Office of Regional Counsel, (312) 353- 3190, U.S. EPA Region 5, 77 W. Jackson Blvd., Chicago, IL 60604. SUPPLEMENTARY INFORMATION: In accordance with ARRA Section 1605(c) and pursuant to Section 1605(b)(2) of Public Law 111-5, Buy American requirements, EPA hereby provides notice that it is granting a project waiver to MCES of St. Paul, Minnesota, for the acquisition of a Parkson StrainPress SC-4 pressurized in-line sludge screen that is manufactured in Germany. Section 1605 of the ARRA requires that none of the appropriated funds may be used for the construction, alteration, maintenance, or repair of a public building or public work unless all of the iron, steel, and manufactured goods used in the project are produced in the United States, or unless a waiver is provided to the recipient by the head of the appropriate agency, here EPA. A waiver may be provided if EPA determines that (1) Applying these requirements would be inconsistent with the public interest; (2) iron, steel, and the relevant manufactured goods are not produced in the United States in sufficient and reasonably available quantities and of a satisfactory quality; or (3) inclusion of iron, steel, and the relevant manufactured goods produced in the United States will increase the cost of the overall project by more than 25 percent. This pressurized in-line sludge screen will remove undesirable contaminants and debris from the waste primary sludge prior to the pelletizing process. MCES selected this particular sludge screen because it already has two Parkson screens at the facility, and a third screen is needed to accommodate increased wastewater flows and loading. This screen is an exact match for the existing screens. Additionally, spare parts are in stock, and staff are trained to operate and maintain the screen. Only the Parkson StrainPress SC-4 screen is small enough to fit into the designated treatment area at the Blue Lake facility. MCES's submissions clearly articulated functional reasons that justified their technical specifications and requirements. The April 28, 2009 EPA HQ Memorandum, ``Implementation of Buy American provisions of Public Law 111-5, the `American Recovery and Reinvestment Act of 2009','' defines reasonably available quantity as ``the quantity of iron, steel, or relevant manufactured good is available or will be available at the time needed and place needed, and in the proper form or specification as specified in the project plans and design.'' The applicant met the requirements specified for the availability inquiry as appropriate to the circumstances by conducting an extensive investigation into all possible sources for pressurized in-line sludge screens. Based on the investigation, three companies were found to manufacture the required sludge screens, but none were manufactured in the United States. Given the space limitations of the project and that the two existing Parkson sludge screens have operated effectively since 1999 and still have many years of useful life, MCES believes that a third screen would perform equally well in this specific application. Therefore, MCES contends that there is no domestic product of satisfactory quality available consistent with the specifications of this project. EPA's national contractor prepared a technical assessment report based on the submitted waiver request. The report determined that the waiver request submittal was complete, that adequate technical information was provided, and that the utility's claim that no U.S. manufacturer could provide the item was supported by the available evidence. Therefore, based on the information provided to EPA and to the best of our knowledge at this time, the Parkson StrainPress SC-4 pressurized in-line sludge screen necessary for this project is not manufactured in the United States, and no other U.S. manufactured product can meet MCES's project performance specifications and requirements. EPA has also evaluated MCES's request to determine if its submission is considered late or if it could be considered timely, as per the OMB Guidance at 2 CFR 176.120. EPA will generally regard waiver requests with respect to components that were specified in the bid solicitation or in a general/primary construction contract as ``late'' if submitted after the contract date. However, EPA could also determine that a request be evaluated as timely, though made after the date that the contract was signed, if the need for a waiver was not reasonably foreseeable. If the need for a waiver is reasonably foreseeable, then EPA could still apply discretion in these late cases as per the OMB Guidance, which says ``the award official may deny the request'' for a waiver. For those waiver requests that do not have a reasonably unforeseeable basis for lateness, but for which the waiver basis is valid and there is no apparent gain by the ARRA recipient or loss on behalf of the government, then EPA will still consider granting a waiver. In this case, there are no U.S. manufacturers that meet MCES's project specification for this pressurized in-line sludge screen. The waiver request was submitted after the contract was signed due to the large size of the project, with approximately 200 sub-contracts, which led

Read the complete text