Special Conditions: Pratt and Whitney Canada Model PW210S Turboshaft Engine

Transportation Department; Federal Aviation Administration · 2011

Read Special Conditions: Pratt and Whitney Canada Model PW210S Turboshaft Engine by Transportation Department; Federal Aviation Administration (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/uslaw-fr-2011-14113.txt.

Description

Rule published in the Federal Register on 2011-06-10 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 33981-33982] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-14113] ======================================================================= ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 33 [Docket No. NE130; Special Conditions No. 33-008-SCI] Special Conditions: Pratt and Whitney Canada Model PW210S Turboshaft Engine AGENCY: Federal Aviation Administration (FAA), DOT.

Catalog record

CREATORTransportation Department; Federal Aviation Administration
YEAR2011
COLLECTIONLAW
FORMATTXT
FILE SIZE11 KB
VERSION1.0
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEFederal Register

Source: https://www.federalregister.gov/documents/2011/06/10/2011-14113/special-conditions-pratt-and-whitney-canada-model-pw210s-turboshaft-engine

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Special Conditions: Pratt and Whitney Canada Model PW210S Turboshaft Engine Citation: us:fr:2011-14113 Creator: Transportation Department; Federal Aviation Administration Year: 2011 Source-URL: https://www.federalregister.gov/documents/2011/06/10/2011-14113/special-conditions-pratt-and-whitney-canada-model-pw210s-turboshaft-engine Context: Rule published in the Federal Register on 2011-06-10 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 33981-33982] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-14113] ======================================================================= ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 33 [Docket No. NE130; Special Conditions No. 33-008-SCI] Special Conditions: Pratt and Whitney Canada Model PW210S Turboshaft Engine AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final special conditions. ----------------------------------------------------------------------- SUMMARY: These special conditions are issued for Pratt and Whitney Canada (PWC) model PW210S engines. The engine model will have a novel or unusual design feature which is engine operation in auxiliary power unit (APU) mode. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the added safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards. DATES: The effective date of these special conditions is July 11, 2011. FOR FURTHER INFORMATION CONTACT: For technical questions concerning this rule contact Marc Bouthillier, ANE-111, Engine and Propeller Directorate, Aircraft Certification Service, 12 New England Executive Park, Burlington, Massachusetts 01803-5299; telephone (781) 238-7120; facsimile (781) 238-7199; e-mail [email protected]. For legal questions concerning this rule contact Vincent Bennett, ANE-7 Engine and Propeller Directorate, Aircraft Certification Service, 12 New England Executive Park, Burlington, Massachusetts 01803-5299; telephone (781) 238-7044; facsimile (781) 238-7055; e-mail [email protected]. SUPPLEMENTARY INFORMATION: Background On December 5, 2005, PWC applied for type certification for a new model PW210S turboshaft engine. This engine consists of a two stage compressor driven by a single stage uncooled turbine, and a two stage free power turbine driving a two stage reduction gearbox. The control system includes a dual channel full authority digital electronic control. The engine will incorporate a novel or unusual design feature, which is engine operation in auxiliary power unit (APU) mode. The applicable airworthiness standards do not contain adequate or appropriate airworthiness standards to address this design feature. These special conditions contain the additional airworthiness standards necessary to establish a level of safety equivalent to the level that would result from compliance with the applicable standards of airworthiness in effect on the date of application. Type Certification Basis Under the provisions of 14 CFR 21.17(a) and 21.101(a), PWC must show that the model PW210S turboshaft engine meets the provisions of the applicable regulations in effect on the date of application, unless otherwise specified by the FAA. The application date is December 5, 2005, which corresponds to 14 CFR part 33 Amendment 20. However, PWC has elected to demonstrate compliance to later amendments of part 33 for this model. Therefore, the certification basis for the PW210S model turboshaft engine will be part 33, effective February 1, 1965, amended by Amendments 33-1 through 33-24. The FAA has determined that the applicable airworthiness regulations in part 33, Amendments 1-24 inclusive, do not contain adequate or appropriate safety standards for the model PW210 turboshaft engine, because of a novel or unusual rating. Therefore, special conditions are prescribed under the provisions of 14 CFR 11.19 and 14 CFR 21.16. The FAA issues special conditions, as defined by 14 CFR 11.19, in accordance with 14 CFR 11.38, which become part of the type certification basis in accordance with Sec. 21.17(b)(2). Special conditions are initially applicable to the model for which they are issued. Should the type certificate for that model be amended later to include another related model that incorporates the same or similar novel or unusual design feature, or should any other model already included on the same type certificate be modified to incorporate the same or similar novel or unusual design feature, the special conditions would also apply to the other model. Novel or Unusual Design Features The PWC PW210S turbo shaft engine will incorporate a novel or unusual design feature which is engine operation in auxiliary power unit (APU) mode. This design feature is considered to be novel and unusual relative to the part 33 airworthiness standards. Discussion of Comments Notice of proposed special conditions, Notice No. 33-10-01-SC for the PW210S engine model was published on February 14, 2011 (76 FR 8321). One comment letter was received. The commenter stated that the part 1 definition included in the special condition may not be necessary, or may require clarification. The FAA does not agree. The definition is necessary to explain the engine function to which these special conditions apply, and the term is used within the rule itself. However, to improve clarity, each of the special condition subsections now includes a reference to APU mode operation. The commenter stated that the 400 cycle dynamic braking test is inappropriate for this engine certification program, that engine dynamics will be difficult to simulate in a test stand, and that an engine test of this type would be better addressed as part of part 29 rotorcraft certification testing. The FAA does not agree. This test is the same as conducted for turbopropeller engines under Sec. 33.96 and is applicable to turboshaft engines as well. We do not believe it is impractical to reasonably simulate the braking action input into the engine [[Page 33982]] type design, and that the effects of dynamic braking need to be demonstrated on the complete engine prior to issuing a type certificate. Lastly, a need for installation limitations or special instructions for continued airworthiness requirements could be identified based on the results from this test, making it impractical to wait for part 29 certification testing. The commenter stated that the locked rotor portion of the special condition tests needs to be conducted on a single engine, but the dynamic requirements can be addressed separately. The FAA concurs in part. We have concluded that an engine test is required to demonstrate the complete engine response to dynamic braking, however we do agree that the two elements of required testing (locked rotor and dynamic) can be conducted on separate test engines. The FAA has therefore revised paragraph (d) to eliminate the reference to paragraph (b) (400 cycle dynamic braking test), and therefore allows separate engine tests at the applicant's discretion. The FAA has also deleted proposed paragraph (0, which is a safety analysis requirement specific to dynamic responses. In this regard, existing Sec. 33.75 Safety Analysis is considered adequate when an engine test for dynamic braking is conducted per this special condition. Applicability These special conditions are applicable to the PWC PW210S turbo shaft engine. If PWC applies later for a change to the type certificate to include another closely related model incorporating the same novel or unusual design feature, these special conditions may also apply to that model as well, and would be made part of the certification basis for that model. Conclusion We reviewed the available data, including the comment received, and have determined that air safety and the public interest require adopting this special condition with the changes described above. This action affects only certain novel or unusual design features on one model of engine. It is not a rule

Read the complete text