Standards Improvement Project-Phase III
Labor Department; Occupational Safety and Health Administration · 2011
Read Standards Improvement Project-Phase III by Labor Department; Occupational Safety and Health Administration (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/uslaw-fr-2011-13517.txt.
Description
Rule published in the Federal Register on 2011-06-08 by Labor Department; Occupational Safety and Health Administration. Text from federalregister.gov (official edition: govinfo). [Pages 33590-33612] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-13517] [[Page 33589]] Vol. 76 Wednesday, No. 110 June 8, 2011 Part IV Department of Labor ----------------------------------------------------------------------- Occupational Safety and Health Administration ----------------------------------------------------------------------- 29 CFR Parts 1910, 1915, 1917 et al. Standards Improvement Project--Phase.
Catalog record
| CREATOR | Labor Department; Occupational Safety and Health Administration |
|---|---|
| YEAR | 2011 |
| COLLECTION | LAW |
| FORMAT | TXT |
| FILE SIZE | 157 KB |
| VERSION | 1.0 |
| LICENSE | Public Domain |
| RIGHTS | PUBLIC DOMAIN |
| SOURCE | Federal Register |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Standards Improvement Project-Phase III Citation: us:fr:2011-13517 Creator: Labor Department; Occupational Safety and Health Administration Year: 2011 Source-URL: https://www.federalregister.gov/documents/2011/06/08/2011-13517/standards-improvement-project-phase-iii Context: Rule published in the Federal Register on 2011-06-08 by Labor Department; Occupational Safety and Health Administration. Text from federalregister.gov (official edition: govinfo). [Pages 33590-33612] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-13517] [[Page 33589]] Vol. 76 Wednesday, No. 110 June 8, 2011 Part IV Department of Labor ----------------------------------------------------------------------- Occupational Safety and Health Administration ----------------------------------------------------------------------- 29 CFR Parts 1910, 1915, 1917 et al. Standards Improvement Project--Phase III; Final Rule Federal Register / Vol. 76, No. 110 / Wednesday, June 8, 2011 / Rules and Regulations [[Page 33590]] ----------------------------------------------------------------------- DEPARTMENT OF LABOR Occupational Safety and Health Administration 29 CFR Parts 1910, 1915, 1917, 1918, 1919, 1926, and 1928 [Docket No. OSHA-2006-0049] RIN 1218-AC19 Standards Improvement Project--Phase III AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: Phase III of the Standards Improvement Project (SIP-III) is the third in a series of rulemaking actions to improve and streamline OSHA standards. The Standards Improvement Project removes or revises individual requirements within rules that are confusing, outdated, duplicative, or inconsistent. OSHA identified several requirements for SIP-III (e.g., rigging, NIOSH records, and training certifications) for improvement based on the Agency's review of its standards, suggestions and comments from the public, or recommendations from the Office of Management and Budget (OMB). OSHA believes that improving these standards will help employers to better understand their obligations, promote safety and health for employees, lead to increased compliance, and reduce compliance costs. OSHA estimates that these changes will result in annualized savings for employers of over $45 million, and will reduce paperwork burden by 1.85 million hours annually. DATES: This final rule becomes effective on July 8, 2011. As this rule imposes no new burdens on employers, employers may comply with the revised provisions prior to the effective date, which is 30 days after publication of this final rule. The Director of the Federal Register approved the incorporation by reference of specific publications listed in this final rule under 5 U.S.C. 552(a) and 1 CFR 51 as of July 8, 2011 ADDRESSES: In compliance with 28 U.S.C. 2112(a)(2), OSHA designates the Associate Solicitor of Labor for Occupational Safety and Health, Office of the Solicitor, Room S-4004, U.S. Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210, to receive petitions for review of the final rule. FOR FURTHER INFORMATION CONTACT: Camilla McArthur, OSHA Office of Communications, Room N-3647, U.S. Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210; telephone (202) 693-1999. SUPPLEMENTARY INFORMATION: A. Exhibits Referenced in This Rule The exhibits referenced by OSHA in this rule are in Docket No. OSHA-2006-0049, which is the docket for this rulemaking. The docket is available at http://www.regulations.gov, the Federal eRulemaking Portal. In this notice, OSHA designates exhibits as ``ID.'' The digit(s) following this designation refer to the full document number at http://www.regulations.gov. For example, the exhibit number referenced as ID 0151.1 in this notice is document number OSHA-2006- 0049-0151.1 under the column labeled ``ID'' at http://www.regulations.gov; this document happens to be a comment submitted by the National fire Protection Association. Most exhibits, including public comments, supporting materials, meeting transcripts, and other documents, are available at http://www.regulations.gov; some exhibits (e.g., copyrighted material) are not available to read or download from that Web page. However, all materials in the docket are available for inspection and copying at the OSHA Docket Office, Room N-2625, U.S. Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210; telephone (202) 693- 2350. B. Table of Contents The following table of contents identifies the major sections of the preamble to the Standards Improvement Project--Phase III (SIP-III) final rule: I. Background A. Introduction B. Regulatory History II. Legal Considerations III. Summary and Explanation of the Final Rule IV. Final Economic Analysis and Regulatory Flexibility Analysis V. Federalism VI. Unfunded Mandates VII. Office of Management and Budget Review Under the Paperwork Reduction Act of 1995 VIII. State Plans IX. Authority and Signature X. The Final Standard I. Background A. Introduction Phase III of the Standards Improvement Project (SIP-III) is the third in a series of rulemaking actions to improve and streamline OSHA standards. Historically, the Standards Improvement Project removes or revises individual requirements within rules that are confusing, outdated, duplicative or inconsistent. OSHA believes that improving these standards helps employers to better understand their obligations, promotes safety and health for employees, and leads to increased compliance and reduced compliance costs. OSHA summarizes the revised standards and revisions below, and describes them in detail in section III, Summary and Explanation of the Final Rule. First, OSHA is revising the title of 29 CFR part 1910, subpart E, of the general industry standard, and is revising Sec. 1910.35 to incorporate by reference the most current version of the National Fire Protection Association's (NFPA) Life Safety Code. To provide greater flexibility, OSHA also added a second compliance alternative. OSHA made several minor revisions to other sections in this subpart to correspond to the new language in Sec. 1910.35. In subpart I, OSHA is deleting requirements that employers prepare and maintain written training certification records. OSHA does not believe that the training certification records required by the four standards provide a safety or health benefit to employees, nor are the burden hours and cost to employers justified. These standards are the general industry Personal Protective Equipment (PPE) standard (Sec. 1910.132); the shipyard employment PPE standard (Sec. 1915.152); and the general industry and construction Cadmium standards (Sec. Sec. 1910.1027 and 1926.1127). There are seven revisions to the Respiratory Protection standard at Sec. 1910.134. One revision clarifies which breathing-gas containers employers must provide pursuant to the standard (Sec. 1910.134(i)(9)). To provide additional clarification, OSHA is revising language in Appendix C of Sec. 1910.134, and updating the language of the DOT regulations referenced in Sec. 1910.134(i)(4)(i). OSHA also deleted duplicative and inconsistent statements in Appendix D of Sec. 1910.134, and also in the Asbestos standard for shipyards (Sec. 1915.1001) and construction (Sec. 1926.1101). OSHA revised paragraph (c)(4)(iv) of Sec. 1910.1003 to correct an inadvertent omission from the respiratory-protection requirements for four of the 13 carcinogen standards. Lastly, OSHA also removed the requirement to keep fit-test records from the 1,3-Butadiene standard (Sec. 1910.1051 (m)(3)). There are two revisions under subpart J. First, OSHA is revising and updating the definition of the term ``potable water'' in the Sanitation standards for general industry and construction (Sec. 1910.141(a)(2); Sec. 1926.51(a)(6)), and [[Page 33591]] the Field Sanitation standard for agriculture (Sec. 1928.110(b)). Second, OSHA is revising the Bloodborne Pathogens standard by removing the word ``hot'' from the definition of ``handwashing facilities'' at Sec. 1910.1030(b) in the phrase ``hot air drying machines,'' which permits employers to use new technologies (e.g., high-velocity air blowers) in the workplace. This revision also applies to sanitation standards for general industry (Sec. 1910.141(d)(2)(iv)), marine terminals (Sec. 1917.127(a)(1)(iii)), longshoring (Sec. 1918.95(a)(1)(iii)), and construction (Sec. 1926.51(f)(3)(iv)). OSHA is updating its standards regulating slings for general industry (Sec. 1910.184); shipyard employment (Sec. Sec. 1915.112, 1915.113, and 1915.118), and construction (Sec. 1926.251). Modifications to these standards include removing previous load- capacity tables (Sec. 1910.184, tables N-184-1, N-184-3 through N-184- 22; and G-1