Airworthiness Directives; Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190, 195, 206, 207, 210, T303, 336, and 337 Airplanes

Transportation Department; Federal Aviation Administration · 2011

Read Airworthiness Directives; Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190, 195, 206, 207, 210, T303, 336, and 337 Airplanes by Transportation Department; Federal Aviation Administration (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/uslaw-fr-2011-10988.txt.

Description

Rule published in the Federal Register on 2011-05-13 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 27865-27872] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-10988] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2010-1101; Directorate Identifier 2009-CE-013-AD; Amendment 39-16690; AD 2011-10-09] RIN 2120-AA64 Airworthiness Directives; Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177.

Catalog record

CREATORTransportation Department; Federal Aviation Administration
YEAR2011
COLLECTIONLAW
FORMATTXT
FILE SIZE31 KB
VERSION1.0
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCEFederal Register

Source: https://www.federalregister.gov/documents/2011/05/13/2011-10988/airworthiness-directives-cessna-aircraft-company-models-150-152-170-172-175-177-180-182-185-188-190

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Airworthiness Directives; Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190, 195, 206, 207, 210, T303, 336, and 337 Airplanes Citation: us:fr:2011-10988 Creator: Transportation Department; Federal Aviation Administration Year: 2011 Source-URL: https://www.federalregister.gov/documents/2011/05/13/2011-10988/airworthiness-directives-cessna-aircraft-company-models-150-152-170-172-175-177-180-182-185-188-190 Context: Rule published in the Federal Register on 2011-05-13 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 27865-27872] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-10988] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2010-1101; Directorate Identifier 2009-CE-013-AD; Amendment 39-16690; AD 2011-10-09] RIN 2120-AA64 Airworthiness Directives; Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190, 195, 206, 207, 210, T303, 336, and 337 Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: We are superseding an existing airworthiness directive (AD) for Cessna Aircraft Company (Cessna) 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190, 195, 206, 207, 210, T303, 336, and 337 series airplanes. That AD currently requires repetitive inspections and replacement of parts, if necessary, [[Page 27866]] of the seat rail and seat rail holes; seat pin engagement; seat rollers, washers, and axle bolts or bushings; wall thickness of roller housing and the tang; and lock pin springs. This new AD requires retaining all of the actions from the previous AD and adding steps to the inspection procedures in the previous AD. This AD was prompted by added steps to the inspection procedures, added revised figures, and clarification of some of the existing steps. We are issuing this AD to prevent seat slippage or the seat roller housing from departing the seat rail, which may consequently cause the pilot/copilot to be unable to reach all the controls. This failure could lead to the pilot/copilot losing control of the airplane. DATES: This AD is effective June 17, 2011. Examining the AD Docket You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The address for the Docket Office (phone: 800-647-5527) is Document Management Facility, U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Gary Park, Aerospace Engineer, ACE- 118W, Wichita Aircraft Certification Office (ACO), 1801 Airport Road, Room 100, Wichita, Kansas 67209; telephone: (316) 946-4123; fax: (316) 946-4107; e-mail: [email protected]. SUPPLEMENTARY INFORMATION: Discussion We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede airworthiness directive (AD) 87-20-03 R2, Amendment 39-6669 (55 FR 36264, September 5, 1990; published as Docket No. 86-CE-71-AD, Amdt. 39-6669). That AD applies to the specified products. AD 87-20-03 R2 requires repetitive inspections and replacement of parts, if necessary, of the seat rail and seat rail holes; seat pin engagement; seat rollers, washers, and axle bolts or bushings; wall thickness of roller housing and the tang; and lock pin springs. The NPRM published in the Federal Register on November 8, 2010 (75 FR 68543). That NPRM proposed to retain all of the actions from the previous AD and add steps to the inspection procedures in the previous AD. The additional steps involve inspections of the tang thickness and length on the seat roller housing. We also provided improved graphics for inspecting seat track hole wear and for inspecting proper seat lock pin engagement depth. We itemized the steps, in sequence, to provide clearer guidance for the inspector to do the inspections. Comments We gave the public the opportunity to participate in developing this AD. The following presents the comments received on the proposal and the FAA's response to each comment. Request Change to Compliance Time D.A., Ken Anderson, Don Barley, Timothy J. Berg, Joseph Carter, Gary W. Cleveland, Clifford Coy, Al Dyer, John M. Efinger, Greg Felton, Berry Gablin, Howard Greenberg, Steve James, Richard Koril, Michael Minton, Dustin J. Radford, Marc Stancy, Charles L. Trunck, and Walter Wasowski requested we change the inspection compliance time to annual inspections. They think that 100-hour time-in-service inspections are an excessive burden on manpower and an added expense with little benefit in safety. They also think the frequent inspections would be difficult to monitor. We disagree with this comment. The unsafe condition of excessive wear results from usage, not calendar time. The more an airplane is used, the more likely wear will develop, causing an unsafe condition. Parts cost will not be incurred unless the inspection results require parts replacement. FAA regulations require posting compliance to ADs in the aircraft logbook. The maintainer should record compliance with this AD, which includes the 100-hour inspections, in the aircraft logbook. We have not changed this final rule AD action based on this comment. Request Change to Applicability Based on Secondary Seat Stops Joseph Carter, Greg Felton, Donald L. Griffith, and Richard M. Warner requested we change the applicability based on the installation of inertial reel secondary seat stops. They think that if the primary seat lock fails and the seat slips, the secondary seat stops provide additional safety. We partially agree with this comment. We agree that the secondary seat stop provides additional safety for seat slippage. However, we disagree that secondary seat stops provide adequate safety for the unsafe condition associated with this AD action. The secondary seat stops may be installed only on one side of the airplane, so the pilot could occupy a seat without a secondary seat stop. Also, secondary seat stops will not prevent the seat from lifting off the seat track. We have not changed this final rule AD action based on this comment. Request To Remove Models 150, 152, and 188 From Applicability Mark Stancy requested we remove Cessna Models 150, 152, and 188 from the airplane Applicability. He thinks the seat travel for those models is too limited to justify this AD even if the locking pin were to slip. We disagree with this comment. Even a limited seat travel could affect short pilots' ability to reach the controls if the seat slips backwards due to failure of the seat system. This AD action not only requires inspections to prevent seat slippage but also requires inspections to prevent the seat from lifting off the seat track. We have not changed this final rule AD action based on this comment. Request Withdrawal of Proposed AD Action David Abler, Brian A. Andrus, James Barbee, Timothy J. Berg, Al Dyer, John M. Efinger, Berry Gamblin, Donald L. Giffith, Michael Minton, Robert J. Pasch, Dustin J. Radford, Charles L. Trunck, and Walter Wasowski requested we withdraw the proposed AD action because they think it adds no additional safety than AD 87-20-03 R2. We disagree with this comment. This AD action provides additional measurements in the inspections, more clarity in the descriptions of the required inspections, and provides improved graphics. Inadvertent seat movement continues to be reported. Also, we received a report of a seat separating from the seat track due to wear of the seat roller housing tangs. We have not changed this final

Read the complete text