Airworthiness Directives; Rolls-Royce plc RB211-Trent 800 Series Turbofan Engines
Transportation Department; Federal Aviation Administration · 2011
Read Airworthiness Directives; Rolls-Royce plc RB211-Trent 800 Series Turbofan Engines by Transportation Department; Federal Aviation Administration (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/uslaw-fr-2011-10520.txt.
Description
Rule published in the Federal Register on 2011-05-03 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 24796-24798] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-10520] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2008-1165; Directorate Identifier 2008-NE-38-AD; Amendment 39-16685; AD 2011-10-04] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc RB211-Trent 800 Series Turbofan Engines AGENCY: Federal Aviation.
Catalog record
| CREATOR | Transportation Department; Federal Aviation Administration |
|---|---|
| YEAR | 2011 |
| COLLECTION | LAW |
| FORMAT | TXT |
| FILE SIZE | 15 KB |
| VERSION | 1.0 |
| LICENSE | Public Domain |
| RIGHTS | PUBLIC DOMAIN |
| SOURCE | Federal Register |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Airworthiness Directives; Rolls-Royce plc RB211-Trent 800 Series Turbofan Engines Citation: us:fr:2011-10520 Creator: Transportation Department; Federal Aviation Administration Year: 2011 Source-URL: https://www.federalregister.gov/documents/2011/05/03/2011-10520/airworthiness-directives-rolls-royce-plc-rb211-trent-800-series-turbofan-engines Context: Rule published in the Federal Register on 2011-05-03 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 24796-24798] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-10520] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2008-1165; Directorate Identifier 2008-NE-38-AD; Amendment 39-16685; AD 2011-10-04] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc RB211-Trent 800 Series Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: During manufacture of high-pressure (HP) compressor stage 1 discs, a small number of parts have been rejected due to a machining defect that was found during inspection. Analysis of the possibility of less severe examples having been undetected and passed into service has concluded that action is required to reduce the risk of failure. It was therefore necessary to reduce the life limit. The HP compressor stage 1 disc is part of the HP compressor stage 1-4 shaft, part number (P/N) FK32580. We are issuing this AD to prevent failure of the HP compressor stage 1 disc, uncontained engine failure, and damage to the airplane. DATES: This AD becomes effective June 7, 2011. ADDRESSES: The Docket Operations office is located at Docket Management Facility, U.S. Department of Transportation, 1200 New Jersey Avenue, SE., West Building Ground Floor, Room W12-140, Washington, DC 20590- 0001. FOR FURTHER INFORMATION CONTACT: Alan Strom, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA 01803; e-mail: [email protected]; telephone (781) 238-7143; fax (781) 238-7199. SUPPLEMENTARY INFORMATION: Discussion We issued a notice of proposed rulemaking (NPRM) and a supplemental notice of proposed rulemaking (SNPRM) to amend 14 CFR part 39 to include an AD that would apply to the specified products. That NPRM was published in the Federal Register on February 18, 2009 (74 FR 7563) and that SNPRM was published in the Federal Register on October 4, 2010 (75 FR 61114). That SNPRM proposed to correct an unsafe condition for the specified products. The MCAI states that: During manufacture of high-pressure (HP) compressor stage 1 discs, a small number of parts have been rejected due to a machining defect that was found during inspection. Analysis of the possibility of less severe examples having been undetected and passed into service has concluded that action is required to reduce the risk of failure. It was therefore necessary to reduce the life limit. The HP compressor stage 1 disc is part of the HP compressor stage 1-4 shaft, P/N FK32580. Since we issued the original NPRM on February 10, 2009 (74 FR 7563, February 18, 2009), EASA issued AD 2010-0087, dated May 5, 2010 (corrected May 6, 2010), which retains certain requirements of superseded EASA AD 2008-0099, and imposes more restrictive life limits in the Heavy Flight Profile Parts. You may obtain further information by examining the MCAI in the AD docket. Comments We gave the public the opportunity to participate in developing this AD. We considered the comments received. Request To Revise the Compliance Times Four commenters, American Airlines, Delta Airlines, Rolls-Royce plc, and The Boeing Company, request that we revise the compliance times to be consistent with the service bulletin and the airworthiness limitations section (ALS) of the engine manual. Doing this would account for the later AD release date and for the entire Trent 800 series fleet instead of just certain US operators' expected cyclic usage. The commenters state that the proposed requirements would have a severe adverse economic impact to operators relative to the service bulletin requirements. The simplified compliance requirements in the SNPRM relative to the service bulletin requirements, may not accurately reflect the risk of an uncontained event, and are confusing. We do not agree. The requirements in the SNPRM were developed to minimize the risk of uncontained disc failure, based on the age of the parts in the field at the time the SNPRM was issued. The service bulletin requirements were developed at a time when the age of the parts in service was lower than when the SNPRM was issued. Because the risk of failure increases as the age of the parts in the field increase, any revision to the requirements of the SNPRM would again have to take the increased age of the parts in service into account. As such, an analysis would result in removal requirements more stringent than the requirements in the SNPRM, and a follow-on NPRM would be required. Therefore, we determined that it is in the public interest to keep the removal requirements the same as published in the SNPRM. We did not change the AD. Request for Clarity and Interpretation Delta Airlines states that it would be helpful if we could provide some clarity in the AD as to how an operator should interpret the differing information between the AD, the ALS of the Rolls-Royce Time Limits Manual, and the service bulletin. The commenter is concerned that there will be three locations where the life limit of the [[Page 24797]] shaft, P/N FK32580, is specified, and all three have different data. We do not agree. The AD and the ALS take precedence over the service bulletin. Operators must comply with the AD and the ALS. We did not change the AD. Question on Reworked Part Delta Airlines asks for clarification as to whether a part reworked from P/N FK32580 to FW61622, is still required to be removed in accordance with paragraphs (e)(1) and (e)(2) of the AD. The commenter is unsure if a reworked part can be returned to service under the life limit of the new part number. The AD applies only to P/N FK32580. If the part is reworked to a different P/N, the requirements of the new P/N would apply. We did not change the AD. Request To Use the Service Bulletin Method American Airlines requests that we revise the AD to use the service bulletin method of determining the number of cycles before removal is required; specifically, based on a date before the effective date of the AD. The commenter states that the simplified compliance in the SNPRM would result in early engine removal and a cumulative loss of about eleven engine-years of useful service to American Airlines. We do not agree. The compliance thresholds in the AD are a function of usage, which is not directly related to calendar dates. We did not change the AD. Request To Update Contact Information Rolls-Royce plc requests that we update their contact information in the AD to: Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby, England, DE248BJ, telephone: 011-44-1332-242424; fax: 011-44- 1332-245418, or e-mail: http://www.rolls-royce.com/contact/civil_team.jsp. We agree and changed the AD. Conclusion We reviewed the available data and determined that air safety and the public interest require adopting the AD with the change described previously.