Effect of 3D-printed model base height on thickness distribution of thermoformed zendura FLX dual-layer clear aligners: an in vitro study
Thi-Bich-Van Tran, Ngoc-Anh-Thu Pham · 2026
Read Effect of 3D-printed model base height on thickness distribution of thermoformed zendura FLX dual-layer clear aligners: an in vitro study by Thi-Bich-Van Tran, Ngoc-Anh-Thu Pham (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-13630649.txt.
Description
Thi-Bich-Van Tran and Ngoc-Anh-Thu Pham measure how model base height changes clear aligner thickness. Their in vitro study from twenty twenty-six uses Zendura FLX dual-layer material. Heat forming thins aligner plastic in uneven ways. That thinning can change how an aligner fits and performs.
Forty aligners were formed over printed upper jaw models. Four base heights were tested, with ten aligners in each group. Thickness was checked at several teeth, from front teeth to molars. Average thickness fell steadily as base height rose. The tallest bases gave the thinnest aligners in the results shown. Dental labs can use these findings when they set model height for dual-layer aligners.
Catalog record
| CREATOR | Thi-Bich-Van Tran, Ngoc-Anh-Thu Pham |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 30 KB |
| VERSION | 1.0 |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |