Effect of Different Polishing Systems on the Surface Roughness of 3D-Printed Resins

Nilge Sarimehmetoglu, Huseyin Simsek · 2026

Read Effect of Different Polishing Systems on the Surface Roughness of 3D-Printed Resins by Nilge Sarimehmetoglu, Huseyin Simsek (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-13608553.txt.

Description

Nilge Sarimehmetoglu and Huseyin Simsek report a lab study from two thousand twenty-six on polishing 3D-printed crown resins to a smooth finish. Rough surfaces on printed crowns invite plaque and wear, so finishing matters for clinical success. The team tested four polishing systems on two commercial crown resins.

Eighty disc samples were polished and measured with a non-contact optical tool before and after. Every system cut roughness significantly, halving the median value overall. One system gave the lowest final roughness for both resins, while another gave the lowest average across time points. Resin type itself did not matter; the polishing system did. All finished surfaces stayed below the clinically relevant roughness threshold, so any system passed, with the best choice depending on resin.

Catalog record

CREATORNilge Sarimehmetoglu, Huseyin Simsek
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE26 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC13608553

Browse the full library · About the Tower of Babel