Electron Beam Crosslinking as a Strategy for the Synthesis of Pectin/PVA Aerogels: Effect of Concentration and Radiation Dose

Dawid Szymborski, Radosław Wach, Pavel Gurikov, Anna Strąkowska, Krzysztof Strzelec, Maher Saifi, Renata Boris, Agnė Kairytė · 2026

Read Electron Beam Crosslinking as a Strategy for the Synthesis of Pectin/PVA Aerogels: Effect of Concentration and Radiation Dose by Dawid Szymborski, Radosław Wach, Pavel Gurikov, Anna Strąkowska, Krzysztof Strzelec, Maher Saifi, Renata Boris, Agnė Kairytė (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-13607514.txt.

Introduction

Dawid Szymborski and seven colleagues published a materials study in two thousand twenty-six on making aerogels with an electron beam. Aerogels are feather-light porous solids. Radiation can link polymer chains into gels, but its use for aerogels was little explored.

The team crosslinked pectin, a fruit polysaccharide, with a synthetic partner polymer in water using electron beam doses. They varied the mix and the dose and measured structure, texture, and strength. The composite aerogels reached very high surface areas and over ninety-one percent porosity. A freeze-thaw comparison material scored far lower on both. The authors call radiation linking a clean way to engineer stable, porous gels.

Catalog record

CREATORDawid Szymborski, Radosław Wach, Pavel Gurikov, Anna Strąkowska, Krzysztof Strzelec, Maher Saifi, Renata Boris, Agnė Kairytė
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE49 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC13607514

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Electron Beam Crosslinking as a Strategy for the Synthesis of Pectin/PVA Aerogels: Effect of Concentration and Radiation Dose Authors: Dawid Szymborski, Radosław Wach, Pavel Gurikov, Anna Strąkowska, Krzysztof Strzelec, Maher Saifi, Renata Boris, Agnė Kairytė Published: 2026 ABSTRACT Radiation techniques represent an innovative and alternative method for polymer gelation or crosslinking; their application in aerogel research has not been extensively investigated. The irradiation of polymer solutions, either with or without a crosslinking agent, may result in stable polymer gels with a highly developed mesoporous structure. In this study, the effect of the pectin polysaccharide concentration, the presence of PVA, and the dose of ionizing radiation (27–58 kGy) were systematically investigated, particularly with respect to the structural, textural, and mechanical properties. The pectin/PVA and PVA were crosslinked in aqueous solution via ionizing radiation using an electron beam. The results demonstrated that the radiation crosslinking of a hydrophilic synthetic polymer in the presence of natural polysaccharides, such as pectin, is an effective strategy for engineering porous materials with a controlled structure, namely aerogels, of good stability, and favorable functional properties. The resulting composite aerogels were characterized by a BET-determined specific surface area of 200–241 m2/g and an estimated porosity of over 91%, compared with values of 28–46 m2/g, 0.22 g/cm3 and approximately 81.5% for aerogels produced using the freeze–thaw method. 1. Introduction In 1932, Samuel Kistler was the first who reported a material in which the liquid was replaced by air, thereby producing a material characterized by a particularly low density and high porosity with a high specific surface area. This pioneering discovery initiated a research trajectory that focused on synthesizing materials with diverse properties and applications. Now, aerogels are the most porous materials known and they are obtained from gels where the liquid medium is replaced by gas, and the removal of bulking agents does not compromise their properties or structure. One of their most unique properties is their very low thermal conductivity, for instance the aerogel from silica, having >90% porosity with a thermal conductivity of 12–20 mW·m−1·K−1, which is greatly lesser than the conductivity of regular insulation materials [1]. Originally, aerogels were primarily synthesized from inorganic materials, such as silica. Nevertheless, their fragility and brittleness have limited their wider application, especially in dynamic or heavy-duty environments [2,3]. Recent developments in the field of bio-based aerogels have highlighted the potential of combining polyvinyl alcohol (PVA) with natural polymers such as chitosan, alginate, or lignin to enhance biodegradability and environmental sustainability without compromising mechanical integrity or porosity. Yang et al. demonstrated that lignin nanoparticles incorporated into PVA/chitosan hydrogels confer antioxidant and antibacterial properties whilst maintaining the integrity of the network [4], whilst Zhang et al. developed a composite hydrogel based on lignin, chitosan, and PVA for use in wound dressings [5]. A more comprehensive review of lignin-based hydrogel systems and their biomedical applications was presented by Hachimi Alaoui et al. [6], whilst Okutucu [7] focused specifically on bio-based aerogels. Seifi et al. demonstrated that dual-network hydrogels of chitosan, alginate, and PVA, reinforced with carbon nanomaterials, can serve as biomimetic scaffolds for bone regeneration [8]. Consequently, research efforts are focused on developing aerogels from various materials. Polyvinyl alcohol is an example of a hydrophilic, water-soluble polymer characterized by low toxicity and biocompatibility that may be an interesting alternative for aerogels. Furthermore, it contains hydroxyl groups that may participate in various reactions, making the polymer easy to functionalize in order to enhance its properties [9,10]. Several successful attempts have been made to develop a PVA aerogel. For instance, the freeze–thaw method was employed to produce a thin, stable gel film, which was subsequently dried in supercritical carbon dioxide [9]. The freeze–thawing method leads to the formation of physical crosslinking and therefore results in a physical hydrogel. However, the freezing of an aqueous PVA solution limits the spatial movement of long polymer chains and allows hydroxyl groups to form hydrogen bonds. Subsequent thawing of the sample restores the mobility of the polymer chains, resulting in a rearrangement of the structure and bringing successive hydroxyl groups closer together to form additional hydrogen bonds in the next freezing cycle. The literature still lacks reports on obtaining a PVA aerogel with a defined specific surface area using the freeze–thaw method. An often discussed challenge in this approach is the influence of the ice crystal morphology on the resulting pore architecture, which varies depending on the cooling rate, initial polymer concentration, and presence of additives, particularly making nucleation centers [11]. Freeze–thaw cycles, while a simple and non-toxic method (as it does not involve initiators or crosslinkers), typically lead to an inhomogeneous structure, particularly in bulky samples where heat transfer is limited [12]. Furthermore, emerging fabrication strategies such as 3D printing of aerogel inks and the direct ink writing (DIW) of PVA-based precursors offer novel ways to control the aerogel architecture at multiple length scales [13,14]. This allows the development of anisotropic structures with tunable mechanical and thermal behavior, which are promising for wearable electronics and thermal insulation layers, for instance in aerospace applications [14,15]. In recent years, several reports have focused on pectin aerogels [16,17,18]. Pectins are complex polysaccharides and oligosaccharides comprising mainly D-galacturonic acid residues linked by α-1,4 glycosidic bonds, partially esterified with methyl groups. The synthesis of aerogels from these natural materials has been accomplished through the utilization of crosslinking initiated by a pH change or involving divalent calcium cations. The resulting materials have been found to exhibit a high specific surface area (400–600 m2/g), and their primary applications have centered on the domain of drug delivery systems [18]. The use of radiation to initiate crosslinking and gel formation, whether with or without a crosslinking agent, is efficient and rapid, as it may take only a few seconds or minutes. Nevertheless, achieving the crosslinking of pectin in aqueous solutions of moderate concentrations (<10%) requires a crosslinking agent. Functionalized polysaccharides can undergo crosslinking, forming a network structure after irradiation in an aqueous solution. It was demonstrated that the crosslinking of some polysaccharides, especially without crosslinking agents, is possible with radiation [19]. However, the efficiency of such crosslinking is too low to produce a gel stable enough that it can subsequently undergo solvent exchange and drying in supercritical carbon dioxide. It is therefore feasible to use a crosslinking agent, as in the case of carboxymethyl chitosan [20], or employ internal unsaturated bonds capable of polymerization, which has been demonstrated, for instance, for dextran methacrylate [21]. An alternative route may be to admixture a synthetic hydrophilic polymer capable for generating active radicals prone to recombination, also involving radicals, in a polysaccharide; one example is poly(vinyl alcohol). The irradiation of PVA in an aqueous solution [22,23] leads, through transient products of water radiolysis, to the formation of free radicals on macromolecules that participate in the crosslinking of PVA, resulting in stable hydrogels [24,25]. The advantage of this method is that it does not require the use of crosslinking agents, which are often toxic, as compounds bearing unsaturated bonds are highly reactive. Radiation engineering, specifically polymer crosslinking, is used to produce wound dressings or scaffolds for drug delivery, among other applications [26,27]. Radiation-induced crosslinking also offers greater control over the network density and crosslinking homogeneity, especially when processing large-volume samples. Drying

Read the complete text