Tribological and Mechanical Performance of 3D-Printed Polymers for Water-Lubricated Sliding Bearings
Jolanta Krupa, Jędrzej Blaut, Mariusz Warzecha, Mateusz Kozioł, Łukasz Breńkacz · 2026
Read Tribological and Mechanical Performance of 3D-Printed Polymers for Water-Lubricated Sliding Bearings by Jolanta Krupa, Jędrzej Blaut, Mariusz Warzecha, Mateusz Kozioł, Łukasz Breńkacz (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-13565924.txt.
Description
Jolanta Krupa, Jędrzej Blaut, Mariusz Warzecha, Mateusz Kozioł, and Łukasz Breńkacz test 3D-printed polymers for water-lubricated sliding bearings. Their 2026 paper uses fused filament fabrication to make candidate bearing materials.
Specimens from four materials were analyzed for surface profile and mechanical properties by instrumented indentation. Tribological behavior was checked with a pin-on-disc setup. Harder material is usually thought to resist wear better. Yet the material with the lowest wear in their tests had the lowest hardness of all. Wear mechanisms, wear products, and tribolayer formation seem to matter as much as hardness. The findings guide material choice for printed bearings.
Catalog record
| CREATOR | Jolanta Krupa, Jędrzej Blaut, Mariusz Warzecha, Mateusz Kozioł, Łukasz Breńkacz |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38 KB |
| VERSION | 1.0 |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |