Process optimization of adsorbent production from waste printed circuit board non-metallic fractions based on climate-change impact and cumulative energy demand

Junaid Saleem, Zubair Khalid Baig Moghal, Gordon McKay · 2026

Read Process optimization of adsorbent production from waste printed circuit board non-metallic fractions based on climate-change impact and cumulative energy demand by Junaid Saleem, Zubair Khalid Baig Moghal, Gordon McKay (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-13537037.txt.

Description

Saleem, Moghal, and McKay weighed greener routes in twenty twenty-six to turn waste circuit board scraps into water-cleaning soaks. The non-metal part of board waste is hard to reuse and loads landfills. Four make routes were scored from start to gate on climate cost and energy use.

The best route cut climate cost and energy by more than four fifths. That route works the scrap as a thick paste, not a wet slurry. Power for drying and heat steps drove most of the load in all routes. A chem share grew as power loads fell, they note.

Catalog record

CREATORJunaid Saleem, Zubair Khalid Baig Moghal, Gordon McKay
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE36 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC13537037

Browse the full library · About the Tower of Babel