Force systems of direct printed and thermoformed aligners with different trimlines during rotational movements: an in vitro analysis

Emilia von Waldthausen, Lisa-Marie Mai, Philipp Meyer-Marcotty, Anja Quast, Jonas Q Schmid, Phillipp Brockmeyer, Wolfram Hahn, Bernhard Wiechens · 2026

Read Force systems of direct printed and thermoformed aligners with different trimlines during rotational movements: an in vitro analysis by Emilia von Waldthausen, Lisa-Marie Mai, Philipp Meyer-Marcotty, Anja Quast, Jonas Q Schmid, Phillipp Brockmeyer, Wolfram Hahn, Bernhard Wiechens (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/PMC13287184.txt.

Description

Emilia von Waldthausen and colleagues ran bench tests in 2026 comparing clear dental aligners made by heat forming with aligners printed directly, during small rotations of an upper front tooth. A model tooth was turned by two degrees while sensors recorded forces for an hour.

Heat-formed aligners pushed much harder in the front-to-back direction and then lost force quickly after an early peak. Printed versions, with either a straight or a scalloped edge, delivered gentler forces that rose slowly and levelled off. Printed aligners also matched planned thickness more closely. The authors say the steadier force control deserves testing in patients before clinical claims are made.

Catalog record

CREATOREmilia von Waldthausen, Lisa-Marie Mai, Philipp Meyer-Marcotty, Anja Quast, Jonas Q Schmid, Phillipp Brockmeyer, Wolfram Hahn, Bernhard Wiechens
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39855
LICENSEhttps://creativecommons.org/licenses/by/4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/article/MED/PMC13287184

Browse the full library · About the Tower of Babel