Effect of artificial toothbrushing on wear, surface roughness and hardness of additively manufactured and milled resin-based restorative materials: an in vitro study

Yasser M Aly, Mohamed Mahmoud El-Kateb, Nodar Mohamed Ghrebi · 2026

Read Effect of artificial toothbrushing on wear, surface roughness and hardness of additively manufactured and milled resin-based restorative materials: an in vitro study by Yasser M Aly, Mohamed Mahmoud El-Kateb, Nodar Mohamed Ghrebi (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-13218024.txt.

Description

Crowns and fillings now come off printers and milling machines, and patients will brush them for years. Yasser Aly, Mohamed Mahmoud El-Kateb, and Nodar Mohamed Ghrebi simulated that brushing in 2026 on three resin materials to see which surface survives.

Ten bar-shaped samples of each material, two printed resins and one milled block, were weighed and tested for hardness and roughness, then run through a brushing machine and tested again. Weight loss measured wear. Standard statistics compared the materials and the before-after changes. The study design speaks to a practical dental question: whether the new printable resins hold their finish as well as milled ones under daily hygiene.

Catalog record

CREATORYasser M Aly, Mohamed Mahmoud El-Kateb, Nodar Mohamed Ghrebi
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC13218024

Browse the full library · About the Tower of Babel