Comparative Analysis of AWJM Performance in FFF-Printed PLA and PLA–CF: Influence of Process Parameters and Cutting Regions

Pedro F. Mayuet Ares, Lucía Rodríguez-Parada, Sergio de la Rosa, Moises Batista · 2026

Read Comparative Analysis of AWJM Performance in FFF-Printed PLA and PLA–CF: Influence of Process Parameters and Cutting Regions by Pedro F. Mayuet Ares, Lucía Rodríguez-Parada, Sergio de la Rosa, Moises Batista (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-13211052.txt.

Description

Pedro Mayuet Ares and co-authors tested in 2026 how well a gritty water jet cuts two 3D-printed plastics: plain PLA and a carbon-fiber version. Printed parts often need finishing, and the jet cuts without heat damage. The team varied water pressure, travel speed, and abrasive flow across a full grid of settings.

Pressure and speed ruled the results, while abrasive flow mattered little in the tested range. Cut quality also changed along the cut's depth: a smooth middle band beat the rough bottom, where the jet loses energy. The fiber version behaved much like the plain one, with small gains. Statistics confirmed settings matter more than material. The authors offer tuning guidance for finishing printed polymers.

Catalog record

CREATORPedro F. Mayuet Ares, Lucía Rodríguez-Parada, Sergio de la Rosa, Moises Batista
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE56 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC13211052

Browse the full library · About the Tower of Babel