Influence of Water Storage on the Mechanical Properties of 3D-Printed Aligners: An In Vitro Study

Kathrin Puchert, Paul Ritzert, Sebastian Wille, Jusef Naim, Sinan Şen · 2025

Read Influence of Water Storage on the Mechanical Properties of 3D-Printed Aligners: An In Vitro Study by Kathrin Puchert, Paul Ritzert, Sebastian Wille, Jusef Naim, Sinan Şen (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-12838107.txt.

Description

Kathrin Puchert and co-authors present a 2025 lab study of how water storage changes the strength of 3D-printed teeth aligners. Printed aligners could replace the heat-shaped kind, but they sit in a wet mouth all day. The team asked whether soaking weakens them, and how they compare with the standard plastic.

Three printed resins and one standard foil were tested before and after fourteen days in warm water. Bending and dent tests, wear checks, and swelling measures were run on all samples. Every printed sample lost strength after soaking, and two resins were weaker than the foil overall. The results set care and material targets for printed aligners.

Catalog record

CREATORKathrin Puchert, Paul Ritzert, Sebastian Wille, Jusef Naim, Sinan Şen
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC12838107

Browse the full library · About the Tower of Babel