Embrasure aligner fit and thickness in 3D-printed and thermoformed aligners: a microcomputed tomography study

Ho-Jin Kim, Hyo-Sang Park · 2025

Read Embrasure aligner fit and thickness in 3D-printed and thermoformed aligners: a microcomputed tomography study by Ho-Jin Kim, Hyo-Sang Park (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-12748497.txt.

Description

Ho-Jin Kim and Hyo-Sang Park compare how two kinds of teeth aligners fit, in a 2025 study. Clear aligners straighten teeth, and their fit in the small gaps between teeth matters. The team compared aligners made by 3D printing with ones shaped by heat forming. Thirty aligners were made and set on an upper jaw model.

Fine X-ray scans measured gap size and wall thickness at two heights on each aligner. Printed aligners with a small built-in offset fit the gaps best. Heat-formed aligners grew much thinner during shaping. Printed ones, by contrast, grew thicker than planned. The fit edge held at both heights for the offset printed group. Dentists gain clear guidance on which build to pick.

Catalog record

CREATORHo-Jin Kim, Hyo-Sang Park
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE43 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC12748497

Browse the full library · About the Tower of Babel