Turning Data Optimization of Titanium Alloy Produced by Casting and DMLS
Ksenia Latosińska, Wojciech Zębala, Ludmila Kučerová · 2025
Read Turning Data Optimization of Titanium Alloy Produced by Casting and DMLS by Ksenia Latosińska, Wojciech Zębala, Ludmila Kučerová (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-12735135.txt.
Description
Ksenia Latosińska and co-authors tune the lathe turning of a titanium alloy made two ways in two thousand twenty-five. Ti6Al4V parts can be cast or laser-sintered from powder, and the sintered kind's fast heating leaves a distinct inner grain. That grain changes how the metal cuts.
Trials varied cutting settings and tracked force, surface roughness, and chip shape for both stock types. Hardening during the cut and the effect of the cut layer's cross-section shape were also gauged. Their optimization seeks the lowest cutting force that still leaves a fine finish. Reshaping the cut layer, they found, let turning run with sharply lower specific force. A worked shop example shows the method in use.
Catalog record
| CREATOR | Ksenia Latosińska, Wojciech Zębala, Ludmila Kučerová |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 29 KB |
| VERSION | 1.0 |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |