Effects of Building Orientation and Raster Angle on the Mechanical Properties of Selected Materials Used in FFF Techniques

Piotr Dziewit, Kamil Rajkowski, Paweł Płatek, Alexander Yu Churyumov · 2024

Read Effects of Building Orientation and Raster Angle on the Mechanical Properties of Selected Materials Used in FFF Techniques by Piotr Dziewit, Kamil Rajkowski, Paweł Płatek, Alexander Yu Churyumov (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-11728033.txt.

Description

Dziewit and co-authors test how print direction and raster angle change the strength of 3D-printed parts, in this 2024 paper. Fused filament printing builds parts layer by layer, so orientation should matter. Impact behavior of printed pieces had been little studied.

Vertical and horizontal builds were compared at four raster angle pairings. Three filaments were used: a toughened PLA, a flexible medical material, and standard ABS. The toughened PLA matched ABS in strength, while the flexible one bent more but broke at lower impact force. Fracture surfaces showed where voids gathered. The results help set print choices for parts that must take a hit.

Catalog record

CREATORPiotr Dziewit, Kamil Rajkowski, Paweł Płatek, Alexander Yu Churyumov
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE37 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC11728033

Browse the full library · About the Tower of Babel