Design and Evaluation of 3D-Printed Lattice Structures as High Flow Rate Aerosol Filters
Yinkui Yu, Ning Zhang, Dominic Hoffman, Dewansh Rastogi, Ian R. Woodward, Catherine A. Fromen · 2024
Read Design and Evaluation of 3D-Printed Lattice Structures as High Flow Rate Aerosol Filters by Yinkui Yu, Ning Zhang, Dominic Hoffman, Dewansh Rastogi, Ian R. Woodward, Catherine A. Fromen (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-11686461.txt.
Description
Yu and five co-authors built printed foam-like filters in twenty twenty-four to catch tiny bits in fast air flow. Foam filters catch spray bits well but are hard to tune by shape. Their prints use neat cell shapes that can be swapped and sized at will.
They made four cell shapes and checked them with X-ray scans and a spray of one-micron beads. Shapes with more skin per cell caught more bits from the air. One shape was then made at a range of hole shares to test the rule. Catch rates ran from low to near full across speeds, with bits caught by hits and charge.
Catalog record
| CREATOR | Yinkui Yu, Ning Zhang, Dominic Hoffman, Dewansh Rastogi, Ian R. Woodward, Catherine A. Fromen |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 40 KB |
| VERSION | 1.0 |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |