Screen-Printed PVDF Piezoelectric Pressure Transducer for Unsteadiness Study of Oblique Shock Wave Boundary Layer Interaction
Bei Wang, Cosimo Corsi, Thomas Weiland, Zhenyu Wang, Thomas Grund, Olaf Pohl, Johannes Max Bienia, Julien Weiss, Ha Duong Ngo, Ching-Liang Dai, Yao-Chuan Tsai, Zhi-Xuan Dai · 2024
Read Screen-Printed PVDF Piezoelectric Pressure Transducer for Unsteadiness Study of Oblique Shock Wave Boundary Layer Interaction by Bei Wang, Cosimo Corsi, Thomas Weiland, Zhenyu Wang, Thomas Grund, Olaf Pohl, Johannes Max Bienia, Julien Weiss, Ha Duong Ngo, Ching-Liang Dai, Yao-Chuan Tsai, Zhi-Xuan Dai (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-11676075.txt.
Introduction
Bei Wang and co-authors built a flexible pressure sensor for supersonic wind studies in a 2024 paper. Where a shock wave meets the slow air layer on a surface, the flow shakes in ways that tire structures and hurt performance. Standard tools for watching that shaking are costly, intrusive, or slow to respond.
Their sensor is a thin plastic film that turns pressure into electric charge, printed on both sides like a circuit board. It is cheap, light, and bends with the surface. Computer models suggest it can also follow very fast changes, acting like a high-pass filter with little loss up to high frequencies. The team built a custom low-pressure setup to calibrate the low-frequency range the shaking lives in. Early results show stable, sensitive readings. The array offers wind tunnel teams a less intrusive way to map unsteady pressure.
Catalog record
| CREATOR | Bei Wang, Cosimo Corsi, Thomas Weiland, Zhenyu Wang, Thomas Grund, Olaf Pohl, Johannes Max Bienia, Julien Weiss, Ha Duong Ngo, Ching-Liang Dai, Yao-Chuan Tsai, Zhi-Xuan Dai |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 45 KB |
| VERSION | 1.0 |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Screen-Printed PVDF Piezoelectric Pressure Transducer for Unsteadiness Study of Oblique Shock Wave Boundary Layer Interaction Authors: Bei Wang, Cosimo Corsi, Thomas Weiland, Zhenyu Wang, Thomas Grund, Olaf Pohl, Johannes Max Bienia, Julien Weiss, Ha Duong Ngo, Ching-Liang Dai, Yao-Chuan Tsai, Zhi-Xuan Dai Published: 2024 ABSTRACT AbstractShock wave boundary/layer interactions (SWBLIs) are critical in high-speed aerodynamic flows, particularly within supersonic regimes, where unsteady dynamics can induce structural fatigue and degrade vehicle performance. Conventional measurement techniques, such as pressure-sensitive paint (PSP), face limitations in frequency response, calibration complexity, and intrusive instrumentation. Similarly, MEMS-based sensors, like Kulite® sensors, present challenges in terms of intrusiveness, cost, and integration complexity. This study presents a flexible, lightweight polyvinylidene fluoride (PVDF) piezoelectric sensor array designed for high-resolution wall-pressure measurements in SWBLI research. The primary objective is to optimize low-frequency pressure fluctuation detection, addressing SWBLI’s need for accurate, real-time measurements of low-frequency unsteadiness. Fabricated using a double-sided screen-printing technique, this sensor array is low-cost, flexible, and provides stable, high-sensitivity data. Finite Element Method (FEM) simulations indicate that the sensor structure also has potential for high-frequency responses, behaving as a high-pass filter with minimal signal attenuation up to 300 kHz, although the current study’s experimental testing is focused on low-frequency calibration and validation. A custom low-frequency sound pressure setup was used to calibrate the PVDF sensor array, ensuring uniform pressure distribution across sensor elements. Wind tunnel tests at Mach 2 verified the PVDF sensor’s ability to capture pressure fluctuations and unsteady behaviors consistent with those recorded by Kulite sensors. The findings suggest that PVDF sensors are promising alternatives for capturing low-frequency disturbances and intricate flow structures in advanced aerodynamic research, with high-frequency performance to be further explored in future work.Keywords: supersonic, shock wave/boundary layer interaction (SWBLI), PVDF, piezoelectric pressure transduce, FEM simulation, dynamic response in frequency domain, crosstalk effect, wall pressure, unsteadiness 1. Introduction A shock wave/boundary layer interaction (SWBLI) occurs in high-speed aerodynamic flows, particularly in supersonic and hypersonic regimes. This interaction is influenced by factors such as shock wave strength, the angle of incidence on the boundary layer, Reynolds number, and boundary layer characteristics. These factors lead to abrupt changes in flow properties, resulting in shock wave formation and regions with pressure and temperature gradients. Near solid surfaces, a thin boundary layer forms, characterized by gradual changes in flow properties from the surface to freestream conditions [1,2,3]. When the shock wave impinges on the boundary layer, interactions occur, resulting in significant flow modifications, as shown in Figure 1. These modifications can cause the boundary layer to either separate from the surface or undergo substantial thickening or thinning [2,3]. Changes in the boundary layer induce unsteady behaviors, such as low-frequency oscillations, flow separations, turbulence generation, and pressure fluctuations [2,3,4,5]. These unsteady phenomena can lead to vibrations, buffeting, and even structural fatigue in aircraft and other high-speed vehicles [6,7]. Thus, understanding and predicting the unsteadiness caused by shock wave/boundary layer interactions is essential for designing aerodynamically stable and structurally robust systems. Schlieren image of the flow field of the shock wave/boundary layer interaction [3]. For many years, researchers have employed both experimental measurements and computational flow simulations to observe and analyze interactions, visualize flow fields, and obtain qualitative information. Optical methods like schlieren imaging capture refractive index changes due to density gradients but are limited by calibration and small density differences [8]. Particle Image Velocimetry (PIV) visualizes flow fields by tracking tracer particles, although its accuracy is affected by factors such as particle size, lighting, and background noise [9,10,11,12]. Wall-pressure measurements are an essential technique in both ground and flight tests for understanding SWBLIs. These measurements help identify high- and low-pressure regions, such as separation bubbles, validate simulations, and capture the frequency characteristics of unsteadiness [13,14,15,16,17]. Wall-pressure measurements directly assess pressure distribution, offering a more accurate depiction of unsteadiness associated with SWBLIs. However, the use of pressure-sensitive paint (PSP) or Kulite® sensors (Kulite Semiconductor Products, Inc., One Willow Tree Road, Leonia, NJ, USA) is limited by factors like installation, structure, and cost, making them unsuitable for large-area sensing and integration [13,18]. Polyvinylidene Fluoride (PVDF), a thermoplastic fluoropolymer, has been valued for decades due to its flexibility and stretchability, enabling PVDF sensors to adapt to various shapes and surfaces [19,20,21,22,23,24]. These sensors are highly sensitive and structurally simple, making them effective for detecting mechanical stimuli such as pressure, strain, and vibration [25,26,27]. In the study of SWBLIs, low-frequency unsteadiness often dominates critical flow behaviors, including flow separation and recirculation bubble formation, making accurate low-frequency pressure measurements essential. To address this need, this study develops a flexible polyvinylidene fluoride (PVDF) piezoelectric sensor array optimized specifically for low-frequency pressure fluctuation detection in SWBLI environments. Our design and processing methods differ significantly from traditional MEMS sensors and existing approaches [28,29]. The PVDF sensor array, fabricated using a double-sided screen-printing technique, provides a low-cost, lightweight, and flexible solution that can adapt to varying surface shapes while delivering high-sensitivity measurements. Finite Element Method (FEM) simulations indicate that the PVDF sensor array has potential for a stable high-frequency response up to 300 kHz, demonstrating high-pass filter characteristics with minimal signal attenuation at higher frequencies. Although the current experimental testing focuses on low-frequency calibration and validation to meet the primary needs of SWBLI research, the sensor’s design and simulation results provide a foundation for exploring its high-frequency response in future studies. This approach allows us to address immediate research needs in low-frequency unsteadiness while setting a trajectory for expanded applications. In this study, we present the design, fabrication, and performance evaluation of the PVDF sensor array in a supersonic flow environment (Mach 2). The calibration and validation tests were performed to assess the sensor’s low-frequency detection capabilities and benchmark its performance against the widely used Kulite® MEMS sensors. The results highlight the PVDF sensor array’s potential as an effective alternative for unsteady wall-pressure measurements in SWBLI studies, with future work planned to extend testing across a broader frequency range. 2. Methodology: Processing and Characterization 2.1. Material Properties and Design The flexible sensor array was fabricated using screen printing, as shown in Figure 2. A 110 μm-thick PVDF foil (PolyK®) (PolyK Technologies, LLC, 2124 Old Gatesburg Road, State College, PA, USA) served as the piezoelectric sensing material (Table 1). The electrode nodes, each 4 mm in diameter, were printed onto the PVDF foil in a 3 × 6 configuration. Nodes were spaced 6 mm apart within each row and 10 mm apart in each column (Figure 2). Schematic of the design of sensor elements. Table 1Characteristic parameters of PVDF piezoelectric foil [30,31].ItemValueUnitPiezoelectric Strain Constand d33 28 pC/N Piezoelectric Voltage Constant g33 0.3 V·m/N Relative Dielectric Constant εr 13.5 Maximum Operating Voltage>100 V/μm Tensile Strength σMD ~0.4×109 N/m2 Young’s Modulus γMD ~2.8×109 N/m2 Poisson’s Ratio0.3 Density 1.78×103 kg/m3 Frequency Range 10−3 ~ 1010 Hz Pressure Range 0 ~ 109 Pa Operating Temperature Range −40 ~ 80 °C Thickness 110 μm Characteristic parameters of PVDF piezoelectric foil [30,31]. 2.2. FEM Simulation in Frequency Domain The FEM simulation of the PVDF piezoelectric sensor elements was carried out by using COMSOL© Multiphysics 6.2. The model consists of a PVDF piezoelectric film (110 μm) and silver ink electrodes (10 μm) screen-printed in mirrored positions on its top and bottom surfaces. The silver electrodes