Investigation of the Influence of Fused Deposition Modeling 3D Printing Process Parameters on Tensile Properties of Polylactic Acid Parts Using the Taguchi Method

Getu Koro Megersa, Wojciech Sitek, Agnieszka J Nowak, Neven Tomašić, Rubén Paz · 2024

Read Investigation of the Influence of Fused Deposition Modeling 3D Printing Process Parameters on Tensile Properties of Polylactic Acid Parts Using the Taguchi Method by Getu Koro Megersa, Wojciech Sitek, Agnieszka J Nowak, Neven Tomašić, Rubén Paz (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-11643830.txt.

Description

A printed plastic part is only as strong as the settings that made it, and Getu Koro Megersa and co-authors tuned those settings for the commonest printer filament, PLA. Using a Taguchi design, they varied layer thickness, raster angle, build orientation, and nozzle temperature, then pulled the printed bars until they failed and measured stiffness too.

Orientation towered over everything else, explaining about ninety-eight percent of strength differences, with flat-printed parts strongest. Angle and temperature mattered for strength; angle also nudged stiffness. The winning recipe, thin layers, flat orientation, a crossed raster, and a two-hundred-degree nozzle, matched the statistical model's predictions within a few percent. The study hands hobbyists and engineers a ranked checklist: orientation first, the rest after.

Catalog record

CREATORGetu Koro Megersa, Wojciech Sitek, Agnieszka J Nowak, Neven Tomašić, Rubén Paz
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE55 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC11643830

Browse the full library · About the Tower of Babel