Characterization of the Microstructure of Sr0.75Ba0.25Nb2O6 Thin Films by Brillouin Light Scattering

Alexey Pugachev, Andrey Tumarkin, Sergey Adichtchev, Ludmila Ivleva, Alexey Bogdan · 2024

Read Characterization of the Microstructure of Sr0.75Ba0.25Nb2O6 Thin Films by Brillouin Light Scattering by Alexey Pugachev, Andrey Tumarkin, Sergey Adichtchev, Ludmila Ivleva, Alexey Bogdan (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-11643730.txt.

Introduction

Alexey Pugachev and co-authors study, in a 2024 paper, the fine structure of thin films made of strontium-barium niobate. This crystal family is prized for microwave uses because its electrical response bends strongly with voltage while losses stay low. Its disordered inner structure sets those traits, so reading the structure of a film matters.

The films were grown on sapphire by magnetron sputtering. Alongside electron microscopy and X-ray tools, the team used Brillouin light scattering, a method rarely applied to thin films, and made it the focus of the study. Comparing film spectra with those of bulk crystals let them pin down film thickness with high accuracy and spot features tied to trapped sound waves. The authors call the method an excellent damage-free probe for such films.

Catalog record

CREATORAlexey Pugachev, Andrey Tumarkin, Sergey Adichtchev, Ludmila Ivleva, Alexey Bogdan
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE40 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC11643730

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Characterization of the Microstructure of Sr0.75Ba0.25Nb2O6 Thin Films by Brillouin Light Scattering Authors: Alexey Pugachev, Andrey Tumarkin, Sergey Adichtchev, Ludmila Ivleva, Alexey Bogdan Published: 2024 ABSTRACT Strontium-barium niobate (SrxBa(1−x)Nb2O6) films can be considered as a promising material for microwave applications due to high dielectric nonlinearity and relatively low losses. Since strontium-barium niobate has a disordered structure that determines its unique electrical properties, the identification of structural features of the SrxBa(1−x)Nb2O6 films is the key to their successful use. The SrxBa(1−x)Nb2O6 films were synthesized on a sapphire substrate by magnetron sputtering. The structure of the films was studied by both traditional methods of electron microscopy, X-ray diffraction, and the rarely used for thin films investigation Brillouin light scattering method, which was the focus of our study. We show that Brillouin light scattering is an excellent nondestructive method for studying the structural features of thin ferroelectric strontium-barium niobate films. An analysis of the features of the Brillouin light scattering spectra in thin-film structures and their comparison with the spectra of bulk crystals allowed us to determine with high accuracy the thickness of the films under study and their structural features determined by the resonant scattering of acoustic waves. 1. Introduction Ferroelectrics (FE) exhibit a strong dependence of permittivity on the external electric field with relatively low losses, which makes them promising materials for use in microwave electronics. The dielectric nonlinearity of ferroelectrics allows them to be used as the basis for electrically tunable capacitors, filters, and phase shifters, which are key elements of microwave devices. The most promising option for implementing such elements is a thin-film structure consisting of a dielectric substrate, a ferroelectric film in which large control fields are easily implemented, and electrodes of a certain configuration. An important advantage of such a structure is its ease of implementation and low cost. Today, the most studied material for use in microwave devices is barium-strontium titanate BaSrTiO3 (BST) in the paraelectric state [1,2,3,4,5]. Compared with ferrite materials traditionally used for tunable microwave devices, BST demonstrates a higher response speed [2], and compared with semiconductor materials, a higher level of operating power for a microwave signal [6,7]. Operation at high power levels compared with semiconductor devices is determined by the possibility of creating distributed film structures with a large heat sink area. The material demonstrates microwave electrodynamic properties that are promising for phase-shifting devices and tunable deflectors with operating frequencies up to 40 GHz [8,9]. Nevertheless, the relatively large relaxation times of permittivity and the dielectric loss levels of BST films stimulate the search for alternative ferroelectric solid solutions for microwave applications [10]. Strontium-barium niobate SrxBa(1−x)Nb2O6 (SBN) seems to be such an alternative to barium-strontium titanate. At x ≥ 0.6, the material belongs to the class of relaxor ferroelectrics, has a disordered structure, and due to this, exhibits a number of unique physical characteristics. Large values of nonlinear optical coefficients and relatively low coercive fields, of the order of 1 kV/cm, characteristic of SBN, make it possible to create elements with regular domain structures on its basis for the creation of efficient frequency converters of laser radiation [11]. In recent years, much attention has been paid to experimental and theoretical studies of the properties of heterostructures based on SBN thin films. These films are of interest for microwave applications for the following reasons:(a)unlike conventional homogeneous ferroelectrics, the values of dielectric, piezo-, pyroelectric, electrical and nonlinear-optical characteristics in SBN crystals are extremely high, due to which the material has pronounced nonlinearity of dielectric properties and their dependence on external influences [12];(b)the phase transition and anomalies of the properties of relaxor SBN are significantly blurred over a wide temperature range, which makes strontium-barium niobate a promising thermally stabilized ferroelectric material for microwave applications [13,14];(c)SBN solid solutions demonstrate a decrease in the values of dielectric relaxation and leakage currents with an increase in the content of strontium atoms, which can have a positive effect on the level of microwave losses of the FE device [15];(d)the material has high electrical strength, which opens up the possibility of increasing the applied electric field to the tunable element and increasing the dielectric nonlinearity of the microwave device;(e)the introduction of impurity ions into the real structure of the SBN crystal leads to a significant change in the dynamics of phase transformations, the appearance of new physical properties, and expands the areas of application of such crystals [16,17]. (a)unlike conventional homogeneous ferroelectrics, the values of dielectric, piezo-, pyroelectric, electrical and nonlinear-optical characteristics in SBN crystals are extremely high, due to which the material has pronounced nonlinearity of dielectric properties and their dependence on external influences [12]; unlike conventional homogeneous ferroelectrics, the values of dielectric, piezo-, pyroelectric, electrical and nonlinear-optical characteristics in SBN crystals are extremely high, due to which the material has pronounced nonlinearity of dielectric properties and their dependence on external influences [12]; (b)the phase transition and anomalies of the properties of relaxor SBN are significantly blurred over a wide temperature range, which makes strontium-barium niobate a promising thermally stabilized ferroelectric material for microwave applications [13,14]; the phase transition and anomalies of the properties of relaxor SBN are significantly blurred over a wide temperature range, which makes strontium-barium niobate a promising thermally stabilized ferroelectric material for microwave applications [13,14]; (c)SBN solid solutions demonstrate a decrease in the values of dielectric relaxation and leakage currents with an increase in the content of strontium atoms, which can have a positive effect on the level of microwave losses of the FE device [15]; SBN solid solutions demonstrate a decrease in the values of dielectric relaxation and leakage currents with an increase in the content of strontium atoms, which can have a positive effect on the level of microwave losses of the FE device [15]; (d)the material has high electrical strength, which opens up the possibility of increasing the applied electric field to the tunable element and increasing the dielectric nonlinearity of the microwave device; the material has high electrical strength, which opens up the possibility of increasing the applied electric field to the tunable element and increasing the dielectric nonlinearity of the microwave device; (e)the introduction of impurity ions into the real structure of the SBN crystal leads to a significant change in the dynamics of phase transformations, the appearance of new physical properties, and expands the areas of application of such crystals [16,17]. the introduction of impurity ions into the real structure of the SBN crystal leads to a significant change in the dynamics of phase transformations, the appearance of new physical properties, and expands the areas of application of such crystals [16,17]. Compared with numerous studies of strontium-barium niobate for applications as electro-optical devices, holographic storage devices and the basis of non-volatile random-access memory, information on the microwave dielectric properties of SBN films is fragmentary. Single works on this topic report on the production of oriented thin SBN films on single-crystal substrates by pulsed laser deposition and gas-discharge RF sputtering. All works use a traditional technological approach, i.e., solve the problem of oriented growth of SBN film on structurally matched substrates (MgO and LaAlO3), which are not the optimal choice for microwave applications. Expectedly, such a choice of materials does not lead to the production of structures exhibiting promising microwave

Read the complete text