Mechanical and Physical Characterization of a Biphasic 3D Printed Silk-Infilled Scaffold for Osteochondral Tissue Engineering
T Braxton, K Lim, C Alcala-Orozco, H Joukhdar, J Rnjak-Kovacina, N Iqbal, T Woodfield, D Wood, C Brockett, XB Yang · 2024
Read Mechanical and Physical Characterization of a Biphasic 3D Printed Silk-Infilled Scaffold for Osteochondral Tissue Engineering by T Braxton, K Lim, C Alcala-Orozco, H Joukhdar, J Rnjak-Kovacina, N Iqbal, T Woodfield, D Wood, C Brockett, XB Yang (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-11632666.txt.
Description
Braxton and co-authors build and test a two-layer scaffold for repairing joint surfaces. Their 2024 study prints a plastic lattice and fills it with porous silk, mimicking bone below and cartilage above. Even small cartilage damage raises arthritis risk sharply, so early repair matters.
Plain lattices leave pores too wide for cells to bridge. The silk fill closes that gap while the frame bears load. Pressing tests showed strength and spring in the joint-safe range, with good wear over repeats. Human stem cells from marrow attached and spread on the scaffold. The authors see a path to implants that regrow the joint surface.
Catalog record
| CREATOR | T Braxton, K Lim, C Alcala-Orozco, H Joukhdar, J Rnjak-Kovacina, N Iqbal, T Woodfield, D Wood, C Brockett, XB Yang |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 54 KB |
| VERSION | 1.0 |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |