Microbubble-based fabrication of resilient porous ionogels for high-sensitivity pressure sensors

Ziwei Yang, Jingxiao Wang, Xiao Wan, Hongcheng Xu, Chuanyu Zhang, Xiaoke Lu, Weixuan Jing, Chuanfei Guo, Xueyong Wei · 2024

Read Microbubble-based fabrication of resilient porous ionogels for high-sensitivity pressure sensors by Ziwei Yang, Jingxiao Wang, Xiao Wan, Hongcheng Xu, Chuanyu Zhang, Xiaoke Lu, Weixuan Jing, Chuanfei Guo, Xueyong Wei (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-11589707.txt.

Description

Ziwei Yang and co-authors foam ionogels with microbubbles for pressure sensing in a 2024 paper. Sensitive flexible sensors serve electronic skin and health wearables. Ionic microstructures boost sensitivity and detection limits. Making porous ionic elastomers fast and tunably was the bottleneck.

Sliding motion drags air into the viscous ionic fluid. The airflow breaks into microbubbles inside it. Ultraviolet light then freezes the foam in place. Porosity reaches ninety-five percent in the product. The gel stays superelastic with a very low stiffness. Sandwiched between electrodes, it senses pressure ionically. Sensitivity is high across an unusually broad range. Fine pressure resolution holds even at high load. Fingertip pulses and foot strikes were both captured. Grasping force registered in the demonstrations too. Wearable diagnostics gain a fabrication shortcut.

Catalog record

CREATORZiwei Yang, Jingxiao Wang, Xiao Wan, Hongcheng Xu, Chuanyu Zhang, Xiaoke Lu, Weixuan Jing, Chuanfei Guo, Xueyong Wei
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE25 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC11589707

Browse the full library · About the Tower of Babel