Additive Manufactured Parts Produced Using Selective Laser Sintering Technology: Comparison between Porosity of Pure and Blended Polymers

Chiara Morano, Leonardo Pagnotta, Anton Ficai, Cristina-Elisabeta Pelin · 2023

Read Additive Manufactured Parts Produced Using Selective Laser Sintering Technology: Comparison between Porosity of Pure and Blended Polymers by Chiara Morano, Leonardo Pagnotta, Anton Ficai, Cristina-Elisabeta Pelin (2023) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/pmc-10675180.txt.

Description

Parts printed by selective laser sintering often contain pores, a weak point of the method, yet no one had lined up the published porosity numbers side by side. Morano and co-authors gather results from many studies on pure and blended polymers, both amorphous and semi-crystalline types. For each material they tabulate the printing settings alongside the measured porosity.

The review gives builders a direct comparison of how much void space each material and setting tends to leave. The authors argue such a table can guide material choice and process tuning. They present the work as a reference for advancing printed polymer quality across labs.

Catalog record

CREATORChiara Morano, Leonardo Pagnotta, Anton Ficai, Cristina-Elisabeta Pelin
YEAR2023
COLLECTIONPAPERS
FORMATTXT
FILE SIZE61 KB
VERSION1.0
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC10675180

Browse the full library · About the Tower of Babel