Comparative study of the rotating bending fatigue performance of wire arc additively manufactured hollow shafts with and without TIG pre-joining

Van-Minh Nguyen, Pham Son Minh, Tran Minh The Uyen, Hai Hung Pham · 2026

Read Comparative study of the rotating bending fatigue performance of wire arc additively manufactured hollow shafts with and without TIG pre-joining by Van-Minh Nguyen, Pham Son Minh, Tran Minh The Uyen, Hai Hung Pham (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/plos-pone-0357916.txt.

Description

Van-Minh Nguyen and three colleagues ask whether a preliminary weld can save additively manufactured shafts from early fatigue death, in PLOS ONE in 2026. Their hollow shafts are built by wire arc printing steel onto stacked rings. The print alone left a hairline unfused seam at each ring joint. Cyclic bending would find that seam. A designed experiment varied current, bead overlap, speed, and ring thickness over thirty runs to optimize the joined version.

The optimized pre joined shafts lasted about half again as long in rotating bending tests as print only shafts, roughly four hundred ninety thousand cycles against three hundred twenty-seven thousand. Scatter between specimens also narrowed. Microscopy explained the gain: the pre weld fused the ring wall completely, while the print only seam gaped slightly at the bore. The authors flag the small sample size, but the mechanism and the margin point the same way.

Catalog record

CREATORVan-Minh Nguyen, Pham Son Minh, Tran Minh The Uyen, Hai Hung Pham
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE89921
LICENSECC_BY
RIGHTSCC BY
SOURCEPLOS

Source: https://doi.org/10.1371/journal.pone.0357916

Browse the full library · About the Tower of Babel