Optimization of injection molding parameters for bending and tensile strength of ABS and ABS/carbon fiber composites using Taguchi–Grey correlation analysis

Hieu Giang Le, Thanh Trung Do, Tran Minh The Uyen, Bui Chan Thanh, Pham Son Minh · 2026

Read Optimization of injection molding parameters for bending and tensile strength of ABS and ABS/carbon fiber composites using Taguchi–Grey correlation analysis by Hieu Giang Le, Thanh Trung Do, Tran Minh The Uyen, Bui Chan Thanh, Pham Son Minh (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/plos-pone-0352647.txt.

Description

Hieu Giang Le and four colleagues tune the settings of an injection-moulding machine to make plastic parts stronger, in this 2026 PLOS ONE engineering study. Their materials were a common moulding plastic, plain and reinforced with woven carbon fibre, made by a two-step process that moulds around the fabric. Five settings — two pressures, two timings, and melt temperature — were varied systematically across a designed set of runs.

Adding carbon fibre raised bending strength modestly and pulling strength by roughly a sixth. Filling pressure dominated all others in influence. A combined statistical method picked the best setting recipe, and confirmation runs landed within a few percent of predictions. Small setting changes, it turns out, are free strength.

Catalog record

CREATORHieu Giang Le, Thanh Trung Do, Tran Minh The Uyen, Bui Chan Thanh, Pham Son Minh
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE65512
LICENSECC_BY
RIGHTSCC BY
SOURCEPLOS

Source: https://doi.org/10.1371/journal.pone.0352647

Browse the full library · About the Tower of Babel