Densification of composite cathodes in all-solid-state Li-ion batteries via sheet metal hydroforming pressing

Kazushi Hayashi, Takuya Mori, 知宏 大園, Mario Becker, Sebastian Alm · 2026

Read Densification of composite cathodes in all-solid-state Li-ion batteries via sheet metal hydroforming pressing by Kazushi Hayashi, Takuya Mori, 知宏 大園, Mario Becker, Sebastian Alm (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/openalex-w7214987004.txt.

Description

Kazushi Hayashi led a Japanese and Swedish engineering team in a 2026 technical report on pressing composite cathodes for all-solid-state lithium-ion batteries. These batteries promise higher power, longer range, and better safety for electric vehicles, but their solid electrodes must be densely packed to work well. The team adapted sheet metal hydroforming, pressing through a rubber diaphragm with preheating and no fluid, suited to factories that must control moisture strictly.

Using synchrotron X-ray imaging, they compared structures before and after pressing against conventional methods. At room temperature their method cut the void share in the cathode by about half, matching cold isostatic pressing, while uniaxial pressing removed large voids but densified less. Heat helped greatly, reducing voids several-fold further. The fluid-free design, the authors note, fits battery production lines with severe dew point demands.

Catalog record

CREATORKazushi Hayashi, Takuya Mori, 知宏 大園, Mario Becker, Sebastian Alm
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE22 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEOpenAlex / Journal of the Ceramic Society of Japan

Source: https://doi.org/10.2109/jcersj2.26051

Browse the full library · About the Tower of Babel