Solubility and Permeation of Hydrogen Sulfide in Lipid Membranes
Ernesto Cuevasanta, Ana Denicola, Beatriz Alvarez, Matı́as N. Möller · 2012
Read Solubility and Permeation of Hydrogen Sulfide in Lipid Membranes by Ernesto Cuevasanta, Ana Denicola, Beatriz Alvarez, Matı́as N. Möller (2012) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/openalex-w2057889321.txt.
Introduction
Ernesto Cuevasanta, Ana Denicola, Beatriz Alvarez and Matias Moller measured how hydrogen sulfide moves through fat membranes. Their paper appeared in PLoS ONE in 2012. The gas is known as a poison. The body also makes small amounts of it. Those small amounts help regulate body functions.
The team measured how the gas splits between water and membranes. They used lab-made membrane bubbles and simple solvents. The gas gathered about twice as strongly in membranes. That made membrane crossing very fast. A computer model then tracked spread in tissue. Sulfide from one cell could reach hundreds of neighbours. Membranes still slowed its overall travel notably. The work clarifies how the gas acts in the body.
Catalog record
| CREATOR | Ernesto Cuevasanta, Ana Denicola, Beatriz Alvarez, Matı́as N. Möller |
|---|---|
| YEAR | 2012 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | OpenAlex |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Solubility and Permeation of Hydrogen Sulfide in Lipid Membranes Ernesto Cuevasanta1,2, Ana Denicola2,3, Beatriz Alvarez1,2*, Matı́as N. Möller2,3* 1 Laboratorio de Enzimologı́a, Facultad de Ciencias, Universidad de la República, Montevideo, Uruguay, 2 Center for Free Radical and Biomedical Research, Universidad de la República, Montevideo, Uruguay, 3 Laboratorio de Fisicoquı́mica Biológica, Facultad de Ciencias, Universidad de la República, Montevideo, Uruguay Abstract Hydrogen sulfide (H2S) is mainly known for its toxicity but has recently been shown to be produced endogenously in mammalian tissues and to be associated with physiological regulatory functions. To better understand the role of biomembranes in modulating its biological distribution and effects; we measured the partition coefficient of H2S in models of biological membranes. The partition coefficients were found to be 2.160.2, 1.960.5 and 2.060.6 in n-octanol, hexane and dilauroylphosphatidylcholine liposome membranes relative to water, respectively (25uC). This two-fold higher concentration of H2S in the membrane translates into a rapid membrane permeability, Pm = 3 cm s21. We used a mathematical model in three dimensions to gain insight into the diffusion of total sulfide in tissues. This model shows that the sphere of action of sulfide produced by a single cell expands to involve more than 200 neighboring cells, and that the resistance imposed by lipid membranes has a significant effect on the diffusional spread of sulfide at pH 7.4, increasing local concentrations. These results support the role of hydrogen sulfide as a paracrine signaling molecule and reveal advantageous pharmacokinetic properties for its therapeutic applications. Citation: Cuevasanta E, Denicola A, Alvarez B, Möller MN (2012) Solubility and Permeation of Hydrogen Sulfide in Lipid Membranes. PLoS ONE 7(4): e34562. doi:10.1371/journal.pone.0034562 Editor: Krisztian Stadler, Pennington Biomedical Research Center, United States of America Received October 19, 2011; Accepted March 5, 2012; Published April 11, 2012 Copyright: ß 2012 Cuevasanta et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Funding: This work was supported by grants from CSIC (Universidad de la República, Uruguay, to Dr. Alvarez and Dr. Denicola). Dr. Cuevasanta was supported by a fellowship from ANII (BE_INI_2008_55, Uruguay). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Competing Interests: The authors have declared that no competing interests exist. * E-mail: [email protected] (MNM); [email protected] (BA) which yields oxidizing and nitrosating species, occurs thirty times more rapidly inside lipid membranes than in aqueous media [9,10,11]. Considering that the permeability coefficient of a membrane to a solute (Pm) is directly proportional to the partition coefficient (KP) [12], another consequence of a high solubility of H2S in lipid membranes would be a high membrane permeability. Mathai et al. have recently measured the permeability coefficient using planar lipid bilayers and found that diffusion through the membrane was fast indeed (Pm = 0.560.4 cm s21, [13]). As discussed by these authors, this value may actually be an underestimation, which prompted us to find a better estimate. Diffusion of H2S through membranes and aqueous solution is very important because it will determine the extent of H2S action. If H2S could diffuse practically unhindered through lipid membranes, it could act at places distant from the site of formation supporting mechanisms of transient paracrine communication. Understanding the interactions of H2S with lipid membranes and its overall diffusion is essential to rationalize the biological properties and the pharmacological potential of this newly recognized signaling molecule. Herein, we determined the partition coefficient of H2S in the organic solvents hexane and n-octanol, relative to water. We also developed a method and successfully measured the partition coefficient of H2S in dilauroylphosphatidylcholine liposome membranes. This solubility value allowed us to estimate the permeability coefficient of phospholipid membranes to H2S. Finally, we modeled the diffusional spread of H2S from a single cell, illustrating how far and how many neighboring cells could H2S affect, and analyzed Introduction For years, the toxicity of hydrogen sulfide (H2S, IUPAC recommended name dihydrogen sulfide) has been recognized and explored [1], but only recently it has been associated with an intrinsic physiological role in mammals. The discovery of endogenous H2S-producing enzymatic pathways and the measurement of significant H2S levels in several tissues was followed by the implication of H2S in numerous biochemical functions, and latest investigations propose that H2S could play signaling and cytoprotective roles, revealing its potential for pharmacological applications [2]. Hydrogen sulfide is a secondary product of the transsulfuration pathway. It is produced by two pyridoxal-phosphate-dependent enzymes, cystathionine b-synthase (CBS) [3] and cystathionine clyase (CGL) [4], and by the detoxifying enzyme mercaptopyruvate sulfurtransferase [5]. The physiological targets vary according to the tissue, for example, in brain and nervous system, H2S can modulate NMDA receptors [2], whereas in the vasculature H2S mediates vasorelaxation by opening KATP channels [6]. It could also act as an oxidant scavenger, but the recent determination of the relatively low rate constants [7] together with the fairly low physiological levels [8], suggest that this action would depend on H2S being able to achieve high local concentrations. If H2S were a hydrophobic molecule, then a higher local concentration of H2S could be achieved in the hydrophobic core of lipid membranes, and promote reactions with physiological targets. For instance, the reaction of nitric oxide with oxygen, PLoS ONE | www.plosone.org 1 April 2012 | Volume 7 | Issue 4 | e34562 H2S Solubility and Permeation in Lipid Membranes the impact of lipid membranes on the macroscopic diffusion of H2S. 1 Kpmem=w ~ a Materials and Methods Hydrogen sulfide solutions ½H2 Slip g ! {1 z1 ð1Þ lip where ½H2 Slip aq and ½H2 Sg are aqueous and gas concentrations in the samples with liposomes, Kg is a partition-like expression of Henry’s constant ([H2S]g/[H2S]aq), which can be calculated from the results obtained with buffer-only samples, and a is the lipid fractional volume, calculated taking into account lipid concentration and lipid specific volume (0.97 ml/g, see Text S1). Typical experimental concentration values are shown in Table S1. Measured Kg values, 0.460.1, were similar to previous reports [17]. Stock solutions contained sodium hydrosulfide (NaHS, SigmaAldrich) in water and their concentration was determined by iodometric titration [7]. The working solutions contained a mix of H2S and HS2 (hydrosulfide anion) in dependence with pH (pKa1 = 7.0 and pKa2 ,17 [14]). At pH 7.4 total sulfide distributes 72% as HS2, 28% as H2S and S22 (sulfide) is insignificant. At pH 3.8 HS2 becomes negligible (0.06%) and solutions can be considered 100% H2S. Determination of partition coefficients in hexane and noctanol Modeling the 3D diffusional spread of H2S from a single cell Partition coefficients (KP) were calculated as the ratio of organic solvent/buffer total sulfide concentration. Hexane and n-octanol were pre-equilibrated with sodium formate buffer (0.1 M, pH 3.8) overnight. Sealed tubes were prepared with a mix of buffer, sodium hydrosulfide (10 mM) and solvent with minimal headspace. Tubes were allowed to reach thermodynamical equilibrium (gentle agitation during 1 h at 25uC) and were centrifuged (10 min, 200 g) to separate the phases. Then, aliquots from both phases were removed with a gas-tight syringe and H2S was measured by an adaptation of the methylene blue assay [7,15]. Samples