Internal thrust and pumping performance of an auxiliary inlet ejector nozzle with clamshell thrust reverser
1969
Read Internal thrust and pumping performance of an auxiliary inlet ejector nozzle with clamshell thrust reverser (1969) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/nasa-tm-19690025535-internal-thrust-and-pumping-performance.txt.
Introduction
Ali H. Mansour and Richard R. Burley of Lewis Research Center wrote this June 1969 preliminary memorandum, TM X-52621. They measured the internal thrust and pumping performance of an auxiliary inlet ejector nozzle fitted with a clamshell thrust reverser. Ejector nozzles blend extra air into the exhaust to shape thrust across a jet's whole speed range.
Three hardware configurations simulated takeoff, transonic acceleration, and supersonic cruise flight. The clamshell reverser sat fixed at positions matching its working settings in flight. Adding a third air stream improved performance at low pressure ratios, the authors report. Peak thrust efficiency reached about ninety-nine percent at takeoff. It reached slightly higher still in the supersonic cruise configuration.
Catalog record
| YEAR | 1969 |
|---|---|
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 85 KB |
| LICENSE | Public Domain |
| RIGHTS | PUBLIC DOMAIN |
| SOURCE | NASA NTRS |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Internal thrust and pumping performance of an auxiliary inlet ejector nozzle with clamshell thrust reverser NASA Technical Memorandum - - - w--- r t lI NASA TECHNICAL NASA TM X-52621 MEMORANDUM r-I N -.0 N Ll"\ I >< :E I- < ~ <C c E z y INTERNAL THRUST AND PUMPING PERFORMANCE OF AN AUXILIARY INLET EJECTOR NOZZLE WITH CLAMSHELL THRUST REVERSER by Ali H. Mansour and Richard R. Burley Lewis Research Center Cleveland, Ohio June 1969 .- - ---- This information is being published in prelimi- nary form in order to expedite its early release. NASA TM X- 52621 INTERNAL THRUST AND PUMPING PERFORMANCE OF AN AUXILIARY INLET EJECTOR NOZZLE WITH CLAMSHELL THRUST REVERSER by Ali H . Mansour and Richard R . Burley Lewis Research Center Cleveland, Ohio NATIONAL AERONAUTICS AND SPACE ADMINISTRATION Page Intentionally Left Blank ABSTRACT Data were obtained over a range of pressure ra ti o from 2 to 31 and corrected secondary weight-flow ratio from ' 2 to ~Io for thr ee configurations which simulated take-off, transonic acceleration, and supersonic cruise flight conditions. A clpmshe ll thrust reverser was fixed in positions approximately corresponding to those in fl i gh t operation . Adding tertiary air to the ejector i~prove d per f ormance at low pressure ratios. A maximum thrust coefficie nt o f about 99% was obtained at take-off , and about 99.5% at superson ic cru ise . ., ~ , .. r-' I •• .f ~ . , ~l, 1.1 .... ' I :. ,. Page Intentionally Left Blank , I, I ~ ". " ~ .... ;.: ' ! iHERNAL THRUST AND PUMP I NG PERFORMANCE OF AN AUXILIARY INLET EJECTOR NOZZLE ~/ITH CLAMSHELL THRUST REVERSER , , , By Ali H. Ma~sour and ~fch8rd R. Bur l ~Y , , ;,' - , ,- ~ f\ ~; .... , ; .I. '~:, r p CONTENTS , t • t' I • ..f " , , pa ge-,' SUrmlary ~ , .. -: Introd uc t ion -, ',' -1.', " .' ' Appar atus and Procedure , ,- .. - '"? I Insta llatio n Primary Nozzle Auxil iary Inlet Eject or Nozzle , Instru menta tion ~, '( .. ~ ••• I ~ Proce dure ..... ", ,: -."'" " '. '" Resul ts and Discu ssion Pumping and Thrus t Chara cteris tics Eject or and Clamshell Profi les Summary of Resul ts Appendix A (Symbols) Refer ences Page Intentionally Left Blank SUMMARY An investigation was conducted to determ ine pumping and inter na l -th r ust performance of an auxiliary inlet ejector nozz le (A~ E ) , wi th c la ms he ll thrust reverser, over a range of corrected seconda r y f low r at io f r om about 0.02 to about O.OB. A turbojet (JB5-GE-13) was used as a gas gene r a t o r to provide nozzle inlet flow. The eng i ne primary nozzle a r ea was va r ied to give a range of ejector area ratios between 2. 25 a nd 4.507 . The nozz l e inlet gas temperature was varied from about 16400 R (9000 K) t o ~ bout 3200P R (1777°K). Three configurations were tested which si mu ~ a t ed t a ke -off ffl aps closed; open fixed doors}, transonic acceleration (f la ps closed o doo rs closed), and supersonic cruise (flaps open ; doo r s closed } fl i ght cond i tions. Pumping performance for the take-off ejec tor (doors open ) wa s adequate and no apparent limit was reached. A th r ust coe f f icient of a bout 99 pe r cent was obtained with th is conf i guration at low nozz le pr essu r e r a ti os (between two and three) wi th about 0.05 corr ect ed secondary f low ra tio . The 20P door seems to have a slightly (less than one per c en t) be t te r th r ust coe ffici ent than the 80 -16 0 , 160 , 100 -200 doors. Pumping was limited due to a choking condit ion in the t r ansoni c ejector {doors closed}. An improvement in thrust coef fi c ient was obta i ned wit h t hi s configuration as secondary flow was increased. A thr ust coe f f ic ient app r oach- ing 97 percent was obtained at a nozzle pr essu r e rat io of a bou t 6.;. Adding tertiary air through the open doo r s t o he ejector impr oved thrust coefficient at low pressure ratios. Pumping was lim it ed due to a chok i ng cond i t ion i n t he s upe rs on i c c r u i se ej ector (flaps open ; doo r s c losed). A t hru st coe f fi ci ent o f a bout 99.5 percent was obtained at a nozzle pressure rat io of abou t 24 for t he i ghest area ratio (4.507) tested with a corr ected secondary f low ratio of about 0.06. A corrected secondary f l ow ratio of as low as 0 .02 wa s s lilff i ci en t f or cooling the shroud and the clamshell f or a maximum prima r y ga s t empe ra ture of about 32000 R (1777°K). INTROD UCT ION A flight test program has been initiated at l ewis Res earc r en t e r to evaluate ai r frame installation effects on a var i et y of exhaus t nozzle concepts. Prior to flight test i ng, it is necessary to dete r mi ne th e internal perforwmnce of these nozzles. This report presents the pumping and i nte r n~l t hr ust per- formance of an auxiliary inlet ejector nozzle with a clamshe ll t hru st reve rs e r which was investigated in a Propulsion Systems laborator y a lti t ude chamber a t the Lewis Research Center. The nozzle system inc l uded an ejector sh rou d wi t h a f i xe d contou r simulating flaps at the shroud exit (trailing-edge flaps) ~nd a ser ies o f a x il iary inlet doors located around the periphery of the exter nal skin jus t a hea d of th e primary nozzle exit. The basic operation of this type of nozzle system is described in reference I. For this investigation, the auxiliary inlet doors and simulated trailing-edge flaps were fixed in pos i tions corresponding to operations at take-off (flaps closed; fixed open doors), transonic operation (flaps closed; doors closed), and supersonic cruise operation (flaps open; doors closed). The clamshell was fixed in positions approximately corresponding to those in flight operations. A 17 degree position was set for take-off and a zero degree posit ion was set for the transonic acceleration and supersonic cruise operations. (A simu lated clamshell surface was provided for the supersonic cruise operation).