Microelectronic Data and Control Transmission System for Dynamic Wind-tunnel Testing

Unknown · 2013

Read Microelectronic Data and Control Transmission System for Dynamic Wind-tunnel Testing by Unknown (2013) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/nasa-tm-19680024853-microelectronic-data-and-control-transmi.txt.

Introduction

James H. Schrader and C. D. Nichols of Langley Research Center describe a microelectronic data system for wind tunnel testing in this June 1968 paper. Dynamic tests run long series of conditions with no practical access to the model. Engineers still need data out and control signals in throughout each run.

Their system sends up to twenty high-response data signals from the model. It also carries up to fifty-four auxiliary control functions back to the model. All traffic shares a single cable about one-sixteenth of an inch thick. Remote control covers the model's electromechanical transducers and full data system setup. The design suits dynamic transonic tunnel work, per the report record.

Catalog record

CREATORUnknown
YEAR2013
COLLECTIONPAPERS
FORMATTXT
FILE SIZE17 KB
LICENSEPublic Domain
RIGHTSPUBLIC DOMAIN
SOURCENASA NTRS

Source: https://ntrs.nasa.gov/citations/19680024853

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Microelectronic Data and Control Transmission System for Dynamic Wind-tunnel Testing NASA Technical Memorandum MICR0ES;ECTRONIC DATA AND CONTROL TRANSMTSSION SYSTEM FOR DYNAMIC WIND-TUNKEL 'TESTING by James H. Schrader and C. D. Uichols NASA Langley Research Center Langley Station, Hampton, Va. Presented at the 14th National Aerospace Symposium Boston, Mass. June 3-3, 1968 NASA - Langley MICROEUCTRONIC DATA AND CONTROL TRANSMISSION SYSTEM FOR DYNAMIC WIND-TUNNEL TESTING By James H. Schrader and C. D. Nichols Paper Presented a t 1 4 t h National Aerospace Symposium June 3-5, 1968 Boston, Mass. SUMMARY This paper d e s c r i b e s a microelectronic d a t a and c o n t r o l transmission system designed f o r use i n a wind t u n n e l where a c c e s s t o t h e t e s t model i s not p r a c t i c a l during a r e l a t i v e l y long p e r i o d of t i m e covering a series of L- 6234 - 2 - about a l l t h r e e axes. as w e l l as i n t h e v e r t i c a l and l a t e r a l d i r e c t i o n s . A t u r b u l e n t airstream i s created by o s c i l l a t i n g vanes upstream of the model and a f r e o n atmosphere i s employed t o o b t a i n t h e proper s c a l i n g . All of t h e d a t a obtained i n the model and c o n t r o l s i g n a l s required t o t r i m or " f l y " t h e model must be t r a n s m i t t e d between t h e c o n t r o l room and t h e model v i a a n u m b i l i c a l cable. A wire t e l e m e t r y system was developed f o r t h i s which u t i l i z e s a 1/16-inch-diameter c o a x i a l transmission cable. The performance requirements for t h i s system are summarized i n f i g u r e 2. F i r s t , t h i s system had t o be capable of the simultaneous transmission and recording of up t o 20, r e l a t i v e l y high response (200 Hz), d a t a s i g n a l s from t h e model t o t h e c o n t r o l room over phase matched channels. Second, due t o t h e extreme v a r i a t i o n of t e s t conditions and t h e use of a f r e o n atmosphere, t h e s e n s i t i v i t y and zero o f f s e t of each channel had t o be v a r i a b l e remotely from t h e c o n t r o l room. d 1 Third, since t h e model i s e s s e n t i a l l y flown i n t h e t u n n e l by a p i l o t l o c a t e d - i n t h e c o n t r o l room, a remote c o n t r o l c a p a b i l i t y had t o be provided f o r a c t u a t i o n of e l e c t r i c a l motors w i t h i n t h e model. F i n a l l y , t h e o v e r a l l system must be p h y s i c a l l y s u i t e d f o r i n s t a l l a t i o n i n t h e r e l a t i v e l y small models used. The g u i d e l i n e s were t h a t a f u l l i n s t a l l a t i o n should occupy no more than 200 cubic inches and weigh no more than 10 pounds w i t h reduced i n s t a l l a t i o n s being correspondingly smaller. To accomplish t h i s performance, a system was designed which employs frequency multiplex transmission of d a t a from t h e model t o t h e c o n t r o l room and t i m e multiplex transmission of c o n t r o l s from t h e c o n t r o l room t o t h e model. This approach s a t i s f i e d t h e requirements f o r a moderate number of r e l a t i v e l y h i g h response matched d a t a channels and a l a r g e number of - 3 - r e l a t i v e l y low response c o n t r o l channels. The system w a s designed i n a modular form w i t h s i x b i n a r y c o n t r o l channels p e r module and f i v e data channels p e r module. DESCRIFTION ( a ) General The o v e r a l l system design i s shown i n t h e block diagram i n f i g u r e 3 . The analog s i g n a l s obtained from t r a n s d u c e r s i n t h e model are applied d i r e c t l y o r through an i n p u t s e l e c t o r u n i t t o t h e five-channel modulator u n i t . This u n i t generates a frequency modulated c a r r i e r for each i n p u t , which i

Read the complete text