Fabrication and Applications of Microfluidic Devices: A Review.
Niculescu AG, Chircov C, Bîrcă AC, Grumezescu AM. · 2021
Read Fabrication and Applications of Microfluidic Devices: A Review. by Niculescu AG, Chircov C, Bîrcă AC, Grumezescu AM. (2021) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc7921936.txt.
Introduction
Niculescu and co-authors present a review of microfluidic devices, covering how they are made and where they are used. Microfluidics handles tiny flows of liquid inside chips with channels at the microscale. The field blends physics, chemistry, biology, and materials science. Such chips can run lab steps in miniature, at low cost and volume.
The review surveys the materials used to build these platforms. It then compares the fabrication methods that shape channels and chambers to a set design. Biomedical uses take centre stage. The chips can prepare nanoparticles and load drugs into carriers. They can also aim drugs at targets, analyse cells, support diagnosis, and grow cell cultures. The authors weigh the strengths of each route. Readers get a full tour of a young but fast-spreading technology.
Catalog record
| CREATOR | Niculescu AG, Chircov C, Bîrcă AC, Grumezescu AM. |
|---|---|
| YEAR | 2021 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 100 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Fabrication and Applications of Microfluidic Devices: A Review By Adelina-Gabriela Niculescu, Cristina Chircov, Alexandra Cătălina Bîrcă, Alexandru Mihai Grumezescu, Ida Genta, Bice Conti Published in: International Journal of Molecular Sciences DOI: 10.3390/ijms22042011 ABSTRACT Abstract Microfluidics is a relatively newly emerged field based on the combined principles of physics, chemistry, biology, fluid dynamics, microelectronics, and material science. Various materials can be processed into miniaturized chips containing channels and chambers in the microscale range. A diverse repertoire of methods can be chosen to manufacture such platforms of desired size, shape, and geometry. Whether they are used alone or in combination with other devices, microfluidic chips can be employed in nanoparticle preparation, drug encapsulation, delivery, and targeting, cell analysis, diagnosis, and cell culture. This paper presents microfluidic technology in terms of the available platform materials and fabrication techniques, also focusing on the biomedical applications of these remarkable devices. Keywords: microfluidic devices, fabrication techniques, chip materials, biomedical applications, drug delivery, organ-on-a-chip 1. INTRODUCTION According to George Whitesides, one of the most important personalities in this field, microfluidics represents “the science and technology of systems that process or manipulate small (10–9 to 10–18 L) amounts of fluids, using channels with dimensions of tens to hundreds of micrometers” [1,2,3]. Microfluidics evolved from the convergence of technologies and principles from several pre-existing domains, such as chemistry, physics, biology, material science, fluid dynamics, and microelectronics [1,4]. While the field of microfluidics, as such, is quite new, the concept of microchannels was previously integrated in the component capillaries of gas chromatography and capillary electrophoresis equipment (made of glass or quartz) or in flow reactors (made of metal) [2]. Consequently, more sophisticated structures for liquid flow guiding through microchannels started to be documented in patents from the 1980s [5]. Nevertheless, the debut of microfluidic technologies is considered to have been taken place in the 1990s, since when it has experienced exponential growth and become a powerful tool with enormous development potential [6,7,8,9]. Such miniaturized microscale devices are useful instruments for carrying out operations like reactions, separations, or the detection of various compounds [4,10]. Depending on their application and functional particularities, microfluidic devices can also be found in the literature as microreactors [3,6,11], lab-on-a-chip [12,13,14], or organ-on-a-chip [4,15,16]. Providing their destination use, microfluidic chips can be manufactured from a broad range of materials, employing diverse fabrication methods [17,18]. As many manufacturing techniques have already been presented in the literature and adopted in practice [10,19,20], the potential for advances in the field of microfluidics increases abruptly, bringing new perspectives to both the academic and industrial sectors [18]. Besides, this technology is promising for day-to-day applications, as several commercially available devices are already employed in pregnancy at-home-testing; virus (e.g., human immunodeficiency virus (HIV); Coronavirus Disease 19 (COVID-19); Herpes Simplex; and Hepatitis A, B, and C) rapid testing; and blood glucose monitoring [21,22]. The present review aims to thoroughly describe microfluidic technologies from the perspectives of chip fabrication in terms of material and method types and the main applications of the obtained devices. 2. FABRICATION OF MICROFLUIDIC DEVICES 2.1. Microfluidic Device Materials One of the fundamental steps in microfluidic applications is selecting the optimum material for device fabrication [11]. Since, on a microscale surface, the properties are much more amplified, the platform material is likely to affect the properties of synthesized nanomaterials [2,6]. Specifically, unique phenomena emerge in capillary microfluidics due to shorter retention times, laminar flows, enhanced heat and mass transfer, and large surface-to-volume ratios [2]. Unlike for macroscale vessels, the wetting and contact angles of an aqueous solution on the chip materials are of fundamental importance [5]. Other essential properties that must be considered when choosing the material are durability, ease of fabrication, transparency, biocompatibility, chemical compatibility with the implied reagents, meeting the temperature and pressure conditions needed for the reaction, and the potential of the surface functionalization [11,23,24]. Various kinds of materials attempt to match these properties and can be used for the manufacturing of microfluidic devices [10,25]. Typical substrates include glass, silicon, metals, polymers, and ceramics, but the diversity and quality of materials are continuously increasing [6,11,17,24,25]. Each material has both advantages and disadvantages, depending on its destination use [6]. Metals present a series of advantages that make them suitable for microchip fabrication. They are cheap, widely accessible, easy to a machine; and can withstand high heat loads, high pressure, and toxic chemicals (except strong acids). Besides, their resistance to robust handling is convenient for cleaning operations [25,26,27]. The most popular metals for microfluidic devices are aluminum, copper, and iron, but they are most commonly found in alloys with other metals in order to fine-tune their chemical resistances [27]. Microfluidic devices made of metals have been demonstrated useful in nanomaterial synthesis, as size-tunable methacrylic nanoparticles were obtained in a stainless steel multi-lamination micromixer [26]. Silicon is among the first choices when it comes to microfluidic systems fabrication due to its ready availability, chemical compatibility, and thermostability [25,28]. The ease of fabrication, design flexibility, semiconducting properties, and the possibility of surface modifications provided enough reasons for silicon to be the dominant material for microfluidic platforms for decades [17]. However, several disadvantages must be considered when including this material in practical applications. The most evident limitation is the opacity of silicon, which renders it incompatible for optical detection in the visible and ultraviolet regions [2,10,25,28]. If in situ imaging is required, at least a portion of the device must be non-silicon [29]. Moreover, being quite fragile and having a high elastic modulus, incorporating active components, i.e., valves and pumps, in the silicon platform is complicated [17,28]. The price is also not in favor of silicon, as it is a relatively expensive material [10,25,28]. Nonetheless, silicon microfluidic platforms find use in biological applications, such as point-of-care medical diagnostics and organ-on-chip devices for drug toxicity screening [17]. Glass is chemically inert [10,17,28,30], thermostable [10,25,28], electrically insulating [2], rigid [28], biologically compatible [10,17], and allows easy surface functionalization [24,25,28]. These properties make glass-based microreactors suitable for carrying out chemical reactions that require extreme conditions: high temperatures, high pressures, and aggressive solvents [6,17,24,25]. The higher resolution at the micrometer scale that is achieved in glass microcapillary reactors compared with other materials makes these devices suitable for the better-controlled synthesis of emulsions and polymeric nanoparticles [26]. Compared to silicon, glass also has the advantages of excellent optical transparency [2,10,17], a lower price [28], and the possibility of integrating active components [17]. Not only valves and pumps of other materials (e.g., silicon, polymers, and hydrogel) can be employed in such chips, but the glass itself can be integrated as an active component in the form of ultra-thin glass sheets (0.004-mm in thickness) [31]. Due to its transparency, glass can be used for optical detection [25]. Additionally, the glass’s thermal and chemical stability allows for the effective cleaning of the device once the experiment is over, either by heating the chip or washing it with chemicals [30]. Additionally, glass is the traditional material for chemists and biologists, being chosen for most laboratory ware productions [25]. Glass compatibility with biological samples makes it useful for biochemical analyses [17]. Hence, it is no surprise that glass is one of the most popular materials for microfluidic chips [24]. In terms of composition,