Lattice oxygen activation enabled by high-valence metal sites for enhanced water oxidation.

Zhang N, Feng X, Rao D, Deng X, Cai L, Qiu B, Long R, Xiong Y, Lu Y, Chai Y. · 2020

Read Lattice oxygen activation enabled by high-valence metal sites for enhanced water oxidation. by Zhang N, Feng X, Rao D, Deng X, Cai L, Qiu B, Long R, Xiong Y, Lu Y, Chai Y. (2020) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc7426847.txt.

Introduction

Zhang and co-authors report a catalyst that speeds water oxidation, the slow step in splitting water for fuel. High-valence metal sites can drive the reaction fast, but they are hard to form. The team worked with a film of iron, cobalt, chromium, and nickel alloy.

On the film surface, a rebuilt oxyhydroxide layer forms during use. Iron helps nickel climb to the rare Ni4+ state in steps. That state pushes holes into oxygen atoms and wakes lattice oxygen for the reaction. Iron-nickel pairs then act as the true active sites. The catalyst reached high mass activity and turnover at an overpotential of 300 mV in alkaline solution. Spectroscopy and theory together explain how the sites form and work.

Catalog record

CREATORZhang N, Feng X, Rao D, Deng X, Cai L, Qiu B, Long R, Xiong Y, Lu Y, Chai Y.
YEAR2020
COLLECTIONPAPERS
FORMATTXT
FILE SIZE64 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC7426847

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Lattice oxygen activation enabled by high-valence metal sites for enhanced water oxidation By Ning Zhang, Xiaobin Feng, Dewei Rao, Xi Deng, Lejuan Cai, Bocheng Qiu, Ran Long, Yujie Xiong, Yang Lu, Yang Chai Published in: Nature Communications DOI: 10.1038/s41467-020-17934-7 ABSTRACT Abstract Anodic oxygen evolution reaction (OER) is recognized as kinetic bottleneck in water electrolysis. Transition metal sites with high valence states can accelerate the reaction kinetics to offer highly intrinsic activity, but suffer from thermodynamic formation barrier. Here, we show subtle engineering of highly oxidized Ni4+ species in surface reconstructed (oxy)hydroxides on multicomponent FeCoCrNi alloy film through interatomically electronic interplay. Our spectroscopic investigations with theoretical studies uncover that Fe component enables the formation of Ni4+ species, which is energetically favored by the multistep evolution of Ni2+→Ni3+→Ni4+. The dynamically constructed Ni4+ species drives holes into oxygen ligands to facilitate intramolecular oxygen coupling, triggering lattice oxygen activation to form Fe-Ni dual-sites as ultimate catalytic center with highly intrinsic activity. As a result, the surface reconstructed FeCoCrNi OER catalyst delivers outstanding mass activity and turnover frequency of 3601 A gmetal−1 and 0.483 s−1 at an overpotential of 300 mV in alkaline electrolyte, respectively. Subject terms: Catalytic mechanisms, Density functional theory, Electrocatalysis INTRODUCTION In recent few decades, there have been continuous developments towards water electrolysis, as the cathodically electrolytic hydrogen is proposed as an ideal energy carrier for the storage of sustainable but intermittent energy, such as wind and solar energy1–3. Current bottleneck mainly originates from four-electron process in anodic oxygen evolution reaction (OER), which requires large overpotential to surmount its sluggish reaction kinetics4,5. However, the high cost and instability of state-of-the-art iridium- and ruthenium-based electrocatalysts largely prevent their practical applications6,7. Earth-abundant catalysts based on 3d transition metals have been demonstrated as the promising alternatives for OER, especially in alkaline electrolyte8–13. Meanwhile, experimental and theoretical studies reach a consensus that late transition metals with high valence states exhibit superior activities2,14–16. The increased holes in d-band of highly oxidized metal species can enhance the covalency of metal–oxygen (M–O) bonds to promote the charge transfer9,14. More importantly, high valency typically induces the downshift of metal d-band to penetrate p-band of oxygen ligands17. The redox electrochemistry of oxygen ligands will be triggered by driving holes into the related oxygen p-band, making lattice oxygen atoms electrophilic to participate in water oxidation, so called lattice oxygen activation mechanism (LOM)12,17,18. This alternative pathway facilitates the direct lattice oxygen coupling (LOC) by sharing the ligand holes, thereby lowering the limiting energy barrier. Thus, we can expect that rationalization of LOM pathway with highly oxidized metal species provides a promising avenue to maximize efficiency of OER electrocatalysts. However, according to the Pourbaix diagrams, it usually requires more elevated potential to realize deep oxidation of metal species15,16, causing the thermodynamically unfavorable formation of highly oxidized metal species. Those disadvantages make LOM pathway unpredictable and hinder the exploitation of efficient OER electrocatalysts. Therefore, it is highly desirable to steer the highly oxidized metal species with minimizing their formation energy. In general, the OER electrocatalysts undergo the surface reconstruction into (oxy)hydroxides, independent of initial composition and structure19–21, wherein the structural flexibility of (oxy)hydroxides enables the dynamic self-optimization of catalytically active sites. This dynamic reconstruction normally involves oxidation of metal sites, along with adsorption of oxygen species and/or deprotonation of hydroxyl. Therefore, the redox electrochemistry is directly related to the chemical affinity between metal sites and oxygen species, which can be subtly manipulated by the variation of electronic states11,21–23. Multimetal-based electrocatalysts typically endows more superior activities than single-metal catalysts, as the interatomically electronic interplay can efficiently modulate the electronic structure of metal sites that can hardly achieve for single-metal catalysts, offering an effective approach to tune the redox electrochemistry and engineer highly oxidized metal species24–26. Owing to their structural complicacy, it is still a challenging task to rationally design efficient multimetal OER catalysts with high valence metal sites and fundamentally understand their structure-activity correlation. Multicomponent alloy (MCA) materials have recently received extensive attention because of their unique intrinsic properties27,28. The adjustable components make them feasible to serve as templates for multimetal-based electrocatalysts. By rational engineering, it enables the formation of highly oxidized metal species and tune on LOM. Here, we demonstrate that an FeCoCrNi MCA film can dynamically form highly oxidized metal species during OER process with decreasing formation energy after undergoing irreversible surface reconstruction. Our spectroscopic investigations and theoretical simulations reveal that the interatomically electronic interplay in surface reconstructed multimetal (oxy)hydroxide (MOxHy) plays a key role on subtly engineering highly oxidized Ni4+ species to favor LOM pathway. Fe component induces electron depletion in Ni species to ensure the dynamic formation of Ni4+ species. Meanwhile, a multistep evolution of Ni2+→Ni3+→Ni4+ lowers the overall energy barrier of Ni4+ formation, facilitated by pre-adsorbed bridging hydroxyl at Ni-Co site. The constructed Ni4+ species drives holes into oxygen ligands to tune on intramolecular LOC via Mars-van Krevelen-like mechanism, thereby evoking LOM pathway. A unique Fe–Ni dual-site with oxygen vacancies (OVs) is formed after desorbing the coupled peroxo-like oxygen species to serve as ultimate catalytic center, substantially promoting OER activity. RESULTS Preparation and characterizations of catalytic systems A two-step procedure was used to prepare the multimetal-based electrocatalysts, as shown in Fig. 1a. We firstly employed magnetron sputtering method (Supplementary Fig. 1)29,30 to deposit MCA films (quaternary FeCoCrNi and ternary FeCrNi and CoCrNi) on pretreated carbon clothes (CCs). Scanning electron microscopy (SEM) images (Fig. 1b and Supplementary Figs. 2 and 3) demonstrate that the films are tightly and uniformly coated on the surface of CCs. The characteristic peak at 2θ = 44.2° in X-ray diffraction (XRD) patterns (Supplementary Fig. 4) of MCA films can be indexed to (111) lattice planes of face-centered cubic (FCC) phase30. Transmission electron microscope (TEM) image of FeCoCrNi MCA sample (Supplementary Fig. 5) displays its polycrystalline feature, as the film is composed by interconnected nanocrystals with the size of ~5 nm (see magnified TEM image in Fig. 1c). The related High-resolution TEM (HRTEM) image together with corresponding fast Fourier transform (FFT) pattern (Fig. 1d) exhibit the ordered lattice fringes with a spacing of 2.1 Å, which can be assigned to the (111) planes, in good agreement with XRD peaks. To examine the elemental composition and distribution in MCA films, energy dispersive X-ray spectroscopy (EDS) mapping images were collected, which clearly demonstrate the uniformly elemental distribution throughout the measured region (Supplementary Fig. 6). Quantitative analysis reveals the elemental distribution is nominally equiatomic with slightly lower Cr concentration (ca. 80%), coinciding with inductively coupled plasma mass spectrometry (ICP-MS) results (Supplementary Fig. 7 and Supplementary Table 1). The homogenous elemental distribution is reaffirmed by 3D atomic-probe tomography (APT) in atomic scale30, where 3D APT probing reconstruction images (Fig. 1e) show negligible segregation and clustering. Besides, X-ray photoelectron spectroscopy (XPS) was adopted to characterize the electronic states of MCA films (Supplementary Figs. 8 and 9 and Supplementary Table 2). The MCA films exhibit the metallic feature with inevitable surface oxidation. The oxidized degree of various metal components is well distinguished and positively correlates to the related metal reduction potentials (Supplementary Table 3). More details are discussed in Supplementary Note 1. [Figure: Characterizations of as-prepared electrocatalysts.a Schematic illustration of the electrocatalyst preparation. b–e Structural characterizations of pristine FeCoCrNi MCA film. b SEM image.

Read the complete text