Mini-LED, Micro-LED and OLED displays: present status and future perspectives.
Huang Y, Hsiang EL, Deng MY, Wu ST. · 2020
Read Mini-LED, Micro-LED and OLED displays: present status and future perspectives. by Huang Y, Hsiang EL, Deng MY, Wu ST. (2020) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc7303200.txt.
Introduction
Huang and co-authors compare the display technologies fighting to succeed today's screens. Their review appeared in Light: Science and Applications. Liquid crystal and OLED displays currently dominate. Two newcomers, mini-LED and micro-LED, promise better dynamic range for backlit LCDs or bright emissive screens readable in sunlight.
The authors analyze materials, device structures, and performance across all the contenders. They compare power consumption and contrast in ambient light in depth, plus response time for moving images, dynamic range, and how well each technology adapts to flexible or transparent displays. Each option's strengths and weaknesses are laid out, with a judgment on future prospects for phones, televisions, projectors, and virtual reality headsets, where the winner is still undecided.
Catalog record
| CREATOR | Huang Y, Hsiang EL, Deng MY, Wu ST. |
|---|---|
| YEAR | 2020 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 72 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mini-LED, Micro-LED and OLED displays: present status and future perspectives By Yuge Huang, En-Lin Hsiang, Ming-Yang Deng, Shin-Tson Wu Published in: Light, Science & Applications DOI: 10.1038/s41377-020-0341-9 ABSTRACT Abstract Presently, liquid crystal displays (LCDs) and organic light-emitting diode (OLED) displays are two dominant flat panel display technologies. Recently, inorganic mini-LEDs (mLEDs) and micro-LEDs (μLEDs) have emerged by significantly enhancing the dynamic range of LCDs or as sunlight readable emissive displays. “mLED, OLED, or μLED: who wins?” is a heated debatable question. In this review, we conduct a comprehensive analysis on the material properties, device structures, and performance of mLED/μLED/OLED emissive displays and mLED backlit LCDs. We evaluate the power consumption and ambient contrast ratio of each display in depth and systematically compare the motion picture response time, dynamic range, and adaptability to flexible/transparent displays. The pros and cons of mLED, OLED, and μLED displays are analysed, and their future perspectives are discussed. Subject terms: Inorganic LEDs, Displays INTRODUCTION Display technology has become ubiquitous in our daily life; its widespread applications cover smartphones, tablets, desktop monitors, TVs, data projectors and augmented reality/virtual reality devices. The liquid crystal display (LCD) was invented in the late 1960s and early 1970s1–4. Since the 2000s, LCDs have gradually displaced bulky and heavy cathode ray tubes (CRTs) and have become the dominant technology5,6. However, an LCD is nonemissive and requires a backlight unit (BLU), which not only increases the panel thickness but also limits its flexibility and form factor. Meanwhile, after 30 years of intensive material7–14 and device development and heavy investment in advanced manufacturing technologies, organic light-emitting diode (OLED) displays7,14–17 have grown rapidly, enabling foldable smartphones and rollable TVs. In the past few years, emissive OLED displays have gained momentum and have competed fiercely with LCDs in TVs and smartphones because of their superior unprecedented dark state, thin profile, and freeform factor. However, some critical issues, such as burn-in and lifetime, still need to be improved. Recently, micro-LEDs (μLEDs)18–27 and mini-LEDs (mLEDs)24,25,28 have emerged as next-generation displays; the former is particularly attractive for transparent displays19,29–31 and high luminance displays21–23, while the latter can serve either as a locally dimmable backlight for high dynamic range (HDR) LCDs24,28 or as emissive displays21–24. Both mLEDs and μLEDs offer ultrahigh luminance and long lifetimes. These features are highly desirable for sunlight readable displays, such as smartphones, public information displays, and vehicle displays. Nevertheless, the largest challenges that remain are the mass transfer yield and defect repair, which will definitely affect the cost. “LCD, OLED or μLED: who wins?” has become a topic of heated debate11. To compare different displays, the following are important performance metrics: (1) a HDR and a high ambient contrast ratio (ACR)32, (2) high resolution or a high resolution density for virtual reality to minimize the screen-door effect, (3) a wide colour gamut33–35, (4) a wide viewing angle and an unnoticeable angular colour shift6,36–40, (5) a fast motion picture response time (MPRT) to suppress image blur41,42, (6) low power consumption, which is particularly important for battery-powered mobile displays, (7) a thin profile, freeform, and lightweight system, and (8) low cost. In this review paper, we compare the performance of mLEDs, OLEDs and μLEDs according to the abovementioned criteria. In particular, we evaluate the power consumption and ACR of each display in depth and systematically compare the dynamic range, MPRT, and adaptability to flexible and transparent displays. The pros and cons of mLED, μLED, and OLED displays are analysed, and their future perspectives are discussed. DEVICE CONFIGURATIONS Both mLED, μLED and OLED chips can be used as emissive displays, while mLEDs can also serve as a BLU for LCDs. Figure 1 illustrates three commonly used device configurations: red, green and blue (RGB)-chip emissive displays26,27 (Fig. 1a), colour conversion (CC) emissive displays25 (Fig. 1b), and mLED-backlit LCDs24,28 (Fig. 1c). In emissive displays (Fig. 1a, b), mLED/μLED/OLED chips serve as subpixels. In a nonemissive LCD (Fig. 1c), an mLED backlight is segmented into a zone structure; each zone contains several mLED chips to control the panel luminance, and each zone can be turned on and off selectively. The LC panel consists of M and N pixels, and each RGB subpixel, addressed independently by a thin-film transistor (TFT), regulates the luminance transmittance from the backlight. The full-colour images are generated differently in these three types. In Fig. 1a, RGB LED chips are adopted. Each LED will emit light in both the upward and downward directions. To utilize downward light, a reflective electrode is commonly deposited at the bottom of each LED chip. However, such a reflector also reflects the incident ambient light, which could degrade the ACR32. One solution is to adopt tiny chips to reduce the aperture ratio and cover the nonemitting area with a black matrix to absorb the incident ambient light26. This strategy works well for inorganic LEDs. However, for OLED displays, a large chip size helps to achieve a long lifetime and high luminance43. Under such conditions, to suppress the ambient light reflection from bottom electrodes, a circular polarizer (CP) is commonly laminated on top of the OLED panel to block the reflected ambient light from the bottom electrodes. [Figure: Display system configurations.a RGB-chip mLED/μLED/OLED emissive displays. b CC mLED/μLED/OLED emissive displays. c mini-LED backlit LCDs] In Fig. 1b, each blue LED chip pumps a subpixel in the patterned CC layer (quantum dots or phosphors)44. An absorptive colour filter (CF) array is registered above to absorb unconverted blue light44,45 and suppress ambient excitations. This filter also enhances the ACR so that no CP is required. In some designs, a distributed Bragg reflector (DBR) is inserted to selectively recycle the unconverted blue light46 or to enhance the red/green output efficiency47. In Fig. 1c, blue mLED chips pump a yellow CC layer48 to generate white backlight. Additionally, a DBR could be optionally applied. In such a BLU, the mLED zones do not need to register with the subpixels so that a larger LED chip can be used. Because the CC layer scatters light, up to two brightness enhancement films (BEFs) can be employed to collimate light onto the on-axis direction. A dual brightness enhancement film (DBEF)49 can be inserted to transmit the preferred polarization, which is parallel to the transmission axis of the first polarizer and to recycle the orthogonal polarization. The transmitted light is modulated by the LCD with an absorptive CF array. In some designs, RGBW CFs instead of RGB CFs are employed to enhance the optical efficiency. POWER CONSUMPTION The power consumption of mLED/μLED/OLED displays is primarily determined by the driving circuitry designs, LED quantum efficiency and optical system efficiency. In this section, we describe a power consumption evaluation model and give exemplary calculations on each display technology. Pulse amplitude modulation (PAM) driving schemes PAM50, which is also called analogue driving, is commonly used in emissive OLED displays51,52. PAM is also an intuitive choice for μLED drivers. Both active matrix (AM) and passive matrix (PM) addressing techniques can be adopted in PAM53. Figure 2a shows a basic 2 transistors and 1 capacitor (2T1C) subpixel circuitry in AM addressing. In an emissive display panel with M by N pixels, the circuitry in Fig. 2a is arrayed by 3M columns (each pixel contains RGB subpixels) and N