Detection of air and surface contamination by SARS-CoV-2 in hospital rooms of infected patients.
Chia PY, Coleman KK, Tan YK, Ong SWX, Gum M, Lau SK, Lim XF, Lim AS, Sutjipto S, Lee PH, Son TT, Young BE, Milton DK, Gray GC, Schuster S, Barkham T, De PP, Vasoo S, Chan M, Ang BSP, Tan BH, Leo YS, Ng OT, Wong MSY, Marimuthu K, Singapore 2019 Novel Coronavirus Outbreak Research Team. · 2020
Read Detection of air and surface contamination by SARS-CoV-2 in hospital rooms of infected patients. by Chia PY, Coleman KK, Tan YK, Ong SWX, Gum M, Lau SK, Lim XF, Lim AS, Sutjipto S, Lee PH, Son TT, Young BE, Milton DK, Gray GC, Schuster S, Barkham T, De PP, Vasoo S, Chan M, Ang BSP, Tan BH, Leo YS, Ng OT, Wong MSY, Marimuthu K, Singapore 2019 Novel Coronavirus Outbreak Research Team. (2020) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc7260225.txt.
Introduction
Chia and co-authors checked hospital rooms for traces of SARS-CoV-2 in air and on surfaces. Their study appeared in Nature Communications. Samples came from isolation rooms in an intensive care unit and a general ward in Singapore. The aim was to learn how much virus patients leave around them, and at what stage of illness.
The team took 245 surface samples from 30 rooms. More than half of the rooms had at least one positive surface. Floors, bed rails and air vents were often positive. High-touch surfaces were most often positive in the first week of illness. Air tests found viral RNA in two of three rooms sampled. The authors say airborne spread needs more study.
Catalog record
| CREATOR | Chia PY, Coleman KK, Tan YK, Ong SWX, Gum M, Lau SK, Lim XF, Lim AS, Sutjipto S, Lee PH, Son TT, Young BE, Milton DK, Gray GC, Schuster S, Barkham T, De PP, Vasoo S, Chan M, Ang BSP, Tan BH, Leo YS, Ng OT, Wong MSY, Marimuthu K, Singapore 2019 Novel Coronavirus Outbreak Research Team. |
|---|---|
| YEAR | 2020 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 28 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Detection of air and surface contamination by SARS-CoV-2 in hospital rooms of infected patients By Po Ying Chia, Kristen Kelli Coleman, Yian Kim Tan, Sean Wei Xiang Ong, Marcus Gum, Sok Kiang Lau, Xiao Fang Lim, Ai Sim Lim, Stephanie Sutjipto, Pei Hua Lee, Than The Son, Barnaby Edward Young Published in: Nature Communications DOI: 10.1038/s41467-020-16670-2 ABSTRACT Understanding the particle size distribution in the air and patterns of environmental contamination of SARS-CoV-2 is essential for infection prevention policies. Here we screen surface and air samples from hospital rooms of COVID-19 patients for SARS-CoV-2 RNA. Environmental sampling is conducted in three airborne infection isolation rooms (AIIRs) in the ICU and 27 AIIRs in the general ward. 245 surface samples are collected. 56.7% of rooms have at least one environmental surface contaminated. High touch surface contamination is shown in ten (66.7%) out of 15 patients in the first week of illness, and three (20%) beyond the first week of illness (p = 0.01, χ2 test). Air sampling is performed in three of the 27 AIIRs in the general ward, and detects SARS-CoV-2 PCR-positive particles of sizes >4 µm and 1–4 µm in two rooms, despite these rooms having 12 air changes per hour. This warrants further study of the airborne transmission potential of SARS-CoV-2. INTRODUCTION Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causing coronavirus disease 2019 (COVID-19) has spread globally and many countries are experiencing ongoing local transmission despite varying levels of control efforts. Understanding the different transmission routes of SARS-CoV-2 is crucial in planning effective interventions to break the chain of transmission. Although extensive surface contamination with SARS-CoV-2 by a symptomatic patient has been demonstrated1, little is known about airborne transmission of SARS-CoV-2. It is also unknown if asymptomatic individuals pose the same environmental contamination risk as symptomatic ones, although viral shedding has been demonstrated to continue even after clinical recovery of COVID-19 patients2. There are multiple reports of asymptomatic patients testing positive for SARS-CoV-23,4, and the potential transmission of the virus by an asymptomatic person has been described5. Therefore, viral contamination of the air and surfaces surrounding asymptomatic or recovering COVID-19 patients could have serious implications for outbreak control strategies. This knowledge gap is recognized in the Report of the WHO-China Joint Mission on Coronavirus 20196. The primary objective of our study is to identify potential patient-level risk factors for environmental contamination by SARS-CoV-2 by sampling the air and surfaces surrounding hospitalized COVID-19 patients at different stages of illness. RESULTS Air and environmental sampling Environmental sampling was conducted in three airborne infection isolation rooms (AIIRs) in the ICU and 27 AIIRs in the general ward. Air sampling was performed in three of the 27 AIIRs in the general ward. All patients reported COVID-19 symptoms. Seven patients (23%) were asymptomatic at the time of environmental sampling. Of the 23 symptomatic patients, 18 (78%) had respiratory symptoms, 1 had gastrointestinal symptoms, 1 had both respiratory and gastrointestinal symptoms, and 3 patients (10%) had fever or myalgia only (Supplementary Table 1). Air samples from two (66.7%) of three AIIRs tested positive for SARS-CoV-2, in particle sizes >4 µm and 1–4 µm in diameter (Table 1). Samples from the fractionated size <1 µm were all negative, as were all non-size-fractionated SKC polytetrafluoroethylene (PTFE) filter cassette samples. Total SARS-CoV-2 concentrations in air ranged from 1.84 × 103 to 3.38 × 103 RNA copies per m3 air sampled. Rooms with viral particles detected in the air also had surface contamination detected.Table 1Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) detections in the air of hospital rooms of infected patient.PatientDay of illnessSymptoms reported on day of air samplingClinical Ct valueaAirborne SARS-CoV-2 concentrations (RNA copies m−3 air)Aerosol particle sizeSamplers used19Cough, nausea, dyspnea33.22ND>4 μmNIOSHND1–4 μmND<1 μmND–SKC filters25Cough, dyspnea18.452,000>4 μmNIOSH1,3841–4 μmND<1 μm35Asymptomaticb20.11927>4 μmNIOSH9161–4 μmND<1 μmND none detected.aPCR cycle threshold value from patient’s clinical sample.bPatient reported fever, cough, and sore throat until the day before the sampling. Patient reported no symptoms on the day of sampling, however was observed to be coughing during sampling. There were no baseline differences between patients with environmental surface contamination and those without, in terms of age, comorbidities, and positive clinical sample on the day of sampling. Median cycle threshold (Ct) values of the clinical specimens for patients with and without environmental surface contamination were 25.69 (IQR 20.37–34.48) and 33.04 (28.45–35.66), respectively (Table 2).Table 2Baseline clinical characteristics of COVID-19 patients with environmental contamination.Characteristics of COVID-19 patientsRooms with surface environment contamination (n = 17)Rooms without surface environment contamination (n = 13)P valueMedian age (IQR)52 (42–62)44 (36–55)0.75Male Sex (%)6 (46%)8 (47%)0.96Median Age Adjusted Charlson’s Comorbidity Index (IQR)1 (0–2)1 (0–1)0.69Median day of Illness (IQR)5 (4–9)13 (5–20)0.17Median day of stay in room (IQR)3 (3–8)4 (2–16)0.95Oxygen requirement (%)04 (31)0.03Symptomatic (%)12 (71)11 (85)0.43Respiratory symptoms (%)11 (65)7 (54)0.55Gastrointestinal symptoms (%)1 (6)1 (8)>0.99Clinical Cycle threshold value, median (IQR)a25.69 (20.37–34.48)33.04 (28.45–35.66)0.06aPCR cycle threshold value from patient’s clinical sample.χ2 or Fisher’s exact test was used to compare categorial variables; and Student's t test or nonparametric Wilcoxon rank-sum was used to compare continuous variables. Of the rooms with environmental contamination, the floor was most likely to be contaminated (65%), followed by the air exhaust vent (60%, n = 5), bed rail (59%), and bedside locker (47%) (Fig. 1). Contamination of toilet seat and automatic toilet flush button was detected in 5 out of 27 rooms, and all 5 occupants had reported gastrointestinal symptoms within the preceding 1 week of sampling. We did not detect surface contamination in any of the three ICU rooms.Fig. 1Percentage of contaminated swabs from surface samples, in rooms with any contamination.All sites were n = 17, except for air exhaust vents where n = 5. Presence of environmental surface contamination was higher in week 1 of illness (Fig. 2) and showed association with the clinical cyclical threshold (P = 0.06, Wilcoxon rank-sum test). Surface environment contamination was not associated with the presence of symptoms (Table 2). In a subgroup analysis, the presence and extent of high-touch surface contamination were significantly higher in rooms of patients in their first week of illness (Fig. 2). The best fit curve with the least-squares fit (Fig. 3) showed that the extent of high-touch surface contamination declined with increasing duration of illness and Ct values. There was also no correlation between the Ct values of clinical samples and the Ct values of environmental samples across the days of illness (Supplementary Fig. 3).Fig. 2Extent of environmental contamination correlated with day of illness timepoint.a Percentage of patients with contamination of high-touch surfaces in the first week of illness compared with more than first week of illness, n = 15 in both groups. b Percentage of surfaces contaminated across weeks of illness with median and 95% confidence intervals. c. Percentage of high-touch surfaces contaminated across weeks of illness with median and 95% confidence intervals.Fig. 3Patient and disease factors affecting percentage of high-touch contamination.a Mean percentage of high-touch surface contaminated by day of illness with 95% confidence interval with best fit curve, n = 30. b Percentage of high-touch surfaces contaminated by clinical cycle threshold values with 95% confidence interval with bestfit curve, n = 30. c Mean percentage of high-touch surface contaminated by day of illness with 95% confidence interval grouped by symptoms, n = 30. DISCUSSION Surface sampling revealed that the