Atmospheric microplastic deposition in an urban environment and an evaluation of transport.

Wright SL, Ulke J, Font A, Chan KLA, Kelly FJ. · 2020

Read Atmospheric microplastic deposition in an urban environment and an evaluation of transport. by Wright SL, Ulke J, Font A, Chan KLA, Kelly FJ. (2020) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc7013824.txt.

Introduction

Wright and co-authors measure microplastics falling from the air over central London. Their study appeared in Environment International. Plastic waste persists for decades before crumbling into particles under five millimetres. Such particles were long treated as a sea problem; now they turn up in rivers, soils, and city air.

Samplers on a London rooftop caught a steady rain of plastic. Fibres dominated, averaging over 700 particles per square metre per day, with polyacrylonitrile the commonest polymer, likely shed from clothing and fabrics. Non-fibre particles added a smaller share. Matched by size, London levels ran about twenty times those at a remote site. Nearby source areas swayed the counts, while weather showed no clear link. As global plastic output heads toward a projected 25 billion tonnes by 2050, the authors frame airborne plastic as a pollution route in its own right.

Catalog record

CREATORWright SL, Ulke J, Font A, Chan KLA, Kelly FJ.
YEAR2020
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC7013824

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Atmospheric microplastic deposition in an urban environment and an evaluation of transport By SL Wright, J Ulke, A Font, KLA Chan, FJ Kelly Published in: Environment International DOI: 10.1016/j.envint.2019.105411 ABSTRACT Highlights - •Microplastics were present in atmospheric deposition in central London. - •Comparing equal size classes, levels were 20 times greater than in a remote location. - •Fibrous morphologies dominated and polyacrylonitrile was the most common polymer. - •Local source areas influenced microplastic levels. Keywords: Microplastics, Atmospheric deposition, Air pollution, Urban INTRODUCTION Following current trends, global plastic production is projected to reach an accumulative 25 billion metric tonnes by 2050 (Geyer et al., 2017). Owing to its position as an integral material today is one of its key attributes; durability. Consequently, the proportion of the 4.9 billion discarded tonnes (Geyer et al., 2017) which has reached the environment, as opposed to landfill, recycling or incineration, has accumulated and persists in ecosystems worldwide. However, plastic does eventually lose mechanical integrity, via biotic and abiotic degradation pathways, including photooxidation and abrasion. Eventually, it emits particles known as microplastics to the wider environment (Klein et al., 2018). Microplastics define plastic particles ≤5 mm in size, although there are efforts to redefine them as ≤1 mm in size, as recommended by (Hartmann et al., 2019), and include primary microplastics which have been purposefully manufactured. Microplastics have predominantly been recognised as marine contaminants (Thompson et al., 2004, Desforges et al., 2014) with estimates of 93 to 236 thousand metric tons floating on the global sea surface (van Sebille et al., 2015). However, scientific perception is changing; evidence is emerging to show microplastics also permeate freshwater (Faure et al., 2015, Morritt et al., 2014) and terrestrial environments (Liu et al., 2018, Rillig, 2012). Considering where plastic is produced, used and disposed, combined with its degradation pathways, it can be anticipated that microplastics are emitted to and occur in our immediate environment on land. Microplastics have been measured in atmospheric fallout in the megacities of Paris, France (Dris et al., 2016) and Dongguan, China (Cai et al., 2017). (Dris et al., 2016) found average deposition rates of 110 ± 96/m2/d and 53 ± 38/m2/day in total atmospheric deposition collected at an urban and suburban site in Paris, respectively. In Dongguan City, China, an average deposition rate of 36 ± 7/m2/d was reported (Cai et al., 2017). Recently, microplastics were measured in deposition at a remote, pristine mountain catchment (French Pyrenees) at a comparable daily rate (365/m2/d) (Allen et al., 2019). Air mass trajectories suggested the microplastics had transported over a distance up to 95 km, reaching the sparsely inhabited areas (Allen et al., 2019). This was further supported by observations of microplastics in remote (Arctic, Swiss Alps) and urban (Bremen, Germany) snow, although estimated annual deposition in these regions was low (average 1.4–66 microplastics/m2) (Bergmann et al., 2019). Atmospheric transport of urban atmospheric microplastics is unknown, but a likely pathway to pristine environments. In the environment, microplastics can have detrimental effects on aquatic organisms when ingested (Sussarellu et al., 2016, Wright et al., 2013). The potential for human exposure via inhalation to occur is also of concern (Wright and Kelly, 2017). In addition to increasing our knowledge of long-range microplastic transport, it is equally important to examine microplastic contamination in major population centres. Here, concentrations are likely to be higher and therefore exposures greater compared to remote locations, however, there is a paucity of evidence on the extent of this phenomenon. The current study aims to contribute to the limited existing knowledge by examining whether microplastics are present in total (wet and dry) atmospheric deposition in a megacity environment, London (UK). Quantity, size, shape and polymer type are assessed, thereby improving our understanding of the characteristics of microplastic deposition in an urban environment. Local and longer-range geographical sources are evaluated for the first time using microplastic-specific characteristics (shape/aerodynamic equivalent diameter and density). MATERIALS AND METHODS The main aim of the study was to assess whether microplastics contaminate the air in central London. This was achieved via the following objectives (1) collect total deposition samples; (2) count suspected microplastics in samples; (3) confirm particle composition using FTIR; and (4) explore potential local geographical sources and transport. Field sampling 2.1. Total atmospheric deposition samples were collected from a nine-story-high roof (~50 m above ground level) at a riverside urban site in Central London (51.5111° N, 0.1171° W). Outdoor total atmospheric deposition samples were collected twice a week for 4 weeks, from the 19th of January to the 16th of February 2018 using an aluminium rain gauge with a 0.03 m2 (200 mm diameter) orifice (NovaLynx 260–2510 Standard Rain and Snow Gauge, US) which was continuously exposed, resulting in three or four-day sampling periods. Meteorological data was collected throughout the sample period via a Campbell Scientific weather station consisting of a datalogger (CR10X), temperature and relative humidity probe (HMP155A), wind monitor (wind speed and direction; 05103-L), and a tipping bucket rain gauge (SBS500). Three 1 L Duran bottles (with all plastic components removed) were filled with 1 L of filtered (0.45 μm) deionised (DI) water and covered with aluminium foil. Standing downwind, the contents of the 1 L bottles were carefully poured around the perimeter of the rain gauge surface, rinsing the sample into the central vessel. Each time, the sample was poured back into its original bottle, resulting in three successive washes. The aluminium foil was replaced to keep the sample covered. The samples were transported back to the laboratory, where they were kept in the dark at 4 °C until further processing (within approximately 4 days of collection). Sample preparation for analysis 2.2. To concentrate samples onto a substrate, they were initially vacuum filtered onto 0.2 μm pore size alumina-based membrane filters (GE Healthcare Whatman™ Anodisc™, UK). The resulting filtered water was then re-used to rinse the sample bottle three times, filtering the contents onto the sample filter each time. Finally, the filtered water was carefully poured down the sides of the top unit, to ensure any particles stuck to the sides were collected. The filter was immediately transferred to a glass petri dish and covered with the corresponding glass lid. The petri dishes were placed in an oven at 40 °C for approximately 4 h to dry, then stored in the dark at room temperature. To facilitate spectroscopic analysis, samples were transferred to silver membrane filters (1.2 μm pore size, Sterlitech, WA, USA), which have low signal interference compared to the alumina-based membrane filters (which were originally deemed appropriate). Samples were placed in glass beakers with 10 mL 10% HPLC-grade methanol in ultrapure H2O and extracted by standing beakers in a sonicating bath (Clifton™ Ultrasonic Bath, Fisher Scientific, UK) for 1 min. The methanol-particulate matter suspension was then vacuum-filtered. The original alumina filter was transferred into a new beaker and the process repeated as before. Finally, both beakers used in the sample extraction were thoroughly rinsed with 10% methanol and vacuum-filtrated onto the silver membrane filters (Sterlitech, WA, USA). Preliminary work found recovery rates of 86% (PS), 90% (PP, HDPE) and 93% (PET) for reference microplastics following this extraction procedure. Nile Red (NR) is a lipophilic dye which has been used to stain microplastics to facilitate their

Read the complete text