New tolerance factor to predict the stability of perovskite oxides and halides.
Bartel CJ, Sutton C, Goldsmith BR, Ouyang R, Musgrave CB, Ghiringhelli LM, Scheffler M. · 2019
Read New tolerance factor to predict the stability of perovskite oxides and halides. by Bartel CJ, Sutton C, Goldsmith BR, Ouyang R, Musgrave CB, Ghiringhelli LM, Scheffler M. (2019) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc6368436.txt.
Introduction
Bartel and co-authors present a research article in Science Advances on predicting perovskite stability. For ninety years, chemists used the Goldschmidt tolerance factor, a simple ratio of ion sizes. It sorts perovskites from other structures with only 74 percent accuracy, and far worse for heavier halides.
The team derived a new factor, tau, from data on 576 known compounds. Their factor reached 92 percent accuracy on the same set. It works for single and double perovskites, oxides and halides alike. Because it needs only a chemical formula, researchers can screen candidate materials quickly. The authors present it as a practical tool for materials discovery.
Catalog record
| CREATOR | Bartel CJ, Sutton C, Goldsmith BR, Ouyang R, Musgrave CB, Ghiringhelli LM, Scheffler M. |
|---|---|
| YEAR | 2019 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 51 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
New tolerance factor to predict the stability of perovskite oxides and halides By Christopher J. Bartel, Christopher Sutton, Bryan R. Goldsmith, Runhai Ouyang, Charles B. Musgrave, Luca M. Ghiringhelli, Matthias Scheffler Published in: Science Advances DOI: 10.1126/sciadv.aav0693 ABSTRACT Simple and interpretable data-driven descriptor accurately predicts the synthesizability of single and double perovskites. INTRODUCTION Crystal structure prediction from chemical composition continues as a persistent challenge to accelerated materials discovery (1, 2). Most approaches capable of addressing this challenge require several computationally demanding electronic-structure calculations for each material composition, limiting their use to a small set of materials (3–6). Alternatively, descriptor-based approaches enable high-throughput screening applications because they provide rapid estimates of material properties (7, 8). Notably, the Goldschmidt tolerance factor, t (9), has been used extensively to predict the stability of the perovskite structure based only on the chemical formula, ABX3, and the ionic radii, ri, of each ion (A, B, X)t=rA+rX2(rB+rX)(1) The perovskite crystal structure, as shown in Fig. 1A, is defined as any ABX3 compound with a network of corner-sharing BX6 octahedra surrounding a larger A-site cation (rA > rB), where the cations, A and B, can span the periodic table and the anion, X, is typically a chalcogen or halogen. Distortions from the cubic structure can arise from size mismatch of the cations and anion, which results in additional perovskite structures and nonperovskite structures. The B cation can also be replaced by two different ions, resulting in the double perovskite formula, A2BB′X6 (Fig. 1B). Single and double perovskite materials have exceptional properties for a variety of applications such as electrocatalysis (10), proton conduction (11), ferroelectrics (12) (using oxides, X = O2−), battery materials (13) (using fluorides, X = F−), as well as photovoltaics (14) and optoelectronics (15) (using the heavier halides, X = Cl−, Br−, I−). [Figure: Perovskite structure and composition.(A) ABX3, in the cubic single perovskite structure (Pm3¯m), where the A cation is surrounded by a network of corner-sharing BX6 octahedra. (B) A2BB′X6, in the rock salt double perovskite structure (Fm3¯m), where the A cations are surrounded by an alternating network of BX6 and B′X6 octahedra. In this structure, inverting the B and B′ cations results in an equivalent structure. While the ideal cubic structures are shown here, perovskites may also adopt various noncubic structures. (C) Map of the elements that occupy the A, B, and/or X sites within the 576 compounds experimentally characterized as perovskite or nonperovskite at ambient conditions and reported in (17–19).] The first step in designing new perovskites for these applications is typically the assessment of stability using t, which has informed the design of perovskites for over 90 years. However, as reported in recent studies, its accuracy is often insufficient (16). Considering 576 ABX3 solids experimentally characterized at ambient conditions and reported in (17–19) (see Fig. 1C for the A, B, and X elements in this set), t correctly distinguishes between perovskite and nonperovskite for only 74% of materials and performs considerably worse for compounds containing heavier halides [chlorides (51% accuracy), bromides (56%), and iodides (33%)] than for oxides (83%) and fluorides (83%) (Fig. 2A, fig. S1, and table S1). This deficiency in generalization to halide perovskites severely limits the applicability of t for materials discovery. [Figure: Assessing the performance of the improved tolerance factor, τ.(A) A decision tree classifier determines that the optimal bounds for perovskite formability using the Goldschmidt tolerance factor (t) are 0.825 < t < 1.059, which yields a classification accuracy of 74% for 576 experimentally characterized ABX3 solids. (B) τ achieves a classification accuracy of 92% on the set of 576 ABX3 solids based on perovskite classification for τ < 4.18, with this decision boundary identified using a one-node decision tree. All classifications made by t and τ on the experimental dataset are provided in table S1. The largest value of τ in the experimental set of 576 compounds is 181.5; however, all points with τ > 13 are correctly labeled as nonperovskite and are not shown to highlight the decision boundary. The outlying compounds at τ > 10 that are labeled perovskite yet have large τ are PuVO3, AmVO3, and PuCrO3, which may indicate poorly defined radii or incorrect experimental characterization. (C) Comparison of Platt-scaled classification probabilities, P(τ), versus t. LaAlO3 and NaBeCl3 are labeled to highlight the variation in P(τ) at nearly constant t. (D) Comparison between P(τ) and the decomposition enthalpy (ΔHd) for 36 double perovskite halides calculated using density functional theory (DFT) in the Fm3¯m structure in (32) and 37 single and double perovskite chalcogenides and halides in the Pm3¯m structure in (33). The legend corresponds with the anion, X. Positive decomposition enthalpy (ΔHd > 0) indicates that the structure is stable with respect to decomposition into competing compounds. The green and white shaded regions correspond with agreement and disagreement between the calculated ΔHd and the classification by τ. Points of disagreement are outlined in red. CaZrO3 and CaHfO3 are labeled because they are known to be stable in the perovskite structure, although they are unstable in the cubic structure (34, 35). For this reason, the best-fit line for the chalcogenides (X = O2−, S2−, Se2−) excludes these two points.] In this work, we present a new tolerance factor (τ), which has the formτ=rXrB−nA(nA−rA/rBln(rA/rB))(2)where nA is the oxidation state of A, ri is the ionic radius of ion i, rA > rB by definition, and τ < 4.18 indicates perovskite. A high overall accuracy of 92% for the experimental set (94% for a randomly chosen test set of 116 compounds) and nearly uniform performance across the five anions evaluated [oxides (92% accuracy), fluorides (92%), chlorides (90%), bromides (93%), and iodides (91%)] is achieved with τ (Fig. 2B, fig. S1, and table S1). Like t, the prediction of perovskite stability using τ requires only the chemical composition, allowing the tolerance factor to be agnostic to the many structures that are considered perovskite. In addition to predicting if a material is stable as perovskite, τ also provides a monotonic estimate of the probability that a material is stable in the perovskite structure. The accurate and probabilistic nature of τ, as well as its generalizability over a broad range of single and double perovskites, allows new physical insights into the stability of the perovskite structure and the prediction of thousands of new double perovskite oxides and halides, 23,314 of which are provided here and ranked by their probability of being stable in the perovskite structure. RESULTS AND DISCUSSION Finding an improved tolerance factor to predict perovskite stability One key aspect of the performance of t is how well the sum of ionic radii estimates the interatomic bond distances for a given structure. Shannon’s revised effective ionic radii (20) based on a systematic empirical assessment of interatomic distances in nearly 1000 compounds are the typical choice for radii because they provide ionic radius as a function of ion, oxidation state, and coordination number for the majority of elements. Most efforts to improve t have focused on refining the input radii (17, 19, 21, 22) or increasing the dimensionality of the descriptor through two-dimensional (2D) structure maps (18, 23, 24) or high-dimensional machine-learned models (25–27). However, all hitherto applied approaches for improving the Goldschmidt tolerance factor are only