High-performance bifunctional porous non-noble metal phosphide catalyst for overall water splitting.

Yu F, Zhou H, Huang Y, Sun J, Qin F, Bao J, Goddard WA, Chen S, Ren Z. · 2018

Read High-performance bifunctional porous non-noble metal phosphide catalyst for overall water splitting. by Yu F, Zhou H, Huang Y, Sun J, Qin F, Bao J, Goddard WA, Chen S, Ren Z. (2018) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc6026163.txt.

Introduction

Yu and co-authors report a low-cost catalyst for splitting water. Their research article appeared in Nature Communications. Splitting water makes hydrogen, a clean fuel. The reaction needs catalysts for both halves. Noble metal catalysts work well but cost too much.

The catalyst mixes iron and nickel phosphides on nickel foam. It contains no precious metals at all. It drove overall splitting at 1.42 volts. That beat a paired platinum and iridium oxide setup. It also delivered high current for 40 hours without decay. The authors report activity among the best known then. Readers get a design with real promise for large-scale use. Cheap hydrogen storage could help wind and solar power.

Catalog record

CREATORYu F, Zhou H, Huang Y, Sun J, Qin F, Bao J, Goddard WA, Chen S, Ren Z.
YEAR2018
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC6026163

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

High-performance bifunctional porous non-noble metal phosphide catalyst for overall water splitting By Fang Yu, Haiqing Zhou, Yufeng Huang, Jingying Sun, Fan Qin, Jiming Bao, William A. Goddard, Shuo Chen, Zhifeng Ren Published in: Nature Communications DOI: 10.1038/s41467-018-04746-z ABSTRACT Water electrolysis is an advanced energy conversion technology to produce hydrogen as a clean and sustainable chemical fuel, which potentially stores the abundant but intermittent renewable energy sources scalably. Since the overall water splitting is an uphill reaction in low efficiency, innovative breakthroughs are desirable to greatly improve the efficiency by rationally designing non-precious metal-based robust bifunctional catalysts for promoting both the cathodic hydrogen evolution and anodic oxygen evolution reactions. We report a hybrid catalyst constructed by iron and dinickel phosphides on nickel foams that drives both the hydrogen and oxygen evolution reactions well in base, and thus substantially expedites overall water splitting at 10 mA cm−2 with 1.42 V, which outperforms the integrated iridium (IV) oxide and platinum couple (1.57 V), and are among the best activities currently. Especially, it delivers 500 mA cm−2 at 1.72 V without decay even after the durability test for 40 h, providing great potential for large-scale applications. INTRODUCTION The scalable storage of such abundant renewable energy sources as wind or solar energy is required to mitigate the aggravated global energy crisis while addressing the environmental issues1. Converting solar- or wind-derived electricity to hydrogen fuel via water electrolysis is an appealing means to accomplish this energy conversion and storage technology2–6. At present, there are mainly two commercialized water electrolysis including alkaline and proton exchange membrane (PEM) water electrolysis. PEM water electrolysis has high energy efficiency with high hydrogen production rate, but requires noble metal platinum (Pt) or iridium (Ir)-based catalysts7,8, making it unfavorable due to high cost and scarcity. The alternative, low-cost alkaline water electrolysis, is a mature technology for large-scale hydrogen production that is low-cost due to compatibility with non-noble catalysts, but it suffers from low production rates9,10. One of its grand challenges remains to the huge energy penalty caused by the uphill reaction kinetics of the catalysts that requires significantly high cell voltages (1.8–2.4 V, far larger than the thermodynamic value of 1.23 V) to catalyze the reaction with electrolysis currents of 200–400 mA cm−2, resulting in the production of less than 5% hydrogen by means of water electrolysis in the worldwide industry10–12. Therefore, it is urgent to rationally develop exceptionally efficient non-noble catalysts for expediting overall water splitting toward large-scale commercialization at high current densities with low cell voltages. Currently, there exist some intriguing bifunctional catalysts to negotiate the overall water splitting efficiently in alkaline electrolytes, including transition-metal oxides (e.g., MoO2, NiCoO4)13–15, layered double hydroxides (LDH) (e.g., NiFe LDHs)2,16, sulfides (e.g., NiCo2S4, MoS2/Ni3S2)17,18, selenides (e.g., NiSe)19, and phosphides (e.g., CoP2/reduced graphene oxide, Ni5P4)20,21. Unfortunately, most of them can operate only steadily at low current density (<20 mA cm−2), not to mention their low energy conversion efficiency at above 200 mA cm−2 required for commercial applications. These catalysts are far from being optimized for industrial scales10,22 probably arisen from the difficulty in integrating both the merits of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalysts in a single bifunctional catalyst in the same electrolyte (either alkaline or acid). In this regard, constructing a single bifunctional catalyst with outstanding HER and OER activities simultaneously in the same electrolyte is urgently needed. We report here, just such a cost-effective catalyst that we discover using the straightforward strategy of hybridizing two metallic iron and dinickel phosphides (FeP/Ni2P) on commercial nickel (Ni) foams. This produces an extremely active bifunctional electrocatalyst for both OER and HER outperforming most of the catalysts with similar function, and also exceptional overall water splitting surpassing commercial alkaline electrolyzers in 1 M KOH. Specifically, we corroborate that our FeP/Ni2P hybrid performs well for HER with catalytic performance (−14 mV to achieve −10 mA cm−2) as good as that of the state-of-the-art noble Pt catalyst (−57 mV), and also for OER with the lowest overpotential (154 mV to afford 10 mA cm−2) reported thus far, substantially outperforming the benchmark IrO2 (281 mV) and other reported robust OER catalysts. Furthermore, inspired by the excellent HER and OER activity, we integrated this bifunctional catalyst directly as both the anode and cathode electrodes in an alkaline electrolyzer, and demonstrate that a cell voltage of only 1.42 V can deliver 10 mA cm−2, and a cell voltage of 1.72 V is required to deliver 500 mA cm−2 with 40 h durability, far surpassing the performance of current industrial catalysts, which require 2.40 V for 400 mA cm−2. RESULTS Electrocatalyst preparation and characterization Our Fe–Ni–P hybrid architecture was prepared directly on commercial Ni foams by a simple thermal treatment process. Typical scanning electron microscopy (SEM) images show that the as-prepared samples are free-standing with abundant mesopores and/or nanopores at the surface (Fig. 1a and b), indicating efficacious achievement of large surface areas for facile exchange of proton or oxygen-containing intermediates5,23. In particular, numerous nanocrystals are distributed uniformly at the surface, forming plentiful surface active sites in this hybrid catalyst. The selected area electron diffraction pattern (Fig. 1c), combined with high-resolution transmission electron microscopy (TEM) images (Fig. 1d, Supplementary Fig. 1), further reveal the nanoscale features of the FeP and Ni2P particles with diameters of 5–30 nm. The interplanar spacings of these nanoparticles are resolved by TEM to be around 0.204 and 0.502 nm corresponding to the (021) and (010) planes of Ni2P crystals, and 0.181 and 0.193 nm corresponding to the (103) and (220) planes of FeP crystals. To determine the distribution of Ni, Fe, and P elements in the as-prepared samples, elemental mapping was carried out using TEM, confirming the homogenous distribution of Ni, Fe, and P elements in the FeP/Ni2P nanoparticles (Fig. 1e). The energy dispersive X-ray (EDX) spectrum (Supplementary Fig. 2) shows that the Ni, Fe, and P elements are present with an atomic ratio close to 2:1:2, consistent with the high-resolution TEM observations.Fig. 1Synthesis and microscopic characterization of as-prepared FeP/Ni2P hybrid. a Low-magnification SEM images of FeP/Ni2P nanoparticles supported on Ni foam. Scale bar, 5 μm. b High-magnification SEM images of FeP/Ni2P nanoparticles supported on Ni foam. Scale bar, 200 nm. c The SAED pattern taken from the FeP/Ni2P catalysts. Scale bar, 2 1/nm. d A typical HRTEM image taken from the FeP/Ni2P catalysts. Scale bar, 2 nm. e The TEM image and corresponding EDX elemental mapping. Scale bar, 100 nm. f XPS analysis. g A typical XRD pattern of the samples (we did not show the full intensity of the peaks from Ni so that the peaks from the catalysts can be better viewed) The chemical composition and oxidation states of the catalysts were further unveiled by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The P 2p core level spectrum can be fit with two doublets (Fig. 1f), with one located at the binding energies of 129.3 and 130.1 eV attributing to phosphorus anions of metal phosphides, and the other at 133.5 and 134.3 eV indicative of phosphate-like P arisen from possible surface oxidation, as has been observed previously24–26. The XPS spectrum of Fe 2p3/2 core level (Supplementary Fig. 3a) can be deconvoluted into three main peaks with binding energies of 707.0,

Read the complete text