Ionic liquids: a brief history.
Welton T. · 2018
Read Ionic liquids: a brief history. by Welton T. (2018) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5988633.txt.
Introduction
Welton gives a brief history of ionic liquids and how interest in them grew. His article appeared in Biophysical Reviews. Ionic liquids are now a major subject in modern chemistry. Papers in the field run to about 3,500 per year. Welton traces the story from a personal angle. Paul Walden found a salt that melts at 12 degrees Celsius in 1914. That protic ionic liquid went unnoticed for decades.
Later groups cut molten salt melting points for their own ends. Hurley and Weir mixed alkylpyridinium halides with metal salts. The field then grew through green chemistry and electrochemistry. Synthesis, catalysis, and industry uses followed.
Catalog record
| CREATOR | Welton T. |
|---|---|
| YEAR | 2018 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 86 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Ionic liquids: a brief history By Tom Welton Published in: Biophysical Reviews DOI: 10.1007/s12551-018-0419-2 ABSTRACT Abstract There is no doubt that ionic liquids have become a major subject of study for modern chemistry. We have become used to ever more publications in the field each year, although there is some evidence that this is beginning to plateau at approximately 3500 papers each year. They have been the subject of several major reviews and books, dealing with different applications and aspects of their behaviours. In this article, I will show a little of how interest in ionic liquids grew and developed. Keywords: Ionic liquid, Green chemistry, Electrochemistry, Synthesis, Catalysis, Industrial applications, Structure, Dynamics THE BEGINNINGS A brief article such as this cannot cover every aspect of research using ionic liquids and it will inevitably reflect the idiosyncrasies and personal experiences of the author. Even those subjects covered can only receive the briefest mention. If I have left out your contributions to the field, I apologise, no slight is intended. I do attempt to direct the reader to reviews from which they can learn more. Other histories of ionic liquids, with different perspectives, are available in the literature (Wilkes 2002; Angell et al. 2012). Like the selection of a single source from the many tributaries of a great river, picking a single beginning for a research area is somewhat arbitrary. There are several beginnings to the story of ionic liquids in which they were discovered independently. The earliest of these was when Paul Walden was searching for molten salts that were liquid at temperatures at which he could use his equipment without special adaptations. He discovered that [EtNH3][NO3] has a melting point of 12 °C (Walden 1914). This was also the first example of a protic ionic liquid (PIL) (Greaves and Drummond 2008; Greaves and Drummond 2015), which were later to become an important sub-class of ionic liquids after being rediscovered by Hiroyuki Ohno (Hirao et al. 2000); Walden’s interest in these molten salts was the relationship between their molecular size and their conductivity. Unfortunately, apart from a brief mention in a study of the parachor of some fused salts in 1927 (Sugden and Wilkins 1929), the potential of this breakthrough went unnoticed for a long time. Nearly 40 years later, another group independently recognised the potential benefits of lowering the melting points of the molten salts with which they were working. Hurley and Weir were mixing 1-alkylpyridinium halides with ‘true inorganic salts’, such as metal halides (Hurley and Weir 1951) to make solutions from which the metals could be electroplated. During this study, they discovered that the 1-ethylpyridinium bromide-aluminium chloride ([C2py]Br-AlCl3) 2:1 M ratio mixture was liquid at room temperature. They created a phase diagram for this system, containing two eutectics at 1:2 (45 °C) and 2:1 (− 40 °C) molar ratios and a maximum at the 1:1 molar ratio (88 °C), which they attributed to the formation of bromochloroaluminate species in the melt. The electrodeposition of metals remains an important part of ionic liquid research (Zhang and Etzold 2016). The 2:1 molar ratio of [C2py]Br-AlCl3 was later picked up by Bob Osteryoung’s group to study the electrochemistry of two iron(II) diimine complexes, ferrocene and hexamethylbenzene at room temperature (Chum et al. 1975) having noted that this had not been possible in molten Na[AlCl4] (m. pt. 175 °C) due to decomposition of the solutes. However, they did note the drawback of this ionic liquid as being it is only at this composition that it is liquid at room temperature. This drove the group to seek a system that was liquid at room temperature over a wider range of compositions, namely 1-butylpyridinium chloride-aluminium chloride ([C4py]-AlCl3) (Robinson and Osteryoung 1979) which they used to study solute electrochemistry and later characterised using Raman spectroscopy (Gale et al. 1978). In a separate tributary, other low-melting systems with organic cations were being used. George Parshall used [Et4N][GeCl3] (m. pt. 68 °C) and [Et4N][SnCl3] (m. pt. 78 °C) as solvents for platinum catalysed hydrogenation reactions (Parshall 1972). While he did not continue with this work, he did inspire John Yoke to return to a previous observation (Yoke et al. 1963) that [Et3NH][CuCl2] was an ‘oil’ (a word often used by inorganic and organometallic chemists when something that they expected to be a solid was not) at room temperature to investigate a number of ammonium and phosphonium chlorocuprate systems (Axtel et al. 1973). In another series of papers, Warren Ford explored molten tetraalkylammonium tetraalkylborides (Ford et al. 1973) particularly triethylhexylammonium triethylhexylboride, which had the lowest viscosity of these. With remarkable prescience for future interest in ionic liquids, this included the study of their effects on the rates of organic reactions (Ford et al. 1974) and their toxicity and antimicrobial activity (Rosenthal et al. 1975). Analysis of the references cited in the papers of those working with chloroaluminate ionic liquids and those working on the other systems suggests that these different groups were unaware of each other’s work. This had a number of contributing factors. Those working with the different systems had very different backgrounds and interests; those working on the chloroaluminate systems were mostly electrochemists, while those working with other systems were more concerned with synthesis and catalysis. Also, these systems had not yet been recognised to be part of a unified concept. Finally, in those days before electronic searching of the literature, searches that we now complete in a few minutes would have taken several days of work. The first confluence of these steams of work was in Chuck Hussey’s seminal 1983 review article on Room Temperature Molten Salt Systems (Hussey 1983). In this review, we can see that it was the chloroaluminate systems that had attracted on-going interest, with most work focussed on structures, halogenoaluminate equilibria and physical properties and electrochemistry of the ionic liquids and their solutions. This had been maintained by a handful of enthusiasts and their sponsors, who also worked on more well-established higher temperature systems. The chloroaluminate systems were extremely difficult to handle due to their severe sensitivity to water, which required special equipment such as an inert-atmosphere glove box and created a barrier to entry into this part of field. THE END OF THE BEGINNING In the 1980s, interest in ionic liquids began to slowly spread, with new researchers, such as Ken Seddon and myself, who had not previously worked with high temperature molten salts coming into the field. Also, the range of investigations began to broaden. [EtNH3][NO3] reappeared in the literature in 1981, in a short note by Evans et al. about the thermodynamics of its solutions of krypton, methane, ethane, and n-butane and particularly “hydrophobic bonding” (Evans et al. 1981). It is interesting to see that in this paper, the authors noted that [EtNH3][NO3] had the potential to be used as a non-aqueous solvent for biochemical systems and the importance of its network of hydrogen bonds in controlling its solvent properties. This group went on to study the activity of alkaline phosphatase in water-[EtNH3][NO3] mixtures and found that at lower concentrations, [EtNH3][NO3] had a beneficial effect on the enzyme’s activity but that at 80% [EtNH3][NO3] (v/v), it was inactive (Magnuson et al. 1984). Colin Poole picked up on this