Ultrafast laser processing of materials: from science to industry.
Malinauskas M, Žukauskas A, Hasegawa S, Hayasaki Y, Mizeikis V, Buividas R, Juodkazis S. · 2016
Read Ultrafast laser processing of materials: from science to industry. by Malinauskas M, Žukauskas A, Hasegawa S, Hayasaki Y, Mizeikis V, Buividas R, Juodkazis S. (2016) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5987357.txt.
Introduction
Malinauskas and co-authors review ultrafast laser processing of materials, from science toward industry. Their review appeared in Light: Science & Applications. Tightly focused femtosecond or picosecond pulses deliver optical energy with fine precision. Two-photon excitation places changes deep inside bulk material. Local edits can be smaller than 100 nanometres. Three-dimensional structuring is almost unrestricted with this method.
Pulse length, chirp, and polarization give wide control over changes. Processing speeds now approach metres per second. That pace speeds the move from lab to factory floor. The authors stress the trade-off between resolution and throughput. Biomedical scaffolds and photonic wire bonding show the reach.
Catalog record
| CREATOR | Malinauskas M, Žukauskas A, Hasegawa S, Hayasaki Y, Mizeikis V, Buividas R, Juodkazis S. |
|---|---|
| YEAR | 2016 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 87 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Ultrafast laser processing of materials: from science to industry By Mangirdas Malinauskas, Albertas Žukauskas, Satoshi Hasegawa, Yoshio Hayasaki, Vygantas Mizeikis, Ričardas Buividas, Saulius Juodkazis Published in: Light, Science & Applications DOI: 10.1038/lsa.2016.133 ABSTRACT Abstract Processing of materials by ultrashort laser pulses has evolved significantly over the last decade and is starting to reveal its scientific, technological and industrial potential. In ultrafast laser manufacturing, optical energy of tightly focused femtosecond or picosecond laser pulses can be delivered to precisely defined positions in the bulk of materials via two-/multi-photon excitation on a timescale much faster than thermal energy exchange between photoexcited electrons and lattice ions. Control of photo-ionization and thermal processes with the highest precision, inducing local photomodification in sub-100-nm-sized regions has been achieved. State-of-the-art ultrashort laser processing techniques exploit high 0.1–1 μm spatial resolution and almost unrestricted three-dimensional structuring capability. Adjustable pulse duration, spatiotemporal chirp, phase front tilt and polarization allow control of photomodification via uniquely wide parameter space. Mature opto-electrical/mechanical technologies have enabled laser processing speeds approaching meters-per-second, leading to a fast lab-to-fab transfer. The key aspects and latest achievements are reviewed with an emphasis on the fundamental relation between spatial resolution and total fabrication throughput. Emerging biomedical applications implementing micrometer feature precision over centimeter-scale scaffolds and photonic wire bonding in telecommunications are highlighted. Keywords: biomedical applications, direct laser writing, functional microdevices, material processing, nonlinear light–matter interaction, 3D structuring, ultrashort laser pulses UNIQUENESS OF ULTRAFAST LASER PROCESSING The possibility of three-dimensional (3D) writing in glass1 and polymers2 using tightly focused femtosecond (fs) laser pulses, demonstrated roughly two decades ago, has attracted attention in a wide range of areas related to academic research and engineering. The fabrication of 3D objects with a size comparable to that of a living cell and comprising even finer details3 suggests a realization of remotely controllable 3D micro-bots to perform in vivo healing missions or the creation of all-optical information processors integrated on a single 3D microchip and robust non-erasable optical memory structures. Thus began the race towards these and many other attractive goals. At present, most of those goals have yet to be reached; however, the progress achieved in some areas is significant. Currently, optical memories with data density exceeding ∼1 Tbit cm–3 (Refs. 4, 5), waveguide-based optical information processing structures1, elements of optical quantum computing systems6, 7, 3D photonic crystals (PhC)8 and micro-mechanical/biological systems9, 10 are obtainable using ultrashort laser pulses. Here, we discuss these achievements and outline current trends in the development of laser processing and its applications, which are bound to make ultrashort laser fabrication an indispensable tool for future nanotechnologies. Unrestricted freeform manufacturing in 3D-space on the mesoscale spanning the critical dimensions of 10 nm to 100 μm in feature sizes has been an engineering curiosity over the last 10–15 years. Endless incarnations of micro-copies from real-world items were fabricated in a variety of photo-polymers, recorded in glasses and crystals. This endeavor pushed and explored the limits of novel 3D fabrication and experimented with optimization for a higher throughput and resolution11. The efforts continue to this day and challenge well-established benchmarks in resolution, feature size, precision and efficiency developed over more than 50 years in the microelectronics industry. Comparison of 3D emerging technology with a mature two-dimensional (2D) micro-technology is only partially fair owing to a qualitative difference in the 3D character and the capability of laser manufacturing. Both approaches have fundamental limitations set by the wavelength of fabrication for electrons and photons, respectively. The difference in the relevant wavelengths is revealing: the electron’s de Broglie wavelength at a typical V=50 kV acceleration voltage in electron beam lithography is (nonrelativistic), where h, e, m are the Plank’s constant, electron charge and mass, respectively, whereas the light wavelength λl=5000 Å (a green color) in 3D-laser writing. Lasers entered and now dominate the fields of welding, drilling, cladding and manufacturing with a unique capability of 3D robotic light delivery at a 0.1–10 m scale and pointing stability of ∼1 mm (for example, in the car manufacturing industry) since circa 1980 (Ref. 12). Lasers operating at 1 or 10 μm wavelengths and at long pulse or continuous-wave (cw) mode are practical and useful, yet unsuitable for fabrication tasks at scales smaller than 1 mm. Thus, they are presently challenged in precision and resolution by reliable ultrashort pulsed lasers. A double innovation in (i) the development of new materials and (ii) laser sources that are better suited for 3D micro-printing was required for the continued progress of laser fabrication and the long-praised resolution of fabrication not being the driving factor. Now, with the emergence of a new generation of reliable fs-lasers, a set of new materials and backing by science of light–matter interaction at the nanoscale with cross-sections smaller than 100 nm, miniaturization of 3D-laser fabrication is advancing and innovating. To demonstrate the versatility and potential of the new technology, 3D inscription, additive manufacturing and surface texturation techniques are shown to reach the high throughput required for industry. A selected few representative examples illustrate the capabilities and truly unique features of fs-laser fabrication. IS FABRICATION USING ULTRAFAST LASERS A FUTURE TECHNOLOGY? Industrial challenges Manufacturing has its own conservative pace of development and justification of new investments. Considerable innovation that brings a new quality to the product simultaneously with higher productivity is always required for the next cycle of technological renovation, which occurs on a 7–10-year-modernization cycle on a factory floor. In manufacturing with lasers, their acquisition and maintenance costs, reliability and longevity were always the main driving forces for industrial installations. The innovation that an ultrashort pulsed laser can bring to manufacturing is discussed next from the perspective of unique control over the light–matter interaction when ultrashort laser pulses are used and in view of the practical requirements of high productivity. The additive manufacturing, cutting and welding with CO2, YAG and fiber lasers that operate at 10 or 1 μm wavelengths with a cw or pulsed-mode operation are already powering the automotive, construction and marking industries12. The feed speeds of a workpiece are ∼10 cm min–1 (∼1 mm s–1 or in specific cases even higher) for marking and welding applications realized with lasers with an average power of ∼0.1–1 kW. The target industrial macro-fabrication speed is ∼10 cm min–1 for a linear scan, including turning points, which can already be demonstrated in fs-laser micro-fabrication13, 14 with a recent record in waveguide writing speed of 200 mm s–1 (Ref. 15) on the screen of a mobile phone inside Gorilla glass. Another efficient and confined light delivery is a filament16 self-formed in water, which can assist in uniform energy delivery along the beam propagation direction17. This helps laser fabrication of curved surfaces where tight focusing would require axial position adjustments for precise matching of the focal region and the sample’s surface18. The principle of this approach is depicted in Figure 1. The formed filament can have a high aspect ratio (length to width) and experimentally realized more than 2 mm in length and just tens of micrometers in diameter13. When a laser raster scan or multi-line exposure mode is used for a fill exposure of 3D volume of a workpiece/pattern, the fabrication time quickly increases to hours for an object with 3D cross-sections of ∼1 in. [Figure: