Short-chain perfluoroalkyl acids: environmental concerns and a regulatory strategy under REACH.
Brendel S, Fetter É, Staude C, Vierke L, Biegel-Engler A. · 2018
Read Short-chain perfluoroalkyl acids: environmental concerns and a regulatory strategy under REACH. by Brendel S, Fetter É, Staude C, Vierke L, Biegel-Engler A. (2018) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5834591.txt.
Introduction
Brendel and co-authors argue that short-chain PFAS chemicals need tighter European control. Their analysis appeared in Environmental Sciences Europe. Industry swapped to these short-chain compounds as long-chain cousins faced bans. The replacements were assumed to build up less in bodies.
The authors show a different danger profile. Short-chain PFASs move fast through soil and water. Their breakdown products barely degrade at all. Drinking water picks them up, and treatment plants cannot strip them out. Exposure thus becomes permanent and hard to reverse. The paper urges listing them as substances of very high concern under REACH, then restricting them.
Catalog record
| CREATOR | Brendel S, Fetter É, Staude C, Vierke L, Biegel-Engler A. |
|---|---|
| YEAR | 2018 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 49 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Short-chain perfluoroalkyl acids: environmental concerns and a regulatory strategy under REACH By Stephan Brendel, Éva Fetter, Claudia Staude, Lena Vierke, Annegret Biegel-Engler Published in: Environmental Sciences Europe DOI: 10.1186/s12302-018-0134-4 ABSTRACT Background Short-chain PFASs (per- and polyfluoroalkyl substances) are widely used as alternatives to long-chain PFASs. Long-chain PFASs become gradually regulated under REACH (EC No. 1907/2006) and other international regulations, due to having persistent, bioaccumulative and toxic properties and/or being toxic for reproduction. The increasingly used short-chain PFASs are assumed to have a lower bioaccumulation potential. Nonetheless, they have other properties of concern and are already widely distributed in the environment, also in remote regions. The REACH Regulation does not directly address these emerging properties of concern, complicating the implementation of regulatory measures. Therefore, this study illustrates these environmental concerns and provides a strategy for a regulation of short-chain PFASs within REACH. Results Short-chain PFASs have a high mobility in soil and water, and final degradation products are extremely persistent. This results in a fast distribution to water resources, and consequently, also to a contamination of drinking water resources. Once emitted, short-chain PFASs remain in the environment. A lack of appropriate water treatment technologies results in everlasting background concentrations in the environment, and thus, organisms are permanently and poorly reversibly exposed. Considering such permanent exposure, it is very difficult to estimate long-term adverse effects in organisms. Short-chain PFASs enrich in edible parts of plants and the accumulation in food chains is unknown. Regarding these concerns and uncertainties, especially with respect to the precautionary principle, short-chain PFASs are of equivalent concern to PBT substances. Therefore, they should be identified as substances of very high concern (SVHC) under REACH. The SVHC identification should be followed by a restriction under REACH, which is the most efficient way to minimize the environmental and human exposure of short-chain PFASs in the European Union. Conclusion Due to an increasing use of short-chain PFASs, an effective regulation is urgently needed. The concerns of short-chain PFASs do not match the “classical” concerns as defined under REACH, but are not of minor concern. Therefore, it is of advantage to clearly define the concerns of short-chain PFASs. This might facilitate the following restriction process under REACH. BACKGROUND Some representatives of per- and polyfluoroalkyl substances (PFASs) are highly stable organic compounds, due to the C–F bond being one of the strongest in organic chemistry [1]. Compared to hydrocarbons, PFASs have enhanced technical properties, such as a higher surface activity and better dielectric properties, and possess at the same time a higher thermal stability, an increased chemical resistance and a physiological inertness [2]. Due to these properties, PFASs are well suited for manifold applications and have been used extensively in various industrial and consumer applications since the 1950s, e.g., impregnation of textiles, paper, hard metal plating, in paints, the production of fluoropolymers, etc. [3, 4]. During the production and life cycle of the products, a certain fraction of PFASs is inevitably emitted into the environment (e.g., [5]). Many commonly used PFASs can degrade under environmentally relevant conditions to perfluoroalkyl acids (PFAAs), regarded as final degradation products (e.g., [6]). Besides the direct emission of PFAAs, e.g., from production and life cycle of certain fluoropolymers, indirect emissions via degradation of the precursor substances are of high relevance regarding the global emissions [7]. Also, side-chain fluorinated polymers, in particular the group of side-chain fluorotelomer-based polymers, were shown to be degraded to PFAAs under environmental conditions in the range of decades to centuries [8] and are therefore considered to be precursors. As highly persistent final degradation products of many other PFASs, PFAAs are a relevant group regarding environmental and human exposure, even though being a small substance group within the whole PFASs group, consisting of at least 3000 substances [9]. The concern of possible risks of PFAAs to the environment and human health was broadly unrecognized until the turn of the millennium, when two groups of PFAAs, long-chain perfluoroalkyl carboxylic acids and long-chain perfluoroalkane sulfonic acids, have been shown to be ubiquitously present in biota and humans (e.g., [10, 11]). Since becoming aware of the ubiquitous distribution and the hazardous properties (see [12]) of long-chain PFASs (i.e., long-chain PFAAs and their precursors), voluntary measures of manufacturers and regulatory action have been taken place to reduce the emissions. Perfluorooctane sulfonic acid (PFOS), its salts and perfluorooctane sulfonyl fluoride (PFOSF) are listed as persistent organic pollutant (POP) under the Stockholm Convention and perfluorooctanoic acid (PFOA) and related precursors are proposed as POP. Under the European Chemicals Regulation (REACH EC No. 1907/2006), several long-chain perfluoroalkyl carboxylic acids (C8–C14) and the long-chain perfluorohexane sulfonic acid are identified as substances of very high concern (SVHC) and included in the REACH candidate list. In the EU restriction, proposals for the perfluoroalkyl carboxylic acids on the candidate list are in progress, but only implemented for PFOA its salts and related substances up to the present. In summary, global measures to ban long-chain PFAAs of concern are ongoing and need to be continued. With the regulation of long-chain PFASs and due to voluntary measures, non-regulated PFASs have been more extensively used as alternatives. Information of these replacements are not easily accessible, however, it is known that short-chain PFASs (i.e., short-chain PFAAs and respective precursors, see Fig. 1 for terminology) are important and broadly used alternatives [13]. Due to historical emissions mainly as unintended by-products during the manufacturing of long chain PFASs in the past, short-chain PFASs are already present in environmental compartments [7, 14]. The replacement of long-chain PFASs with short-chain PFASs and in general other PFASs is highly criticized [15–17], as short-chain PFASs have also relevant properties of concern.Fig. 1Terminology of per- and polyfluoroalkyl substances Long- and short-chain PFAAs were originally distinguished, since short-chain PFAAs are assumed to have a lower bioaccumulation potential and improved environmental properties compared to long-chain PFAAs [3, 18]. However, short-chain PFAAs are as persistent as long-chain PFAAs have different, but not less alarming properties of concern, and are already widely distributed in the environment [e.g., 19–27]. The awareness of these concerns needs to be raised to obtain a fast regulation of short-chain PFASs. Therefore, this study (i) summarizes and highlights the concerns of short-chain PFAAs, (ii) investigates the need for a regulation and (iii) provides a strategy for how a regulation could be implemented in REACH. RESULTS AND DISCUSSION Uses and sources of environmental exposure According to the publicly available information on REACH registrations, short-chain PFAAs, e.g., PFBA (perfluorobutanoic acid), PFBS (perfluorobutanesulfonic acid) and PFHxA (perfluorohexanoic acid) have not been registered so far. The last registration deadline under REACH for substances which are manufactured or imported between one and 100 tons per year is 31 May 2018. However, registration obligations do not include substances in imported articles. In contrast to the short-chain PFAAs, various short-chain precursor substances are registered in high tonnages (> 100 tons per annum) and are mainly used for manufacturing polymers. Those polymers may most likely have wide dispersive uses. In general, short-chain PFASs can substitute long-chain PFASs in manifold applications [28]. Therefore, they are used comparably to long-chain PFASs in many consumer products and industrial applications requiring inert or repellent characteristics. Due to a partially limited technical performance in comparison with long-chain PFASs, higher amounts