Electrocatalysts for Hydrogen Evolution in Alkaline Electrolytes: Mechanisms, Challenges, and Prospective Solutions.

Mahmood N, Yao Y, Zhang JW, Pan L, Zhang X, Zou JJ. · 2018

Read Electrocatalysts for Hydrogen Evolution in Alkaline Electrolytes: Mechanisms, Challenges, and Prospective Solutions. by Mahmood N, Yao Y, Zhang JW, Pan L, Zhang X, Zou JJ. (2018) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5827647.txt.

Introduction

Mahmood and co-authors review catalysts for making hydrogen in alkaline water. Splitting water yields hydrogen, a clean fuel. In alkaline baths the key reaction crawls. An extra water-breaking step slows it down.

Catalysts that shine in acid lose much of their power in alkali. The review lays out what a good alkaline catalyst must do. It then surveys new materials built from carbon and metals. Shaped nanostructures and tuned surfaces speed the reaction. Mixed structures reveal how parts work together. The authors close with design paths for better efficiency. Readers get the state of a bottleneck in green fuel.

Catalog record

CREATORMahmood N, Yao Y, Zhang JW, Pan L, Zhang X, Zou JJ.
YEAR2018
COLLECTIONPAPERS
FORMATTXT
FILE SIZE102 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC5827647

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Electrocatalysts for Hydrogen Evolution in Alkaline Electrolytes: Mechanisms, Challenges, and Prospective Solutions By Nasir Mahmood, Yunduo Yao, Jing‐Wen Zhang, Lun Pan, Xiangwen Zhang, Ji‐Jun Zou Published in: Advanced Science DOI: 10.1002/advs.201700464 ABSTRACT Abstract Hydrogen evolution reaction (HER) in alkaline medium is currently a point of focus for sustainable development of hydrogen as an alternative clean fuel for various energy systems, but suffers from sluggish reaction kinetics due to additional water dissociation step. So, the state‐of‐the‐art catalysts performing well in acidic media lose considerable catalytic performance in alkaline media. This review summarizes the recent developments to overcome the kinetics issues of alkaline HER, synthesis of materials with modified morphologies, and electronic structures to tune the active sites and their applications as efficient catalysts for HER. It first explains the fundamentals and electrochemistry of HER and then outlines the requirements for an efficient and stable catalyst in alkaline medium. The challenges with alkaline HER and limitation with the electrocatalysts along with prospective solutions are then highlighted. It further describes the synthesis methods of advanced nanostructures based on carbon, noble, and inexpensive metals and their heterogeneous structures. These heterogeneous structures provide some ideal systems for analyzing the role of structure and synergy on alkaline HER catalysis. At the end, it provides the concluding remarks and future perspectives that can be helpful for tuning the catalysts active‐sites with improved electrochemical efficiencies in future. INTRODUCTION Hydrogen has been referred as fuel of future with water as an oxidation product, no carbon and higher enthalpy of combustion than any other chemical fuel.1, 2, 3 Although extensive research has been carried out to produce the hydrogen fuel, still sustainable production of hydrogen is a great challenge.4 At present about 44.5 million tons of hydrogen is produced worldwide from various sources, e.g., steam methane reforming, coal gasification, and water electrolysis. The former two produce 96% while the later one produce only 4% of total hydrogen, which is mainly used for industrial applications, i.e., oil reforming and ammonia production for fertilizer.5, 6 The production of hydrogen through hydrocarbon cracking results in impure gas and toxic effluents to environment that severely affect the climate.7 The hydrogen production through electrocatalytic water splitting has been proved as an alternative clean and sustainable fuel to finite fossil fuels.8, 9, 10 However, construction of specified infrastructure for the storage and delivery of hydrogen poses a significant challenge in the hydrogen highways. The deployment of “Plug and Play” electrolyzer makes the market‐driven installations of refueling stations possible, but the use of highly acidic proton exchange membrane (PEM) systems increase its cost and stability concerns.11, 12 Moreover, these systems use platinum group metals (PGMs) based catalysts for hydrogen evolution reaction (HER, one of the most fundamental reaction for hydrogen production), and operate under highly corrosive conditions (strong acids) which further increases the cost and safety concerns of overall setup.13 Therefore, development of alternative catalysts and reaction medium is dire need of time to fulfill the demands of future energy.14, 15 The HER setup under alkaline conditions present an attractive substitution that not only increase the stability of PGMs‐based water electrolyzer but also open the possibility of hunting transition metal based catalysts. However, the decreased hydrogen kinetics is a great challenge associated with alkaline‐HER technology.16, 17 The adsorption energy of the catalysts constitutes a key parameter in determining the conversion efficiency and stability in an electrolyte solution. A moderate adsorption energies for water and hydrogen on the active sites with low attraction to hydroxyl ions is required to proceed the reaction in alkaline medium at lower overpotentials, better efficiencies and stability.18 The theoretical studies have shown that the activity trends in acidic medium are concluded on the basis of hydrogen adsorption (Had) at active sites but in alkaline mediums it is controlled by the delicate balance among three important descriptors; (i) the Had on the surface of catalyst, (ii) the prevention from hydroxyl adsorption (OHad) referred as poisoning of active sites, and (iii) the energy requires to dissociate water molecules.18, 19, 20, 21 To confirm the importance of third descriptor, Markovic and co‐workers carried out a series of experiments by modifying the surface of metal with water dissociation catalyst such as Ni(OH)2, where Ni(OH)2 enhanced the dissociation of water molecules to produce H atoms which can then be collected by the metal active centers and recombined into hydrogen.22 Thus, to overcome this additional energy and faster the reaction kinetics, new electrocatalyst that have the ability to dissociate water molecules and moderate affinity for Had as well as its recombination to yield hydrogen gas need to be developed.11, 23, 24, 25 Unfortunately, till now only PGMs have shown considerable affinity to catalyze water in alkaline medium at moderate overpotentials, while that of transition metals (TMs) need high overpotentials.26, 27 Therefore, to‐date, the PGMs‐based catalysts have been predominantly used to generate H2 from alkaline water at industrial scale.28, 29 However, to find alternative HER catalysts to produce hydrogen from electrocatalytic water splitting on global scale in alkaline medium, a world‐wide aggressive research has been undertaken recently. A range of catalysts have been investigated from micro‐ to nano‐ and solo‐ to heterostructured based on earth abundant metals, such as heteroatom‐doped carbon and TMs‐based oxides, sulfides, phosphides, sulfophosphides, and their alloys.30, 31, 32, 33, 34, 35 However, catalyst optimizations are facing great difficulties in characterizing, identifying, and controlling the active sites where catalysis occurs.36 Besides the activity and active sites issues, the stability of the catalysts constitutes another concern for earth‐abundant catalysts. For instance, the nonprecious metal catalysts can undergo segregation due to metal dissolution as well as change in surface chemistry due to varying composition.37 Thus, the development of integrated electrocatalysts for alkaline HER are highly required to overcome the issue of poor reaction kinetics and stability. These issues can be resolved by tuning the surface chemistry by modifying the electronic structure, composition, morphology and porosity/active surface area. On the other hand molecular complexes based on porphyrin and corrole architectures, such as nickel porphyrins, copper corroles, etc. have also shown their possible use.38, 39, 40, 41, 42 It is worth mentioning that recently designed Co corrole complex 5,15‐bis‐(pentafluorophenyl)‐10‐(4)‐(1‐pyrenyl)phenyl containing a triphenylphosphine axial ligand by Cao and co‐workers is the first example of a molecular HER catalyst that is active and stable in a wide pH range (0–14).43 Currently a plenty of catalysts have been developed that have comparable or even better catalytic activity than the benchmark PGMs‐based catalysts.44 Recently, it is also found that few catalysts have ability to perform better in alkaline medium than the acidic one, e.g., Hu and co‐workers prepared NiCo2Px as an active catalyst that can achieve current density of 10 mA cm−2 at 58 and 104 mV in alkaline and acidic mediums, respectively, where Ni modified the Co electronic atmosphere.45 Thus, demonstrates that if we could effectively play with the catalyst electronic structure, morphology and composition, it is possible to achieve the HER catalysis in alkaline medium with same pace as in acidic medium, which is also one motivational demand to us in reviewing this research area. Although several good review articles have been published on acidic or/and wide pH HER catalysis, however, a comprehensive review on HER catalysis in alkaline environment is still missing

Read the complete text