Catalytic Effects in Lithium-Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect.

Liu D, Zhang C, Zhou G, Lv W, Ling G, Zhi L, Yang QH. · 2018

Read Catalytic Effects in Lithium-Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect. by Liu D, Zhang C, Zhou G, Lv W, Ling G, Zhi L, Yang QH. (2018) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5770674.txt.

Introduction

Liu and co-authors review catalytic tricks for lithium-sulfur batteries. These batteries promise cheap, dense energy storage. Their weak point is the shuttle effect, where sulfur compounds drift between electrodes. The drift cuts cycle life and wastes sulfur. Trapping the compounds helps only so far.

The review covers catalysts that speed the compounds' conversion back into solid forms. Noble metals, metal oxides, sulfides, and nitrides all get a look. Metal free options are covered too. The authors weigh cathode and interlayer designs that use these catalysts. Open challenges and fixes for real cells close the review.

Catalog record

CREATORLiu D, Zhang C, Zhou G, Lv W, Ling G, Zhi L, Yang QH.
YEAR2018
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC5770674

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Catalytic Effects in Lithium–Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect By Donghai Liu, Chen Zhang, Guangmin Zhou, Wei Lv, Guowei Ling, Linjie Zhi, Quan‐Hong Yang Published in: Advanced Science DOI: 10.1002/advs.201700270 ABSTRACT Abstract Lithium–sulfur (Li–S) battery has emerged as one of the most promising next‐generation energy‐storage systems. However, the shuttle effect greatly reduces the battery cycle life and sulfur utilization, which is great deterrent to its practical use. This paper reviews the tremendous efforts that are made to find a remedy for this problem, mostly through physical or chemical confinement of the lithium polysulfides (LiPSs). Intrinsically, this “confinement” has a relatively limited effect on improving the battery performance because in most cases, the LiPSs are “passively” blocked and cannot be reused. Thus, this strategy becomes less effective with a high sulfur loading and ultralong cycling. A more “positive” method that not only traps but also increases the subsequent conversion of LiPSs back to lithium sulfides is urgently needed to fundamentally solve the shuttle effect. Here, recent advances on catalytic effects in increasing the rate of conversion of soluble long‐chain LiPSs to insoluble short‐chain Li2S2/Li2S, and vice versa, are reviewed, and the roles of noble metals, metal oxides, metal sulfides, metal nitrides, and some metal‐free materials in this process are highlighted. Challenges and potential solutions for the design of catalytic cathodes and interlayers in Li–S battery are discussed in detail. INTRODUCTION Among the state‐of‐the‐art energy storage devices, the lithium–sulfur (Li–S) battery is a promising candidate for next‐generation batteries because of its high theoretical energy density (≈2600 Wh kg−1), and the low cost and environmental friendliness of the sulfur cathode material.1 Despite these advantages, many challenges have to be overcome in its commercialization, such as the poor utilization and huge volume change (80%) of sulfur and its slow reaction kinetics. Highly soluble intermediate lithium polysulfides (LiPSs) are formed during the cycling which are dissolved into the electrolyte and some LiPSs shuttle from the cathode to the anode to form non‐reusable solid Li2S2/Li2S.2, 3 This leads to a continuous loss of active material, passivation of the anode, and low coulombic efficiency, and thus, it is considered to be one of the key issues limiting the practical use of Li–S batteries.4 Many efforts have been made to solve the shuttle effect that is to suppress the diffusion of LiPSs.3, 5, 6 Various carbon materials have been used as the sulfur host and conductive framework in Li–S batteries because of their high conductivity and large surface area.3, 6, 7 However, carbon materials always have a nonpolar surface, which leads to their relatively low affinity for polar LiPSs and does not help restrict LiPS shuttling. Nanostructured inorganic compounds including transition‐metal oxides, sulfides, and carbides have a strong chemical affinity with LiPSs and block the diffusion of LiPSs more efficiently.8, 9 However, the shuttle effect has not really been well investigated because physical or chemical adsorption only addresses the superficial problem and not the root. The theoretical capacity of an Li–S battery is mostly due to the transformation of soluble long‐chain LiPSs to insoluble low‐chain Li2S2/Li2S.10 The soluble LiPSs formed are easily dissolved in the electrolyte, thus losing electric contact with the electrode surface. This greatly decreases the reaction kinetics of the transformation of LiPSs to insoluble Li2S2/Li2S, and even worse, leads to their nonuniform deposition on the electrode surface, forming large Li2S2/Li2S particles and losing electric contact with electrode. In addition to their high activation energy, these solid products are hard to be reused during the reactions, resulting in an increase of internal resistance and loss of active material. The accumulation of LiPSs in electrolyte also causes severe shuttling of them to the anode to form non‐reusable solid Li2S2/Li2S. Both of them lead to the irreversible loss of active materials forming the “dead sulfur.” Above discussion clearly shows that the shuttle effect is mainly derived from the following two reasons. One is the LiPS dissolution in electrolyte and the other is the slow transformation of these LiPSs. In most cases, to achieve the high activity of sulfur for reaction, the contact between sulfur and electrolyte is needed and the LiPS dissolution is hard to be avoided. Thus, the most promising way to restrain the shuttling is to promote the LiPS conversion to solid Li2S2/Li2S to decrease their dissolution in electrolyte. Recently, studies have shown that some polar hosts, such as metal oxides,11 metal sulfides,12 metal nitrides,13 and some metal‐free materials, not only possess strong affinity toward LiPSs but also catalytically promote the conversion of LiPSs to Li2S2/Li2S, indicating a promising way to finally suppress the LiPS shuttling. In the reverse reaction, the transformation of insoluble Li2S2/Li2S back to LiPSs needs a large activation energy, which is made worse by their aggregation during their formation process, leading to slow reaction kinetics and low energy efficiency. Moreover, the formed insoluble Li2S2/Li2S has a high electronic resistivity that increases the internal resistance.14 Therefore, increasing the rate of transformation of the captured LiPSs to insoluble Li2S2/Li2S, and vice versa, is key to suppress the LiPS shuttling and developing a practically useable Li–S battery (Figure 1 ). Until now, several studies have shown that the catalytic effect of some polar hosts in Li–S system accelerates the above redox reactions, which is promising in solving the shuttling problem. Here, recent advances on ways to increase the reaction kinetics of an Li–S battery using a designed catalytic process are reviewed, and comments are made on future challenges and prospects for high‐performance material design. [Figure: Illustration of catalytic effects in Li–S batteries for the fast conversion of polysulfides to insoluble Li2S2/Li2S, and vice versa.] CATALYTIC METAL‐BASED HOSTS FOR LI–S BATTERIES In the context of electrochemistry, various metals and metal‐containing compounds are often used to increase the electrochemical reaction rates because of their high catalytic activity. For example, a common electrocatalyst is platinum nanoparticles (NPs) supported on carbon particles.15 The platinum increases the rate of oxygen reduction either to water, or to hydroxide or hydrogen peroxide in a fuel cell. In the Li–S battery, these materials can also be used as LiPSs hosts due to their abundant polar active sites,16 which produce chemical binding of the LiPSs.9 Recently, they have been found to have a catalytic effect to achieve fast and efficient conversion of LiPSs to Li2S2/Li2S, and vice versa, and this is reviewed in this section. Metals Arava and co‐workers investigated the electrocatalytic effect of the noble metal catalyst, Pt, on the redox reaction of LiPSs.17 It has been shown that Pt promotes the redox reaction of LiPSs during the charge/discharge process, but a high surface area host is needed to help adsorb the soluble LiPSs. Thus, they used a graphene host decorated with the Pt catalyst (Figure 2 a),18 and the prepared Pt/graphene hybrid with sulfur delivered a capacity of 1100 mAh g−1 for the initial discharge process that remained at 789 mAh g−1 after 100 cycles (superior to the referenced Ni/graphene, 740 mAh g−1 for the initial discharge process and 580 mAh g−1 after 100 cycles) (Figure 2b). The catalytic effect of Pt on the charge transfer kinetics was revealed by the Tafel results, which showed that the exchange current density of the Pt/graphene was much higher than pristine graphene,

Read the complete text