Non-equilibrium supramolecular polymerization.

Sorrenti A, Leira-Iglesias J, Markvoort AJ, de Greef TFA, Hermans TM. · 2017

Read Non-equilibrium supramolecular polymerization. by Sorrenti A, Leira-Iglesias J, Markvoort AJ, de Greef TFA, Hermans TM. (2017) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5708531.txt.

Introduction

Sorrenti and co-authors review polymerization that runs outside equilibrium. Their tutorial review appeared in Chemical Society Reviews. Supramolecular polymers can sit in four states. How they are prepared decides the state. The authors explain how to tell states apart. Kinetics matter in every state, they stress, not just in one.

Different pathways can yield different structures. The same conditions can hold distinct assemblies, side by side. The preparation protocol selects between them. Kinetic models help untangle this complexity. Living systems use such assembly for key tasks, such as cell membranes and ribosomes. The authors call non-equilibrium work an exciting direction for the field. It may in time yield materials with life-like traits, much like the stuff of life itself.

Catalog record

CREATORSorrenti A, Leira-Iglesias J, Markvoort AJ, de Greef TFA, Hermans TM.
YEAR2017
COLLECTIONPAPERS
FORMATTXT
FILE SIZE67 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC5708531

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Non-equilibrium supramolecular polymerization By Alessandro Sorrenti, Jorge Leira-Iglesias, Albert J. Markvoort, Tom F. A. de Greef, Thomas M. Hermans Published in: Chemical Society Reviews DOI: 10.1039/c7cs00121e ABSTRACT Supramolecular polymers can reside in four distinct thermodynamic states. The preparation protocol and mechanistic insights allow to identify each one of them. Going beyond equilibrium polymerization is an exciting new direction in the field of supramolecular chemistry. Key learning points(1) There are different thermodynamic states in supramolecular polymerization: equilibrium, non-dissipative non-equilibrium, and dissipative non-equilibrium.(2) Supramolecular polymerization kinetics are of key importance in all thermodynamic states, including at equilibrium.(3) Mechanistic insights using kinetic models are needed to fully understand pathway complexity.(4) Control over polymerization kinetics can lead to pathway selection, where different structures are formed depending on the preparation protocol.(5) Distinct supramolecular structures can exist at the same experimental conditions when different assembly pathways are present. INTRODUCTION Molecular self-assembly is centrally important in living systems, where supramolecular structures resulting from the self-assembly of two or more molecular components are used to perform complex functions like translation, replication, signalling and cellular transport. Some remarkable examples are the double-stranded DNA, ribosomes, cell membranes and G-proteins.1 Over the past decades, supramolecular chemists have designed building-blocks that self-assemble into well-defined supramolecular architectures according to the chemical information encoded in their molecular structure.2–5 This has resulted in a plethora of supramolecular systems, many of which have been engineered to respond to a variety of stimuli (e.g. pH, light, ionic strength, etc.). Recently, Fujita and co-workers reported, for example, on a monodisperse sphere formed by the incredible number of 144 self-assembled components (48 palladium ions and 96 bent ligands).6 Supramolecular polymers present a particularly well-studied subclass of structures in supramolecular chemistry, where monomers form one-dimensional aggregates through reversible and highly directional secondary interactions.4,7,8 Their unique mechanical properties and versatility have enabled new applications in supramolecular electronics, and biomedical devices for regenerative medicine.4 Different mechanisms of polymerization, e.g., isodesmic, cooperative, or anti-cooperative (see Section 1), have been described so far, but in general the focus has been on the equilibrium state (#1 in Fig. 1A).7,8 The latter is reached when fully reversible non-covalent interactions are involved, which enable the system to explore different configurations (i.e. walking along the energy landscape), and to find the most stable one, by self-repairing possible defects.5 On the other hand, when strong non-covalent interactions come into play, the self-assembly process is often governed by the kinetics of the system, which may lead to kinetically trapped or metastable states (i.e., non-dissipative non-equilibrium states, #2 or #3 in Fig. 1A), instead of the aggregate state corresponding to thermodynamic equilibrium. In the case of states #2 or #3, the outcome of the aggregation process, for example in terms of nanoscale morphology, becomes strongly dependent on the experimental procedures and preparation protocols, as a result of non-linear phenomena such as nucleation and multiple competitive growth pathways (vide infra). In recent years, the increased insight into kinetics and pathway complexity has provided exquisite control over aggregate morphology and molecular organization. In other words, the desired aggregation pathway can be rationally selected by suitable preparation methodologies, leading to assemblies with different targeted features starting from the same building-blocks (see Section 2). The latter is crucial to develop supramolecular materials with optimized functional properties. [Figure: Identifying the different thermodynamic states in supramolecular self-assembly. (A) Schematic Gibbs free energy landscape. (B) Decision tree to identify the different states shown in (A).] Biological systems use molecular chaperones, not only to aid in protein folding, but also to control the self-assembly of supramolecular polymers such as flagellae (i.e., long filaments that are involved in cell motility).9 The major filament of a bacterial flagella, for example, consists of 20 000 flagellin monomers, which are polymerized at a precisely defined location. Specific export chaperones bind to the flagellin monomers to prevent pre-mature polymerization. In particular, the chaperones help to avoid kinetically trapped aggregates that might form along wrong self-assembly pathways by shielding the monomers from incorrect interactions that may occur on their way to the polymerization site. In artificial supramolecular polymerization, however, chaperones have not been invented yet. In addition, living systems use another class of supramolecular polymers that continuously consume energy to stay in dissipative non-equilibrium states (#4 in Fig. 1A). In this case, the energy provided by a chemical fuel (e.g. guanosine triphosphate GTP for microtubules, and adenosine triphosphate ATP for actin fibers) allows spatiotemporal control over the self-assembly, enabling the cell to perform complex functions such as cell division, motility, and intracellular transport.1 Recently, there is a growing interest among supramolecular chemists for synthetic dissipative systems, although this is still a major challenge and only a few examples have been reported so far.10–13 What we have shown so far is that there are four different thermodynamic states where supramolecular polymerization can take place (#1, #2, #3, and #4, Fig. 1A). However, a clear and universally used definition of these different states is essentially lacking, which can be problematic for new researchers entering the field. Here we provide a simple classification and description of the different states, and how to identify them using a decision tree: • Thermodynamic equilibrium: the system resides in the global minimum of the free energy landscape (state #1 in Fig. 1A). No external energy inputs are required to maintain the system, and on average no changes are observed in time. Note that dissipation, usually in the form of heat release, does occur during the downhill self-assembly process from the monomers to the assembly. Once the equilibrium is reached, however, no further dissipation occurs.14 Equilibrium structures are still dynamic, meaning that the monomers continuously exchange with the solution, and their reversibility is crucial for the system to find and remain in its most stable configuration.5 It has to be stressed that, for a given molecular design (chemical information), the shape of the energy landscape depends on parameters such as temperature, solvent composition and salt concentrations. As a result, the morphology of the most stable aggregate (i.e., the position of the global minimum) can change for different sets of these parameters (see Section 1). Nearby free energy minima—often observed in experiment as polymorphic structures—can also be populated according to the Boltzmann distribution if the activation barrier is low.15 • Non-dissipative non-equilibrium states (kinetically trapped or metastable states): the self-assembled system is confined in a local minimum of the energy landscape (states #2 and #3 in Fig. 1A). Its time evolution depends on the shape of the energy landscape around the minimum, and two situations can be envisaged. If the energy barrier for a pathway leading to the thermodynamic equilibrium is low enough, that is, on the same order of magnitude as kBT (where kB is the Boltzmann constant, and T temperature), the system will slowly relax to a more stable structure. Such a system is in a so-called metastable state (#3 in Fig. 1A). Note that multiple metastable configurations can exist along the pathway to the global minimum. On the other hand, when the energy barrier is much higher than kBT, the system will remain captured in the local minimum for a period much longer than the experimental observation. This state is commonly referred to as a kinetically trapped state (#2 in Fig.

Read the complete text