Wear and Tear of Tyres: A Stealthy Source of Microplastics in the Environment.

Kole PJ, Löhr AJ, Van Belleghem FGAJ, Ragas AMJ. · 2017

Read Wear and Tear of Tyres: A Stealthy Source of Microplastics in the Environment. by Kole PJ, Löhr AJ, Van Belleghem FGAJ, Ragas AMJ. (2017) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5664766.txt.

Introduction

Kole and co-authors present a review in an environmental health journal. It compiles knowledge on tyre wear as a microplastic source. Driving abrades tyres and sheds tiny particles into the environment. Estimates of emission per person vary widely by country. The global average sits near 0.81 kilograms per year. Car tyres dwarf other sources like brake wear.

Tyre particles may form five to ten percent of ocean plastic. In air, they form a small share of fine particulate matter. That share links them to the health burden of air pollution. Particles also enter the food chain, though risks stay unclear. The authors call the source stealthy and under-studied. They urge global action from industry, regulators, and researchers.

Catalog record

CREATORKole PJ, Löhr AJ, Van Belleghem FGAJ, Ragas AMJ.
YEAR2017
COLLECTIONPAPERS
FORMATTXT
FILE SIZE98 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC5664766

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Wear and Tear of Tyres: A Stealthy Source of Microplastics in the Environment By Pieter Jan Kole, Ansje J. Löhr, Frank G. A. J. Van Belleghem, Ad M. J. Ragas, A. Dick Vethaak Published in: International Journal of Environmental Research and Public Health DOI: 10.3390/ijerph14101265 ABSTRACT Wear and tear from tyres significantly contributes to the flow of (micro-)plastics into the environment. This paper compiles the fragmented knowledge on tyre wear and tear characteristics, amounts of particles emitted, pathways in the environment, and the possible effects on humans. The estimated per capita emission ranges from 0.23 to 4.7 kg/year, with a global average of 0.81 kg/year. The emissions from car tyres (100%) are substantially higher than those of other sources of microplastics, e.g., airplane tyres (2%), artificial turf (12–50%), brake wear (8%) and road markings (5%). Emissions and pathways depend on local factors like road type or sewage systems. The relative contribution of tyre wear and tear to the total global amount of plastics ending up in our oceans is estimated to be 5–10%. In air, 3–7% of the particulate matter (PM2.5) is estimated to consist of tyre wear and tear, indicating that it may contribute to the global health burden of air pollution which has been projected by the World Health Organization (WHO) at 3 million deaths in 2012. The wear and tear also enters our food chain, but further research is needed to assess human health risks. It is concluded here that tyre wear and tear is a stealthy source of microplastics in our environment, which can only be addressed effectively if awareness increases, knowledge gaps on quantities and effects are being closed, and creative technical solutions are being sought. This requires a global effort from all stakeholders; consumers, regulators, industry and researchers alike. 1. INTRODUCTION The global production of thermoplastics has grown rapidly since the start of its large-scale production around the 1950s, reaching 322 million tonnes/year in 2015 [1]. The different varieties of polymers produced have unique characteristics when compared to traditional materials, in particular in terms of durability, production costs, weight, strength, flexibility and limited electric conductivity. As a result, plastics are used increasingly in many sectors such as construction, transportation, household goods and packaging. Nowadays, the market of thermoplastics is dominated by four main classes of plastics, being polyethylene (PE; 73 million tonnes in 2010), polyethylene terephthalate (PET; 53 million tonnes in 2010), polypropylene (PP; 50 million tonnes in 2010) and polyvinyl chloride (PVC; 35 million tonnes in 2010) [2]. Besides thermoplastics, rubber is also considered a class of plastic. The 26.9 million tonnes rubber market sells two main classes: natural rubber (12.3 million tonnes in 2016) and synthetic rubber (14.6 million tonnes in 2016) [3]. As a result of the growing production of plastics, their widespread use and the mismanagement of waste, the amount of plastics in the environment is increasing rapidly. It has been estimated that between 4.8 and 12.7 million metric tonnes of plastic ended up in the ocean in the year 2010 [4]. Even on the beaches of remote areas such as Henderson Island, an uninhabited island in the South Pacific, large amounts of plastics have been detected [5]. Pollution of the environment with plastics is recognized as a serious global threat because it can negatively affect human health, aquatic organisms, as well as the economy [2,6,7,8]. Plastics end up in the ocean either as large pieces, macroplastics, microplastics (≤5 mm) or nanoplastics (≤100 nm) [9]. The sources of both macroplastics and microplastics are many and diverse. However, the implications for ecological and human health and the impact on our economy are still unknown. More research is needed to pinpoint these sources in order to enable the identification and implementation of cost-effective measures to reduce plastic pollution sources. In this paper, the whole family of synthetic polymers, including modified natural bio-polymers, are considered to be a potential source of pollution. From an environmental point of view, thermoplastics, thermosets and elastomers all are potential sources of microplastics [9]. Car tyres release wear particles through mechanical abrasion. Several studies have suggested that wear and tear from car tyres is an important source of microplastics in the environment [10,11,12,13]. However, many questions remain. Which factors determine the release of wear and tear from car tyres, and how much is actually being released? What is the fate of these particles, once released into the environment? What impacts do the particles have on human health and on aquatic ecosystems? And, how can the emission of wear and tear from car tyres be reduced effectively? Although some of these issues have been addressed in specific scientific studies, the available knowledge is largely fragmented and often localized. The aim of the present review is to bring together the fragmented knowledge on wear and tear of car tyres emitted into the environment and provide a global assessment of the implications for human health of this emerging source of microplastics. The review: (1) describes the characteristics of the tyre and its wear and tear; (2) summarises the amount released into the environment in different countries; (3) describes the different pathways of the wear and tear into the environment; (4) presents an estimate of the total amount of tyre wear and tear to total emissions of microplastics to the oceans; (5) discusses possible effects on humans, and (6) evaluates mitigation options. The numbers calculated in the present paper are rough estimates and should be considered as such. These numbers have been produced in a first attempt to explore the extent of the problem. 2. EMISSIONS 2.1. Tyres When driving a vehicle, particles are being released into the environment from its tyres. This section summarises the available knowledge on the composition of tyres, the particle generation process and the sizes of the particles generated. 2.1.1. Tyre Composition Tyres were initially only made of natural rubber, often derived from the Brazilian rubber tree (Hevea brasiliensis). Nowadays, a mixture of natural and synthetic rubbers is being used. Synthetic rubbers are polymers made from petroleum. About 1–4% of sulphur is added in order to vulcanise the rubber compounds, transforming them into highly elastic material, in which 1% zinc oxide serves as a catalyst. Furthermore, 22–40% carbon black is added as a filler and to make the tyre UV-resistant. In recent years, carbon is sometimes partially replaced by silica (nanoscale glass balls) [14]. Silica reduces the road resistance but it’s more difficult to form a proper bond to the rubber. In a final stage, oil is added to make the tyre less stiff and to improve its wet grip performance. Traditionally, the oil used is aromatic because of its low price and its compatibility with rubber. The specific gravity of a microplastic influences the floating ability of the particle in water [15]. According to the United States (US) Federal Highway Administration [16], the specific gravity of tyre rubber is approximately 1.15 [16]. Banerjee and colleagues [17] mention a specific gravity of 1.17, while Dumne [18] mentions a specific gravity of 1.18. The average density of ocean waters at the surface is 1.025. 2.1.2. Particle Generation The release of wear and tear from tyres results from the contact between the road surface and the tyre. The amount

Read the complete text