Broadband achromatic optical metasurface devices.
Wang S, Wu PC, Su VC, Lai YC, Hung Chu C, Chen JW, Lu SH, Chen J, Xu B, Kuan CH, Li T, Zhu S, Tsai DP. · 2017
Read Broadband achromatic optical metasurface devices. by Wang S, Wu PC, Su VC, Lai YC, Hung Chu C, Chen JW, Lu SH, Chen J, Xu B, Kuan CH, Li T, Zhu S, Tsai DP. (2017) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5543157.txt.
Introduction
Wang and co-authors present a research article in Nature Communications. Their subject is flat optical devices called metasurfaces. Such devices bend and focus light, but colors usually focus at different points. That color blur is called chromatic aberration.
The team offers a design rule to remove that blur over a wide band. Their test devices work from 1200 to 1680 nanometers. One metalens focused each wavelength on the same plane. Another surface bent wide-band light by the same angle. Efficiency was near 12 percent for the lens. Readers see how full-color flat lenses and imagers could become practical.
Catalog record
| CREATOR | Wang S, Wu PC, Su VC, Lai YC, Hung Chu C, Chen JW, Lu SH, Chen J, Xu B, Kuan CH, Li T, Zhu S, Tsai DP. |
|---|---|
| YEAR | 2017 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 40 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Broadband achromatic optical metasurface devices By Shuming Wang, Pin Chieh Wu, Vin-Cent Su, Yi-Chieh Lai, Cheng Hung Chu, Jia-Wern Chen, Shen-Hung Lu, Ji Chen, Beibei Xu, Chieh-Hsiung Kuan, Tao Li, Shining Zhu Published in: Nature Communications DOI: 10.1038/s41467-017-00166-7 ABSTRACT Among various flat optical devices, metasurfaces have presented their great ability in efficient manipulation of light fields and have been proposed for variety of devices with specific functionalities. However, due to the high phase dispersion of their building blocks, metasurfaces significantly suffer from large chromatic aberration. Here we propose a design principle to realize achromatic metasurface devices which successfully eliminate the chromatic aberration over a continuous wavelength region from 1200 to 1680 nm for circularly-polarized incidences in a reflection scheme. For this proof-of-concept, we demonstrate broadband achromatic metalenses (with the efficiency on the order of ∼12%) which are capable of focusing light with arbitrary wavelength at the same focal plane. A broadband achromatic gradient metasurface is also implemented, which is able to deflect wide-band light by the same angle. Through this approach, various flat achromatic devices that were previously impossible can be realized, which will allow innovation in full-color detection and imaging. INTRODUCTION Wavelength dispersion is a key characteristic of optical materials, which always plays an important role in designing optical components and systems. In most dielectrics like glasses, the index of refraction decreases with the longer wavelength, which is called normal chromatic dispersion1. Utilizing such materials, refractive lenses will perform larger focal lengths and prisms will deflect at a smaller angle for longer wavelength. Such chromatic aberration significantly degrades the performance of full-color optical applications, such as in communication, detection, imaging, displaying etc. Taking the refractive lenses as an example, complete elimination of chromatic aberration at three and four wavelengths is accomplished by integrating several materials arranged into a single component to achieve the same focal length, which are termed as apochromatic and superachromatic lens2, respectively. Although successful, this strategy adds weight, complexity and cost to optical systems, which greatly limits their usage. In contrast to the traditional bulk optical elements, metasurfaces3–6 provide a new perspective on flexibly shaping the electromagnetic field7 by manipulating its phase, amplitude as well as polarization at will via a compact and easy-of-fabrication system. Such promising approaches prove their great features and functionality in a variety of applications, such as nonlinear dynamics8, light beam shaping9–11, highly dimensional holographic images12–15, polarization control and analysis16–18, invisible cloak carpet19 etc. In addition to the compact dimension, the main distinction between metalenses (planar lenses based on metasurfaces) and traditional optical lenses is the integrated functionality that allows the achievement of specific characteristics such as multispectral20, dual-functional21 and off-axis focusing22. Recent works reported the dielectric metasurfaces for metalens with high numerical aperture (NA) and optical planar camera with monochromatic aberrations that are comparable with the commercial products, presenting their potential prospect in real applications23, 24. However, these proposed metasurface devices still exhibit large chromatic aberration, which is mainly attributed to following fundamental properties: the resonant phase dispersion of the building blocks used in metasurfaces, the intrinsic dispersion in used materials, as well as the different phase accumulation through light propagation in free space with various wavelengths. Many works have shown that optical metasurfaces working in a relatively broad wavelength bandwidth can be achieved25–30. However, in these reports the optical performance of resonant elements in the metasurfaces is unchanged in a broad bandwidth and this is insufficient for the suppression of chromatic aberration. Up to now, several pioneering works have realized multi-wavelength achromatic metalenses that are capable of eliminating the chromatic aberration at several discrete wavelengths31–37. Very recently, there has been a successful demonstration of an achromatic metalens which is able to suppress the chromatic effect over a 60-nm bandwidth in the visible38. However, although continuous, the working bandwidth (about 11.4% of the central wavelength) is still not broad enough for practical purposes and there is still lack of an effective design rule for unit elements in achromatic metasurface devices. Therefore, much work remains to be done in order to accomplish a broadband achromatic flat optical component working over a continuous bandwidth because of the abrupt phase change from the resonant unit elements. In this work, we employ the integrated-resonant unit element in metasurfaces with smooth and linear phase dispersion combining with geometric phase to design broadband achromatic flat optical components. For the proof of concept, achromatic converging metalenses and beam deflector with gradient metasurfaces are demonstrated that are valid at will within a broad infrared (IR) bandwidth from wavelength of 1200 to 1680 nm. The broadband achromatic metasurface devices based on our approach greatly innovate a complete class of designs in full-color light manipulation and imaging and push them forward to the practical applications. RESULTS Phase requirement of broadband achromatic metalens As the most basic and important functional element, converging lens plays a crucial role in various optical systems. The typical distribution of phase retardation for a metalens follows:1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varphi \left( {R,\lambda } \right) = - \left[ {2{\rm{\pi }}\left( {\sqrt {{R^2}{\rm{ + }}{f^2}} - f} \right)} \right]\frac{{\rm{1}}}{\lambda }$$\end{document}φR,λ=-2πR2+f2-f1λwhere \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R{\rm{ = }}\sqrt {x_0^2{\rm{ + }}y_0^2} $$\end{document}R=x02+y02 is the distance from arbitrary position (x 0, y 0) on the metalens to the center and f is the focal length. To realize a broadband achromatic metalens (BAML), which is schematically shown in the right side of Fig. 1a, such phase retardation with a fixed focal length is exactly required in a wide range of wavelength. Generally, for the case of working wavelength \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\lambda }} \in \left\{ {{{{\lambda }}_{{\rm{min}}}},\quad {{{\lambda }}_{{\rm{max}}}}} \right\}$$\end{document}λ∈λmin,λmax, with λ min and λ max being the boundaries of the interested wavelength band, the phase in Eq. 1 can be re-written as:2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varphi _{{\rm{Lens}}}}\left( {R,\lambda } \right) = \varphi \left( {R,{\lambda _{{\rm{max}}}}} \right){\rm{ + \Delta }}\varphi \left( {R,\lambda } \right)$$\end{document}φLensR,λ=φR,λmax+ΔφR,λwith3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta \varphi \left( {R,\lambda } \right) = - \left[ {2\pi \left( {\sqrt {{R^2} + {f^2}} - f} \right)} \right]\left( {\frac{1}{\lambda } - \frac{1}{{{\lambda _{{\rm{max}}}}}}} \right)$$\end{document}ΔφR,λ=-2πR2+f2-f1λ-1λmax Fig. 1Achromatic metalens. a Schematic for chromatic (left) and achromatic (right) metalenses. In the case of chromatic metalens, the focal length is changed as the incident wavelength is switched, resulting in a rainbow-like focal line when it is illuminated by a light source with continuously changed wavelength. The focal point will become a single spot for the case of BAML with optimized phase compensation. b Phase profile for a BAML at arbitrary wavelength of λ ∈ {λ min, λ max} The BAML can only be realized once these two key phase characteristics are exactly satisfied simultaneously; therefore, the designed phase of BAML can be accordingly divided into two components. The former part in Eq. 2, φ(R, λ max), is considered as a basic phase profile, which is only related with λ max and is independent to the working wavelength λ. Such phase profile can be acquired by exploiting the geometric phase as the phase modulation in each metalens unit element. The geometric phase, also called Berry phase, is produced from the rotation of the