Ti<sub>3</sub>C<sub>2</sub> MXene co-catalyst on metal sulfide photo-absorbers for enhanced visible-light photocatalytic hydrogen production.

Ran J, Ran J, Gao G, Li FT, Ma TY, Du A, Qiao SZ. · 2017

Read Ti<sub>3</sub>C<sub>2</sub> MXene co-catalyst on metal sulfide photo-absorbers for enhanced visible-light photocatalytic hydrogen production. by Ran J, Ran J, Gao G, Li FT, Ma TY, Du A, Qiao SZ. (2017) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5512649.txt.

Introduction

Ran and co-authors report a materials study in Nature Communications on solar hydrogen making. Splitting water with sunlight could yield clean fuel at scale. The best helper catalysts rely on platinum, which is rare and costly. The team tested a layered material called Ti3C2 MXene instead. Computer modeling guided the design before lab work began.

Tiny MXene particles were joined with cadmium sulfide, a light absorber. The pair produced hydrogen at a very high rate under visible light, they report. Quantum efficiency reached about 40 percent at one test wavelength. The particles also boosted zinc-based absorbers. MXenes may thus anchor cheap, high-performing solar fuel systems.

Catalog record

CREATORRan J, Ran J, Gao G, Li FT, Ma TY, Du A, Qiao SZ.
YEAR2017
COLLECTIONPAPERS
FORMATTXT
FILE SIZE54 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC5512649

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ti3C2 MXene co-catalyst on metal sulfide photo-absorbers for enhanced visible-light photocatalytic hydrogen production By Jingrun Ran, Guoping Gao, Fa-Tang Li, Tian-Yi Ma, Aijun Du, Shi-Zhang Qiao Published in: Nature Communications DOI: 10.1038/ncomms13907 ABSTRACT Abstract Scalable and sustainable solar hydrogen production through photocatalytic water splitting requires highly active and stable earth-abundant co-catalysts to replace expensive and rare platinum. Here we employ density functional theory calculations to direct atomic-level exploration, design and fabrication of a MXene material, Ti3C2 nanoparticles, as a highly efficient co-catalyst. Ti3C2 nanoparticles are rationally integrated with cadmium sulfide via a hydrothermal strategy to induce a super high visible-light photocatalytic hydrogen production activity of 14,342 μmol h−1 g−1 and an apparent quantum efficiency of 40.1% at 420 nm. This high performance arises from the favourable Fermi level position, electrical conductivity and hydrogen evolution capacity of Ti3C2 nanoparticles. Furthermore, Ti3C2 nanoparticles also serve as an efficient co-catalyst on ZnS or ZnxCd1−xS. This work demonstrates the potential of earth-abundant MXene family materials to construct numerous high performance and low-cost photocatalysts/photoelectrodes. The generation of hydrogen (H2) from water using solar energy is regarded as a promising strategy for solving global energy problems1,2,3. Particularly, photocatalytic water splitting by utilizing semiconductor photocatalysts has demonstrated huge potential as a clean, low-cost and sustainable approach for solar H2 production. However, despite tremendous achievement in this area during the past decades1,4,5, it is still a great challenge to develop highly efficient, cost-effective and robust photocatalysts driven by sunlight. In recent years, co-catalysts have shown great success in boosting both the activity and stability of photocatalysts6,7,8,9. Unfortunately, the high price and extreme scarcity of the most active H2 evolution co-catalyst, Pt, restricts the commercialization of current photocatalysts. Therefore, seeking an inexpensive and highly active co-catalyst to replace Pt is of paramount significance for achieving large-scale solar H2 production in the future. To date, although enormous progress has been made in developing earth-abundant co-catalysts, several major problems, arising from the intrinsic properties of current co-catalysts, still exist: (i) lack of abundant surface functionalities to establish strong connection with photocatalysts, for fast interfacial charge transfer and long-term stability; (ii) inefficient electron shuttling within co-catalysts due to their poor semiconducting/insulating conductivity10 or destruction of π-conjugated system (for example, graphene oxide)11; (iii) undesirable Gibbs free energy for H2 evolution; (iv) insufficient contact with water molecules due to lack of hydrophilic functionalities; and (v) instability and/or requirement of non-aqueous environment (for example, hydrogenases and their mimics)12,13. Therefore, it is highly desirable to seek a brand-new family of materials as the next generation co-catalysts that can overcome these drawbacks. MXene, a new family of over 60 two-dimensional (2D) metal carbides, nitrides or carbonitrides14,15, has shown great potential as electrodes in (Li)-ion batteries16 and supercapacitors17. Notably, their distinguished characteristics render them highly promising for solving the above problems as: (i) MXene possesses numerous hydrophilic functionalities (–OH and –O) on its surface, enabling it to easily construct strong connection with various semiconductors; (ii) the excellent metallic conductivity of MXene assures efficient charge-carrier transfer; (iii) the exposed terminal metal sites (for example, Ti, Nb or V) on MXene might lead to much stronger redox reactivity than that of the carbon materials18; (iv) the presence of numerous hydrophilic functionalities on MXene promotes its strong interaction with water molecules; and (v) MXene can stably function in aqueous solutions. Considering the above outstanding properties of the MXene family, it is anticipated that MXene will be a promising material to be employed in photocatalysis. However, to the best of our knowledge, there is no report on exploring MXene as a co-catalyst for photocatalysis. Herein, we utilize density functional theory (DFT) calculations to explore the potential of Ti3C2 MXene as a H2 evolution co-catalyst. On the basis of theoretical studies, we report a rational design and synthesis of Ti3C2 nanoparticles (NPs) and merge them with a chosen photocatalyst, CdS, to successfully achieve a super high visible-light photocatalytic H2-production activity. The origin of this high activity is studied by both experimental techniques and theoretical investigations. Moreover, the general function of Ti3C2 NPs as an active co-catalyst for other photocatalysts is also confirmed, illustrating the considerable potential of MXene family materials to replace rare and costly Pt in photocatalysis/photoelectrocatalysis. RESULTS Theoretical exploration of Ti3C2 MXene as a co-catalyst To explore the possibility of using Ti3C2 MXene as a highly efficient and low-priced co-catalyst to promote H2 production, we have conducted a series of theoretical investigations based on DFT calculations. A highly active co-catalyst can not only rapidly extract photo-induced electrons from a photocatalyst to its surface, but also efficiently catalyse the H2 evolution on its surface, by using those electrons6. Herein, we first focus on the H2 evolution activity to evaluate whether Ti3C2 is an excellent candidate. Usually, the overall H2 evolution reaction (HER) pathway can be summarized by a three-state diagram, composed of an initial state H++e−, an intermediate adsorbed H*, and a final product ½H2 (refs 19, 20). The Gibbs free energy of the intermediate state, |ΔGH*|, is regarded as a major indicator of the HER activity for various catalysts. The most desirable value for |ΔGH*| should be zero20. For example, the highly active and well-known HER catalyst, Pt, shows a near-zero value of ΔGH*≈−0.09 eV (refs 21, 22). Thus, we performed DFT studies to calculate ΔGH* for atomic H adsorption on the surface of O-terminated Ti3C2, pure Ti3C2 and F-terminated Ti3C2, respectively. Their structural models are displayed in Fig. 1a and Supplementary Figs 1,2, respectively. Pure Ti3C2 exhibits a largely negative ΔGH*=−0.927 eV (Supplementary Fig. 3a), suggesting too strong chemical adsorption of H* on its surface. Meanwhile, a largely positive ΔGH*=1.995 eV is observed for F-terminated Ti3C2 (Supplementary Fig. 3b), indicating very weak H* adsorption and easy product desorption. Unfortunately, both conditions are unfavourable for HER. Surprisingly, O-terminated Ti3C2 shows a near-zero value of |ΔGH*|=0.00283, eV at its optimal H* coverage (θ=1/2) (Fig. 1b; Supplementary Table 1). This value is even much lower than that of Pt or highly active earth-abundant HER catalysts (Fig. 1c), for example, MoS2 (ΔGH*=0.08 eV)23 or WS2 (ΔGH*=0.22 eV)23, clearly indicating the remarkable HER activity of O-terminated Ti3C2 from the viewpoint of thermodynamics. [Figure: Density function theory calculation studies of O-terminated Ti3C2.(a) The side and top views of the structure model for a 4 × 4 × 1 O-terminated Ti3C2 supercell. Grey, red and cyan spheres denote C, O and Ti atoms, respectively. (b) The calculated free-energy diagram of HER at the equilibrium potential (U=0 V) on the surface of a 2 × 2 × 1 O-terminated Ti3C2 supercell at different H* coverage (1/8, 1/4, 3/8, 1/2, 5/8 and 3/4) conditions (the side and top views of a 2 × 2 × 1 O-terminated Ti3C2 supercell at 1/2 H* coverage are shown in the inset). (c) The calculated free-energy diagram of HER at the equilibrium potential (U=0 V) on the surface of a 2 × 2 × 1 O-terminated Ti3C2 supercell at 1/2 H* coverage, and the referenced Pt (ref. 21, 22) MoS2 (ref. 23), and WS2 (ref. 23). (d) The calculated band structure of O-terminated Ti3C2. (e) The total density of states (TDOS) and partial density of states (PDOS) for O-terminated Ti3C2.] Apart from extraordinary HER activity, a highly active co-catalyst must efficiently extract the

Read the complete text