Calcium and Excitation-Contraction Coupling in the Heart.

Eisner DA, Caldwell JL, Kistamás K, Trafford AW. · 2017

Read Calcium and Excitation-Contraction Coupling in the Heart. by Eisner DA, Caldwell JL, Kistamás K, Trafford AW. (2017) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5497788.txt.

Introduction

Eisner and co-authors present a review in Circulation Research on calcium control in the heart. Each heartbeat is triggered by a rise in calcium inside heart cells. The level must soar during contraction, then crash for refilling. Most of the calcium pours from an internal store, the sarcoplasmic reticulum. A small entry of calcium from outside triggers that big release.

Precise anatomy makes the trigger work, they explain. Channels sit nanometers apart in junctions called dyads. Pumps then haul calcium back so inflow matches outflow every beat. Buffers, leaks, and mitochondria fine-tune the cycle. Small errors here ripple into weak or erratic beats.

Catalog record

CREATOREisner DA, Caldwell JL, Kistamás K, Trafford AW.
YEAR2017
COLLECTIONPAPERS
FORMATTXT
FILE SIZE95 KB
LICENSECC BY 4.0
RIGHTSCC BY
SOURCEEurope PMC

Source: https://europepmc.org/articles/PMC5497788

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Calcium and Excitation-Contraction Coupling in the Heart By David A. Eisner, Jessica L. Caldwell, Kornél Kistamás, Andrew W. Trafford Published in: Circulation Research DOI: 10.1161/CIRCRESAHA.117.310230 ABSTRACT Cardiac contractility is regulated by changes in intracellular Ca concentration ([Ca2+]i). Normal function requires that [Ca2+]i be sufficiently high in systole and low in diastole. Much of the Ca needed for contraction comes from the sarcoplasmic reticulum and is released by the process of calcium-induced calcium release. The factors that regulate and fine-tune the initiation and termination of release are reviewed. The precise control of intracellular Ca cycling depends on the relationships between the various channels and pumps that are involved. We consider 2 aspects: (1) structural coupling: the transporters are organized within the dyad, linking the transverse tubule and sarcoplasmic reticulum and ensuring close proximity of Ca entry to sites of release. (2) Functional coupling: where the fluxes across all membranes must be balanced such that, in the steady state, Ca influx equals Ca efflux on every beat. The remainder of the review considers specific aspects of Ca signaling, including the role of Ca buffers, mitochondria, Ca leak, and regulation of diastolic [Ca2+]i. The process of excitation–contraction (E–C) coupling links the electric excitation of the surface membrane (action potential) to contraction. Since the initial measurements in cardiac muscle,1,2 an enormous amount of work has shown the underlying changes of cytoplasmic calcium concentration ([Ca2+]i).3,4 Ca binds to troponin resulting in sliding of the thick and thin filaments, cell shortening, and thence the development of pressure within the ventricle and ejection of blood. Force, therefore, depends on the amount of Ca bound to troponin. This will be a function of both the magnitude and duration of the rise of [Ca2+]i. It will also depend on the strength of Ca binding, a factor that can be altered genetically,5 is controlled by factors such as phosphorylation6 and may form the basis of therapeutic interventions.7 Nevertheless, the major factor that regulates contraction is the level of intracellular Ca. As well as focusing on the increase of [Ca2+]i during systole, it is important to remember that proper cardiac function requires that force and [Ca2+]i relax quickly to low enough levels such that the heart can refill with blood. Therefore, both diastolic and systolic [Ca2+]i must be tightly regulated; this regulation is the subject of the current article. The events that occur in E–C coupling are now well established (Figure 1). The process depends not only on a combination of the properties of Ca channels and transporters but, equally importantly, also on their precise locations and spatial arrangement. The depolarization produced by the action potential opens L-type Ca channels situated in the surface membrane and transverse tubules. The resulting entry of a small amount of Ca results in a large increase of [Ca2+]i in the dyadic space (the region bounded by the t-tubule and sarcoplasmic reticulum [SR]). This increase of [Ca2+]i makes the SR Ca release channels (ryanodine receptors [RyR]) open thereby releasing a much larger amount of Ca from the SR in a process termed calcium-induced calcium release. The magnitude of the rise of [Ca2+]i depends not only on the structures mentioned above but also on Ca binding to buffers and uptake into organelles including mitochondria. For relaxation to occur, Ca must be removed from the cytoplasm. This requires that the RyRs close and then that Ca is pumped (1) back into the SR, by the SERCA (SR Ca-ATPase) and (2) out of the cell, largely by the sodium–calcium exchange (NCX). [Figure: Structures involved in Ca cycling. A, Schematic diagram. This shows surface membrane, transverse tubule, sarcoplasmic reticulum (SR), and mitochondria, as well as the various channels and transporters mentioned in the text. B, High-resolution transverse section of a ventricular myocyte showing t-tubule network. Reprinted from Jayasinghe et al39 with permission of the publisher. Copyright ©2009, Biophysical Society. C, Cartoon of dyad emphasizing the major proteins involved in Ca cycling. B-AR indicates beta adrenoceptor; MCU, mitochondrial Ca uniporter; NCX, sodium–calcium exchange; NCLX, mitochondrial Na–Ca exchange; PMCA, plasma membrane Ca-ATPase; RyR, ryanodine receptor; and SERCA, sarco/endoplasmic reticulum Ca-ATPase.] The remainder of this review is in 3 sections. In the first, we discuss recent studies on the spatial organization of the structures responsible for calcium cycling. The second addresses the general principles that determine how the amplitude of the Ca transient is controlled, with particular reference to understanding the importance of Ca flux balance. In the final section, we consider specific steps in Ca signaling. STRUCTURAL CONSIDERATIONS: THE DYAD Transverse (t-) tubules are 150- to 300-nm-wide8,9 deep invaginations of the surface sarcolemma occurring at the junction of each sarcomere (z-line). They are observed in ventricular myocytes from all mammalian species studied. E–C coupling depends on the close association between the SR network and t-tubule membranes.10,11 The junctional SR makes close contact with the t-tubule membrane so that RyRs on the SR are very closely apposed (≈15 nm12) to L-type Ca2+ channels on the t-tubule thus forming the cardiac dyad that is fundamental to the processes initiating the systolic Ca2+ transient. When viewed end on, t-tubules are seen to radiate throughout the ventricular cell (Figure 1B). The close association between the t-tubule and SR ensures the synchronous rise of [Ca2+]i during systole.13 Indeed, chemical detubulation in ventricular myocytes with formamide results in a markedly heterogenous Ca2+ transient commencing at the surface sarcolemma with a slowly propagating wave of Ca2+ release traveling to the cell center.14 This has similar spatial properties to the systolic Ca2+ transient in those atrial cells lacking t-tubules.15,16 (Although outside the scope of the present article, it should be noted that atrial myocytes from larger mammalian species have a well-developed ventricular-like t-tubule network17–19). The cardiac dyad is a specialized signaling nexus concerned primarily with the initiation of cardiac contraction. Classically, it consists of clusters of L-type Ca2+ channels on the sarcolemma closely apposed (≈15 nm) across the dyadic cleft to clusters of RyRs on the SR membrane. In addition to these basic requirements for excitation–contraction coupling, the cardiac dyad may also be considered as containing additional structures that may contribute to or modulate Ca2+ release from the SR during systole (Figure 1). Of these, the most extensively studied is NCX that has been argued via its reverse-mode action to contribute to Ca2+ influx early during the action potential.20 However, assuming dyadic and cytosolic intracellular Na+ are similar during diastole (5–10 mmol/L,21) such reverse-mode NCX is thermodynamically limited leading to the suggestion that Na+ entry via voltage-gated Na+ channels (INa) may raise dyadic Na+ sufficiently early during the action potential to facilitate effective reverse-mode NCX. Indeed, Leblanc and Hulme22 first demonstrated the modulating effect of INa on Ca2+ release from the SR. Subsequent experiments suggested that a subpopulation of neuronal Na+ channels are localized to the t-tubule and thence dyadic environ23–25; however, Brette et al26 also concluded that although neuronal Na+ channels were concentrated on the t-tubule, they were not required for cardiac excitation–contraction coupling. Major changes occur in dyadic structure in heart failure with a reduction in the number of t-tubules in the ventricle27and, in the atrium, the loss of virtually all.18 T-tubule loss and the consequent loss of tight coupling between L-type Ca2+ channels and RyRs result in

Read the complete text