Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics.
Hoke ET, Slotcavage DJ, Dohner ER, Bowring AR, Karunadasa HI, McGehee MD. · 2015
Read Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics. by Hoke ET, Slotcavage DJ, Dohner ER, Bowring AR, Karunadasa HI, McGehee MD. (2015) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5491962.txt.
Introduction
Hoke and co-authors report a materials study in Chemical Science on mixed-halide perovskites for solar cells. Blending bromide and iodide tunes these crystals' light absorption. Wider-bandgap blends should yield higher cell voltages. In practice their voltage stalls oddly low. The team probed thin films to find out why.
Light itself reshapes the material within a minute, they report. A new glow near 1.68 electron volts takes over the emission. The alloy seems to split into iodide-rich pockets under light. Those pockets pin the voltage at the lower energy. Left in the dark, the films recover their first state. The flaw is real but self-healing.
Catalog record
| CREATOR | Hoke ET, Slotcavage DJ, Dohner ER, Bowring AR, Karunadasa HI, McGehee MD. |
|---|---|
| YEAR | 2015 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 23 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics† By Eric T Hoke, Daniel J Slotcavage, Emma R Dohner, Andrea R Bowring, Hemamala I Karunadasa, Michael D McGehee Published in: Chemical Science DOI: 10.1039/c4sc03141e ABSTRACT A reversible photo-induced instability has been found in mixed-halide photovoltaic perovskites that limits the open circuit voltage in solar cells. INTRODUCTION Hybrid perovskites have attracted significant attention over the past few years as absorbers for solar cells1–4 with power conversion efficiencies (PCEs) exceeding 15%.5–8 One attractive attribute of hybrid perovskites as photovoltaic absorbers is the ability to continuously tune the absorption onset by alloying different halides into the structure. For example, the bandgap of (MA)Pb(BrxI1–x)3 (MA = CH3NH3) can be continuously tuned over the range 1.6–2.3 eV,9 making these materials suitable both for single-junction solar cells and for the larger bandgap absorber of tandem solar cells. Photovoltaic devices containing (MA)Pb(BrxI1–x)3 have demonstrated PCEs of 4–16% for a wide range of halide ratios,8–12 and an open circuit voltage (V OC) of 1.5 V has been achieved using the largest bandgap perovskite of this family: (MA)PbBr3.13 Although solar cells containing (MA)PbI3 have obtained V OC's of up to 1.15 V,14 solar cells with mixed-halide perovskites have so far not produced the larger V OC's that may be expected from their larger bandgaps. Several groups have reported a decrease in V OC, despite the increase in optical band gap, in (R)Pb(BrxI1–x)3 (R = CH3NH3 or HC(NH2)2) absorbers for x > 0.25.9–11,15 We examined the optical properties of (MA)Pb(BrxI1–x)3 thin films to understand the poor voltage performance of solar cells with the bromide-rich alloys. We find that the photoluminescence (PL) spectra of these materials discretely red-shift to ∼1.68 eV under illumination intensities of less than 1 sun in less than a minute at room temperature. This red-shift is accompanied by an increase in absorption between 1.68 eV and the bandgap. X-ray diffraction (XRD) patterns of the thin films show that the original peaks split upon illumination and revert back to their original line shape after a few minutes in the dark. Our observations so far are consistent with light-induced segregation of the mixed-halide alloy. We hypothesize that photoexcitation induces halide migration, which results in lower-bandgap, iodide-rich domains that pin the PL and V OC at a lower energy compared to the alloy. RESULTS AND DISCUSSION We measured the absorption coefficients of (MA)Pb(BrxI1–x)3 over the full range of compositions to characterize band-edge states and optical bandgaps (Fig. 1). Thin films of (MA)Pb(BrxI1–x)3 were spun from equimolar mixtures of 0.55 M PbI2 + (MA)I and PbBr2 + (MA)Br solutions in dimethyl formamide and annealed for 5 minutes at 100 °C in dry air. The phase purity of the films was confirmed with XRD; their pseudo-cubic lattice parameters agree with previous reports (ESI, Fig. S1†).9 Photocurrent spectroscopy (i.e., external quantum efficiency) measurements were performed on (MA)Pb(BrxI1–x)3 photovoltaic devices using a lock-in amplifier to measure weak absorption from band-edge states. At these weakly absorbed wavelengths, the photocurrent is proportional to the perovskite layer absorption coefficient. We combined these measurements with diffuse transmission and reflection measurements on films of varying thickness to obtain the full absorption spectra. These spectra continuously blue-shift upon increasing bromide content as previously reported.9 All perovskites in this family (except for x = 0.5) have strong absorption onsets, yielding absorption coefficients above 1 × 104 cm–1 at energies only 0.1 eV above the bandgap. This property is highly desirable for thin-film photovoltaic absorbers. These absorption onsets correspond to Urbach energies in the range 12–17 meV. These values are similar to the reported value of 15 meV for (MA)PbI3,16,17 indicating that mixed halide films are homogeneous in composition. In contrast, the x = 0.5 thin films exhibit a more gradual absorption onset, suggesting the presence of minority, iodide-rich domains (x ∼ 0.2). Photothermal deflection spectroscopy (PDS) measurements corroborate the sharp absorption onset for all compositions except for x = 0.5 (Fig. S2†). [Figure: Absorption coefficient of (MA)Pb(BrxI1–x)3 measured by diffuse spectral reflection and transmission measurements on thin films and photocurrent spectroscopy of solar cells. Inset: photograph of (MA)Pb(BrxI1–x)3 photovoltaic devices from x = 0 to x = 1 (left to right).] The initial PL spectra for (MA)Pb(BrxI1–x)3 at low illumination intensities also continuously blue-shift upon increasing bromide content (Fig. S3†). However, for perovskites with 0.2 < x < 1 we find that an additional PL peak forms at ∼1.68 eV and grows in intensity under continuous illumination (Fig. 2a). The position of this new peak is independent of halide composition and bandgap (Fig. 2b). After less than a minute of continuous visible-light soaking (argon ion laser, 457 nm, 15 mW cm–2) the PL intensity from the new low-energy peak becomes more than an order of magnitude more intense than the original peak (Fig. 2c). Films with higher iodide content exhibited higher initial luminescence efficiencies and required more light soaking for the new PL feature to dominate the original PL. We find that this PL spectral change is not dependent upon the spectrum or coherence of the light source and that it occurs as long as the light is absorbed by the perovskite: we observed similar changes in the PL spectra upon light soaking with various white LEDs, 375 nm and 457 nm laser excitation, and red LED excitation (∼637 nm) for the perovskites that absorb this wavelength. Notably, these changes are reversible; the original PL spectra return after the materials are left in the dark for 5 minutes. Moreover, the spectra can be repeatedly cycled between these two states by turning on and off the excitation light (Fig. 2c and S4†). [Figure: (a) Photoluminescence (PL) spectra of an x = 0.4 thin film over 45 s in 5 s increments under 457 nm, 15 mW cm–2 light at 300 K. Inset: temperature dependence of initial PL growth rate. (b) Normalized PL spectra of (MA)Pb(BrxI1–x)3 thin films after illuminating for 5–10 minutes with 10–100 mW cm–2, 457 nm light. (c) PL spectra of an x = 0.6 thin film after sequential cycles of illumination for 2 minutes (457 nm, 15 mW cm–2) followed by 5 minutes in the dark.] To understand the origin of the new PL feature, we performed photocurrent spectroscopy measurements on photovoltaic devices containing (MA)Pb(BrxI1–x)3 before and after light soaking to characterize absorption from band-edge states (Fig. 3). A new absorption shoulder forms around 1.7 eV after light soaking, which completely disappears after the devices are left in the dark for 1 h. We speculate that these new PL and absorption features in the light-soaked mixed-halide perovskites are due to the formation of small, iodide-enriched domains with a lower bandgap compared to the alloy. The absorption shoulder in the light-soaked x = 0.6 alloy has an absorption coefficient similar to the expected value if ∼1% of the material converted into the x = 0.2 perovskite (Fig. 3). The observations of this absorption shoulder and additional PL peak at 1.68 eV were recently reported for (MA)Pb(Br0.4I0.6)3 and were attributed to the existence of multiple phases.17 However, the role of light soaking in producing these features was not examined. [Figure: Absorption spectra of an x = 0.6 film before (black) and after (red) white-light soaking for 5 minutes at 100