Coulomb engineering of the bandgap and excitons in two-dimensional materials.
Raja A, Chaves A, Yu J, Arefe G, Hill HM, Rigosi AF, Berkelbach TC, Nagler P, Schüller C, Korn T, Nuckolls C, Hone J, Brus LE, Heinz TF, Reichman DR, Chernikov A. · 2017
Read Coulomb engineering of the bandgap and excitons in two-dimensional materials. by Raja A, Chaves A, Yu J, Arefe G, Hill HM, Rigosi AF, Berkelbach TC, Nagler P, Schüller C, Korn T, Nuckolls C, Hone J, Brus LE, Heinz TF, Reichman DR, Chernikov A. (2017) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/europmc-pmc5418602.txt.
Introduction
Raja and co-authors show that the surroundings can tune the bandgap of atomically thin crystals. Their study appeared in Nature Communications. Two-dimensional materials feel Coulomb forces with unusual strength. Thinness leaves charges poorly screened. The nearby dielectric material sets that screening. Change the surroundings, and electron energies should shift. The team tested this idea on monolayers. They used tungsten disulfide and tungsten diselenide.
Tuning worked at a large scale. The electronic bandgap shifted by hundreds of millielectronvolts. Exciton binding energy shifted with it. Excitons are bound electron-hole pairs. In these monolayers they bind far tighter than usual. The authors then built an in-plane heterostructure. Different zones of one sheet sat on different dielectrics. The bandgap thus varied across the plane. Such patterning points toward lateral junctions. Those junctions could reach nanoscale resolution. Coulomb engineering adds a fresh lever for device design.
Catalog record
| CREATOR | Raja A, Chaves A, Yu J, Arefe G, Hill HM, Rigosi AF, Berkelbach TC, Nagler P, Schüller C, Korn T, Nuckolls C, Hone J, Brus LE, Heinz TF, Reichman DR, Chernikov A. |
|---|---|
| YEAR | 2017 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38 KB |
| LICENSE | CC BY 4.0 |
| RIGHTS | CC BY |
| SOURCE | Europe PMC |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Coulomb engineering of the bandgap and excitons in two-dimensional materials By Archana Raja, Andrey Chaves, Jaeeun Yu, Ghidewon Arefe, Heather M Hill, Albert F Rigosi, Timothy C Berkelbach, Philipp Nagler, Christian Schüller, Tobias Korn, Colin Nuckolls, James Hone Published in: Nature Communications DOI: 10.1038/ncomms15251 ABSTRACT Abstract The ability to control the size of the electronic bandgap is an integral part of solid-state technology. Atomically thin two-dimensional crystals offer a new approach for tuning the energies of the electronic states based on the unusual strength of the Coulomb interaction in these materials and its environmental sensitivity. Here, we show that by engineering the surrounding dielectric environment, one can tune the electronic bandgap and the exciton binding energy in monolayers of WS2 and WSe2 by hundreds of meV. We exploit this behaviour to present an in-plane dielectric heterostructure with a spatially dependent bandgap, as an initial step towards the creation of diverse lateral junctions with nanoscale resolution. The precise and efficient manipulation of electrons in solid-state devices has driven remarkable progress across fields from information processing and communication technology to sensing and renewable energy. The ability to engineer the electronic bandgap is crucial to these applications1. Several methods currently exist to tune a material's bandgap by altering, for example, its chemical composition, spatial extent (quantum confinement), background doping or lattice constant via mechanical strain2. Such methods are typically perturbative in nature and not suitable for making arbitrarily shaped, atomically sharp variations in the bandgap. Consequently, there is a motivation to approach this important problem from a fresh perspective. The emerging class of atomically thin two-dimensional (2D) materials derived from bulk van der Waals crystals offers an alternative route to bandgap engineering. Within the family of 2D materials, much recent research has focused on the semiconducting transition-metal dichalcogenides (TMDCs)—MX2 with M=Mo, W and X=S, Se, Te3. In the monolayer limit, these TMDCs are direct-bandgap semiconductors with the optical gap in the visible and near-infrared spectral range4,5. They combine strong inter- and intraband light-matter coupling6,7 with intriguing spin-valley physics8,9,10, high charge carrier mobilities11,12, ready modification of the in-plane material structure13,14,15,16 and seamless integration into a variety of van der Waals heterostructures17. Importantly, the Coulomb interactions between charge carriers in atomically thin TMDCs are remarkably strong18,19,20,21. This leads to a significant renormalization of the electronic energy levels and increase in the quasiparticle bandgap. The Coulomb interactions are also reflected in the binding energies of excitons, that is, bound electron–hole pairs2, that are more than an order of magnitude greater in TMDC monolayers than in typical inorganic semiconductors22,23,24,25,26. The strength of the Coulomb interaction in these materials originates from weak dielectric screening in the 2D limit21,27,28. For distances exceeding few nanometres, the screening is determined by the immediate surroundings of the material, which can be vacuum or air in the ideal case of suspended samples. More generally, the interaction between charge carriers is highly sensitive to the local dielectric environment23,24,26,27,28,29,30,31,32, as seen in measured changes of the exciton Bohr radius33 and in theoretical analysis of the environmental screening34,35. Correspondingly, both the electronic bandgap and the exciton binding energy are expected to be tunable by means of a deliberate change of this environment, as illustrated in Fig. 1a, like the influence of a solvent on the properties of molecules, quantum dots, carbon nanotubes and other nanostructures suspended in solution36,37,38. In addition, passivated and chemically inert van der Waals surfaces allow atomically thin layers to be brought into close proximity while still retaining the intrinsic properties and functionality of the individual components17. These observations motivate a programme to explore the concept of Coulomb engineering of the bandgap by local changes in the dielectric environment. This strategy offers a means of locally tuning the energies of the electronic states in 2D materials, even allowing in-plane heterostructures down to nanometre length scales34. As a result, this approach not only effectively demonstrates the validity of fundamental physics with respect to the Coulomb interaction in atomically thin systems, but offers a viable opportunity to directly harness these many-body phenomena for future technology. [Figure: Engineering Coulomb interactions through environmental screening.(a) Schematic illustration of a semiconducting 2D TMDC material, partially covered with an ultra-thin dielectric layer. The strong Coulomb interaction between charged particles in low-dimensional systems affects both the exciton binding energy and the quasiparticle bandgap. The interaction can be strongly modified by modulating the environmental dielectric screening on atomic length scales. (b) An optical micrograph of the heterostructure under study: monolayer WS2 covered with a bilayer of graphene. Dotted circles indicate positions for the optical measurements. (c) Illustration of the optical response of an ideal 2D semiconductor, including exciton ground and excited state resonances and the onset of the (quasiparticle) bandgap. (d) Reflectance contrast spectra of the bare bilayer graphene, monolayer WS2 and the resulting WS2/graphene heterostructure at a temperature of 70 K. (e) First derivatives of the reflectance contrast spectra in d (after averaging over a 20 meV interval), offset for clarity. Peak positions of the exciton ground state (n=1) and the first excited state (n=2) resonances, roughly corresponding to the points of inflection, are indicated by dashed lines; Δ12 denotes the respective energy separations. The observed decrease of Δ12 across the in-plane boundary of the heterostructure is indicative of a reduction of the exciton binding energy and bandgap by more than 100 meV due to the presence of the adjacent graphene bilayer.] In this report, we provide direct experimental demonstration of control of the bandgap and exciton binding energy in 2D materials using Coulomb engineering through the modification of the local dielectric environment. By placing layers of graphene and hexagonal boron nitride above and below monolayers (1L) of WS2 and WSe2, we achieve tuning of the electronic quasiparticle bandgap, as well as of the exciton binding energy of the two TMDC monolayers by several 100's of meV. We note that graphene is particularly well-suited to demonstrate and explore the concept of dielectric heterostructures. It combines a high dielectric screening with the possibility of adding an arbitrary number of additional layers as thin as only 3 Å. Furthermore, the TMDC/graphene structures have been heavily studied recently in a variety of contexts with potential applications in optoelectronics and photovoltaics39,40,41,42. Screening is found to be maximized for just a few layers of graphene as the surrounding dielectric, suggesting that Coulomb-engineered bandgaps can be realized with a spatial resolution on the nanoscale. Moreover, an in-plane heterostructure with a spatially dependent electronic bandgap is shown to exhibit a potential well on the order of more than 100 meV. Our results are supported by calculations employing a quantum mechanical Wannier exciton model21. The dielectric screening leading to the bandgap renormalization can be treated in a semiclassical electrostatic framework that accounts for the underlying substrate and the nanostructured dielectric environment, which we computed using a recently developed quantum electrostatic heterostructure approach30. RESULTS Coulomb engineering of monolayer WS2 An optical micrograph of a typical sample, 1L WS2 partially covered with bilayer (2L) graphene, is presented in Fig. 1b. To monitor the quasiparticle bandgap of the material, we first identify the energies of the excitonic resonances in different dielectric environments using optical reflectance spectroscopy. The relationship between exciton Rydberg states and the electronic bandgap is shown in the schematic illustration